remote desktopwindows
I have some severs I manage VIA Remote Desktop. They do not listen on port 3389. I can connect with out issue doing IP:PORT.
I now manage so many I'm trying to use the Remote Desktop snap-in for the management console. But it will not let you enter a colon in the host name.
Is there another way to specify the port?
Here is link to the snap-in.
EDIT:
I'm using XP… yeah I know I'm behind.
You mentioned that you cannot access your server "from a location outside the house". Does it mean that you cannot access your home server from any location, or just from work?
If you cannot establish an RDP session to your server from any location, and assuming that everything is properly configured, I'd suggest switching RDP default port (3389) to another one.
For example, try using port 33890 on your terminal server. I've seen this same problem a couple of times, and it happened because the customer's ISP was blocking traffic on port 3389. If the ISP blocks traffic by port number, then changing the default port to another one will let you solve this issue. However, if the ISP is filtering traffic at the application level (i.e., Layer 7), this tip will not help.
If the problem you're having only happens when you try to connect from work, that's probably because you're behind an HTTP proxy, which usually will only forward HTTP/HTTPS traffic, and then you won't be able to use other protocols (like RDP or VNC).
You can check that by using the telnet command, as pnti suggested. If telnetting fails, then it's quite likely that you won't be able to establish an RDP or VNC session from work to your home server.
Best Answer
You can't do it with the snap-in, but as others have suggested you can use a third party program to do it. I use RoyalTS myself.