I'm running Windows Server 2012 with newest updates etc. We've at all times restricted our RDP with a whitelist with IP in the Scope properties of the Remote Desktop - User-mode rule inside the Advanced Firewall.
For some reason, the scope has stopped working and I can't find out why. Everyone is able to connect to it, and it doesn't seem to have any effect at all. I need some help troubleshooting this issue as it does not give any sense, and I can't come up with any changes made on the server which could cause this. My other firewall rules seem to work perfectly fine.
Property: Remote Desktop – User-Mode
General: Enabled -> YES
Action: Allow the connection
Scope
Local IP Adress: Any IP address
Remote IP Address: These IP addresses: (multiple IPs).
I even removed my own IP address from there, and it still doesn't work.
Best Answer
Solved. The profile properties as metioned by Brian were correct, though I found the issue, there were an additional conflicting rule in my settings which allowed this port to be open after all with no scope.