This may be a relatively easy question. However it's giving me a headache this morning. I have a ZyXel GS1920-48HP. Last week it lost its config. So I have to reconfigure. This switch had three vlans and as I'm reconfiguring the new VLANs aren't working
Ports 1-44 VLAN 1 (Fixed) Untagged
Ports 45-46 VLAN 2 (Fixed) Untagged
Ports 47-48 VLAN 3 (Fixed) untagged
1-44 are my production network going with connections going to PCs and one to LAN INT on router
45-46 are public wireless one going to POE access point, other going to LAN2 INT on router
47-48 are going to a private wireless AP that has to be a separate LAN, other going to configured WLAN port on router.
As of right now VLANs cannot communicate with each other, which is correct. All ports in VLAN 1 are fine. VLAN 2 ports cannot communicate with each other.
Best Answer
In ZyXEL switches, when you create the VLANs and give ports access to those VLANs it doesn't automatically assign those ports to the VLANs. I had to find another page to assign the ports to the correct VLANs.