Asking browsers to cache as aggressively as possible

browsercachinghttphttp-headers

This is about a web app that serves images. Since the same request will always return the same image, I want the accessing browsers to cache the images as aggressively as possible. I pretty much want to tell the browser

Here's your image. Go ahead and keep it; it's really not going to change for the next couple of days. No need to come back. Really. I promise.

I do, so far, set

Cache-Control: public, max-age=86400
Last-Modified: (some time ago)
Expires: (two days from now)

and of course return a 304 not modified if the request has the appropriate If-Modified-Since header.

Is there anything else I can do (or anything I should do differently) to get my message across to the browsers?

The app is hosted on the Google App Engine, in case that matters.

Best Answer

You may be interested in checking out the following Google Code article:

Optimize caching: Leverage browser caching

In a nutshell, all modern browsers should be able to cache your images appropriately as instructed, with those HTTP headers.

Introduction

The correct minimum set of headers that works across all mentioned clients (and proxies):

Cache-Control: no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: 0

The Cache-Control is per the HTTP 1.1 spec for clients and proxies (and implicitly required by some clients next to Expires). The Pragma is per the HTTP 1.0 spec for prehistoric clients. The Expires is per the HTTP 1.0 and 1.1 specs for clients and proxies. In HTTP 1.1, the Cache-Control takes precedence over Expires, so it's after all for HTTP 1.0 proxies only.

If you don't care about IE6 and its broken caching when serving pages over HTTPS with only no-store, then you could omit Cache-Control: no-cache.

Cache-Control: no-store, must-revalidate
Pragma: no-cache
Expires: 0

If you don't care about IE6 nor HTTP 1.0 clients (HTTP 1.1 was introduced in 1997), then you could omit Pragma.

Cache-Control: no-store, must-revalidate
Expires: 0

If you don't care about HTTP 1.0 proxies either, then you could omit Expires.

Cache-Control: no-store, must-revalidate

On the other hand, if the server auto-includes a valid Date header, then you could theoretically omit Cache-Control too and rely on Expires only.

Date: Wed, 24 Aug 2016 18:32:02 GMT
Expires: 0

But that may fail if e.g. the end-user manipulates the operating system date and the client software is relying on it.

Other Cache-Control parameters such as max-age are irrelevant if the abovementioned Cache-Control parameters are specified. The Last-Modified header as included in most other answers here is only interesting if you actually want to cache the request, so you don't need to specify it at all.

How to set it?

Using PHP:

header("Cache-Control: no-cache, no-store, must-revalidate"); // HTTP 1.1.
header("Pragma: no-cache"); // HTTP 1.0.
header("Expires: 0"); // Proxies.

Using Java Servlet, or Node.js:

response.setHeader("Cache-Control", "no-cache, no-store, must-revalidate"); // HTTP 1.1.
response.setHeader("Pragma", "no-cache"); // HTTP 1.0.
response.setHeader("Expires", "0"); // Proxies.

Using ASP.NET-MVC

Response.Cache.SetCacheability(HttpCacheability.NoCache);  // HTTP 1.1.
Response.Cache.AppendCacheExtension("no-store, must-revalidate");
Response.AppendHeader("Pragma", "no-cache"); // HTTP 1.0.
Response.AppendHeader("Expires", "0"); // Proxies.

Using ASP.NET Web API:

// `response` is an instance of System.Net.Http.HttpResponseMessage
response.Headers.CacheControl = new CacheControlHeaderValue
{
    NoCache = true,
    NoStore = true,
    MustRevalidate = true
};
response.Headers.Pragma.ParseAdd("no-cache");
// We can't use `response.Content.Headers.Expires` directly
// since it allows only `DateTimeOffset?` values.
response.Content?.Headers.TryAddWithoutValidation("Expires", 0.ToString());

Using ASP.NET:

Response.AppendHeader("Cache-Control", "no-cache, no-store, must-revalidate"); // HTTP 1.1.
Response.AppendHeader("Pragma", "no-cache"); // HTTP 1.0.
Response.AppendHeader("Expires", "0"); // Proxies.

Using ASP.NET Core v3

// using Microsoft.Net.Http.Headers
Response.Headers[HeaderNames.CacheControl] = "no-cache, no-store, must-revalidate";
Response.Headers[HeaderNames.Expires] = "0";
Response.Headers[HeaderNames.Pragma] = "no-cache";

Using ASP:

Response.addHeader "Cache-Control", "no-cache, no-store, must-revalidate" ' HTTP 1.1.
Response.addHeader "Pragma", "no-cache" ' HTTP 1.0.
Response.addHeader "Expires", "0" ' Proxies.

Using Ruby on Rails:

headers["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
headers["Pragma"] = "no-cache" # HTTP 1.0.
headers["Expires"] = "0" # Proxies.

Using Python/Flask:

response = make_response(render_template(...))
response.headers["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
response.headers["Pragma"] = "no-cache" # HTTP 1.0.
response.headers["Expires"] = "0" # Proxies.

Using Python/Django:

response["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
response["Pragma"] = "no-cache" # HTTP 1.0.
response["Expires"] = "0" # Proxies.

Using Python/Pyramid:

request.response.headerlist.extend(
    (
        ('Cache-Control', 'no-cache, no-store, must-revalidate'),
        ('Pragma', 'no-cache'),
        ('Expires', '0')
    )
)

Using Go:

responseWriter.Header().Set("Cache-Control", "no-cache, no-store, must-revalidate") // HTTP 1.1.
responseWriter.Header().Set("Pragma", "no-cache") // HTTP 1.0.
responseWriter.Header().Set("Expires", "0") // Proxies.

Using Clojure (require Ring utils):

(require '[ring.util.response :as r])
(-> response
  (r/header "Cache-Control" "no-cache, no-store, must-revalidate")
  (r/header "Pragma" "no-cache")
  (r/header "Expires" 0))

Using Apache .htaccess file:

<IfModule mod_headers.c>
    Header set Cache-Control "no-cache, no-store, must-revalidate"
    Header set Pragma "no-cache"
    Header set Expires 0
</IfModule>

Using HTML:

<meta http-equiv="Cache-Control" content="no-cache, no-store, must-revalidate">
<meta http-equiv="Pragma" content="no-cache">
<meta http-equiv="Expires" content="0">

HTML meta tags vs HTTP response headers

Important to know is that when an HTML page is served over an HTTP connection, and a header is present in both the HTTP response headers and the HTML <meta http-equiv> tags, then the one specified in the HTTP response header will get precedence over the HTML meta tag. The HTML meta tag will only be used when the page is viewed from a local disk file system via a file:// URL. See also W3 HTML spec chapter 5.2.2. Take care with this when you don't specify them programmatically because the webserver can namely include some default values.

Generally, you'd better just not specify the HTML meta tags to avoid confusion by starters and rely on hard HTTP response headers. Moreover, specifically those <meta http-equiv> tags are invalid in HTML5. Only the http-equiv values listed in HTML5 specification are allowed.

Verifying the actual HTTP response headers

To verify the one and the other, you can see/debug them in the HTTP traffic monitor of the web browser's developer toolset. You can get there by pressing F12 in Chrome/Firefox23+/IE9+, and then opening the "Network" or "Net" tab panel, and then clicking the HTTP request of interest to uncover all detail about the HTTP request and response. The below screenshot is from Chrome:

Chrome developer toolset HTTP traffic monitor showing HTTP response headers on stackoverflow.com

I want to set those headers on file downloads too

First of all, this question and answer are targeted on "web pages" (HTML pages), not "file downloads" (PDF, zip, Excel, etc). You'd better have them cached and make use of some file version identifier somewhere in the URI path or query string to force a redownload on a changed file. When applying those no-cache headers on file downloads anyway, then beware of the IE7/8 bug when serving a file download over HTTPS instead of HTTP. For detail, see IE cannot download foo.jsf. IE was not able to open this internet site. The requested site is either unavailable or cannot be found.

Ajax – Are the PUT, DELETE, HEAD, etc methods available in most web browsers

No. The HTML 5 spec mentions:

The method and formmethod content attributes are enumerated attributes with the following keywords and states:

The keyword get, mapping to the state GET, indicating the HTTP GET method. The GET method should only request and retrieve data and should have no other effect.

The keyword post, mapping to the state POST, indicating the HTTP POST method. The POST method requests that the server accept the submitted form's data to be processed, which may result in an item being added to a database, the creation of a new web page resource, the updating of the existing page, or all of the mentioned outcomes.

The keyword dialog, mapping to the state dialog, indicating that submitting the form is intended to close the dialog box in which the form finds itself, if any, and otherwise not submit.

The invalid value default for these attributes is the GET state

I.e. HTML forms only support GET and POST as HTTP request methods. A workaround for this is to tunnel other methods through POST by using a hidden form field which is read by the server and the request dispatched accordingly.

However, GET, POST, PUT and DELETE are supported by the implementations of XMLHttpRequest (i.e. AJAX calls) in all the major web browsers (IE, Firefox, Safari, Chrome, Opera).