Asp.net-mvc – Where does the “business logic layer” fit in to an MVC application

asp.net-mvcbusiness-logic-layerdesign-patternsmodel-view-controller

First, before anyone screams dupe, I had a hard time summarizing it in a simple title. Another title might have been "What is the difference between a domain model and MVC model?" or "What is a model?"

Conceptually, I understand a Model to be the data used by the views and controller. Beyond that, there seems to be a great deal of differing opinions on what makes up the model. What's a domain model, versus an app model, vs a view model, vs a service model, etc..

For example, in a recent question I asked about the repository pattern, I was told point blank that the repository is part of the model. However, I have read other opinions that the model should be seperated from the persistence model and the business logic layer. After all, isn't the Repository pattern supposed to decouple the concrete persistence method from the model? Other people say there is a difference between the Domain model and the MVC model.

Let's take a simple example. The AccountController that is included with the MVC default project. I've read several opinions that the Account code included is of poor design, violates SRP, etc.. etc.. If one were to design a "proper" Membership model for an MVC application, what would that be?

How would you seperate the ASP.NET services (Membership provider, role provider, etc..) from the model? Or would you at all?

The way I see it, the model should be "pure", perhaps with validation logic.. but should be seperate from business rules (other than validation). For example, let's say you have a business rule that says someone must be emailed when a new account is created. That doesn't really belong in the model in my view. So where does it belong?

Anyone care to shed any light on this issue?

Best Answer

The way I have done it - and I'm not saying it is right or wrong, is to have my View and then a model that applies to my view. This model only has what is relevant to my view - including data annotations and validation rules. The controller only houses logic for building the model. I have a service layer which houses all business logic. My controllers call my service layer. Beyond that is my repository layer.

My domain objects are housed separately (in their own project, actually). They have their own data annotations and validation rules. My repository validates the objects in my domain before saving them into the database. Because every object in my domain inherits from a base class which has validation built in, my repository is generic and validates everything (and requires it inherits from the base class).

You might think that having two sets of models is duplication of code, and it is to an extent. But, there are perfectly reasonable instances where the domain object is not appropriate for the view.

Case in point is when working with credit cards - I have to require a cvv when processing a payment, but I cannot store the cvv (it is a $50,000 fine to do so). But, I also want you to be able to edit your credit card - change of address, name, or expiration date. But you aren't going to give me the number or the cvv when editing it, and I certainly am not going to put your credit card number in plain text on the page. My domain has these values required for saving a new credit card because you give them to me, but my edit model doesn't even include the card number or cvv.

Another benefit to so many layers is that if architected correctly, you can use structuremap or another IoC container and swap out pieces without detrimentally affecting your application.

In my opinion, controller code should only be code targeted at the view. Show this, hide that, etc. The service layer should house the business logic for your app. I like having all of it in one place so it's easy to change or tweak a business rule. The repository layer should be relatively dumb - devoid of business logic and only query your data and return your domain objects. By separating the view models from the domain model, you have much more flexibility when it comes to custom validation rules. It also means you don't have to dump every piece of data into your view in hidden fields and push it back and forth between the client and server (or rebuild it on the backend). Your view model will then house only the information relevant to the view - and it can be customized to have bools for view logic or counts or enums so that the view itself isn't cluttered up with complicated logic statements like

<% if (!String.IsNullOrEmpty(Model.SomeObject.SomeProperty) && 
    Model.SomeObject.SomeInt == 3 && ...) { %>

While everything seems spread out and over-layered, it has a purpose for being architected this way. Is it perfect? not really. But I do prefer it to some past designs of calling repositories from the controller and having business logic mixed in the controller, repository, and model.

Model-View-Presenter

In MVP, the Presenter contains the UI business logic for the View. All invocations from the View delegate directly to the Presenter. The Presenter is also decoupled directly from the View and talks to it through an interface. This is to allow mocking of the View in a unit test. One common attribute of MVP is that there has to be a lot of two-way dispatching. For example, when someone clicks the "Save" button, the event handler delegates to the Presenter's "OnSave" method. Once the save is completed, the Presenter will then call back the View through its interface so that the View can display that the save has completed.

MVP tends to be a very natural pattern for achieving separated presentation in WebForms. The reason is that the View is always created first by the ASP.NET runtime. You can find out more about both variants.

Two primary variations

Passive View: The View is as dumb as possible and contains almost zero logic. A Presenter is a middle man that talks to the View and the Model. The View and Model are completely shielded from one another. The Model may raise events, but the Presenter subscribes to them for updating the View. In Passive View there is no direct data binding, instead, the View exposes setter properties that the Presenter uses to set the data. All state is managed in the Presenter and not the View.

Pro: maximum testability surface; clean separation of the View and Model
Con: more work (for example all the setter properties) as you are doing all the data binding yourself.

Supervising Controller: The Presenter handles user gestures. The View binds to the Model directly through data binding. In this case, it's the Presenter's job to pass off the Model to the View so that it can bind to it. The Presenter will also contain logic for gestures like pressing a button, navigation, etc.

Pro: by leveraging data binding the amount of code is reduced.
Con: there's a less testable surface (because of data binding), and there's less encapsulation in the View since it talks directly to the Model.

Model-View-Controller

In the MVC, the Controller is responsible for determining which View to display in response to any action including when the application loads. This differs from MVP where actions route through the View to the Presenter. In MVC, every action in the View correlates with a call to a Controller along with an action. In the web, each action involves a call to a URL on the other side of which there is a Controller who responds. Once that Controller has completed its processing, it will return the correct View. The sequence continues in that manner throughout the life of the application:

    Action in the View
        -> Call to Controller
        -> Controller Logic
        -> Controller returns the View.

One other big difference about MVC is that the View does not directly bind to the Model. The view simply renders and is completely stateless. In implementations of MVC, the View usually will not have any logic in the code behind. This is contrary to MVP where it is absolutely necessary because, if the View does not delegate to the Presenter, it will never get called.

Presentation Model

One other pattern to look at is the Presentation Model pattern. In this pattern, there is no Presenter. Instead, the View binds directly to a Presentation Model. The Presentation Model is a Model crafted specifically for the View. This means this Model can expose properties that one would never put on a domain model as it would be a violation of separation-of-concerns. In this case, the Presentation Model binds to the domain model and may subscribe to events coming from that Model. The View then subscribes to events coming from the Presentation Model and updates itself accordingly. The Presentation Model can expose commands which the view uses for invoking actions. The advantage of this approach is that you can essentially remove the code-behind altogether as the PM completely encapsulates all of the behavior for the view. This pattern is a very strong candidate for use in WPF applications and is also called Model-View-ViewModel.

There is a MSDN article about the Presentation Model and a section in the Composite Application Guidance for WPF (former Prism) about Separated Presentation Patterns

Asp.net-mvc – ASP.NET MVC – Should business logic exist in controllers

Business logic should really be in the model. You should be aiming for fat models, skinny controllers.

For example, instead of having:

public interface IOrderService{
    int CalculateTotal(Order order);
}

I would rather have:

public class Order{
    int CalculateTotal(ITaxService service){...}        
}

This assumes that tax is calculate by an external service, and requires your model to know about interfaces to your external services.

This would make your controller look something like:

public class OrdersController{
    public OrdersController(ITaxService taxService, IOrdersRepository ordersRepository){...}

    public void Show(int id){
        ViewData["OrderTotal"] = ordersRepository.LoadOrder(id).CalculateTotal(taxService);
    }
}

Or something like that.

Best Answer

Related Solutions

What are MVP and MVC and what is the difference

Model-View-Presenter

Two primary variations

Model-View-Controller

Presentation Model

Asp.net-mvc – ASP.NET MVC – Should business logic exist in controllers

Related Topic