To check if a directory exists in a shell script, you can use the following:
if [ -d "$DIRECTORY" ]; then
# Control will enter here if $DIRECTORY exists.
fi
Or to check if a directory doesn't exist:
if [ ! -d "$DIRECTORY" ]; then
# Control will enter here if $DIRECTORY doesn't exist.
fi
However, as Jon Ericson points out, subsequent commands may not work as intended if you do not take into account that a symbolic link to a directory will also pass this check.
E.g. running this:
ln -s "$ACTUAL_DIR" "$SYMLINK"
if [ -d "$SYMLINK" ]; then
rmdir "$SYMLINK"
fi
Will produce the error message:
rmdir: failed to remove `symlink': Not a directory
So symbolic links may have to be treated differently, if subsequent commands expect directories:
if [ -d "$LINK_OR_DIR" ]; then
if [ -L "$LINK_OR_DIR" ]; then
# It is a symlink!
# Symbolic link specific commands go here.
rm "$LINK_OR_DIR"
else
# It's a directory!
# Directory command goes here.
rmdir "$LINK_OR_DIR"
fi
fi
Take particular note of the double-quotes used to wrap the variables. The reason for this is explained by 8jean in another answer.
If the variables contain spaces or other unusual characters it will probably cause the script to fail.
Bash Space-Separated (e.g., --option argument
)
cat >/tmp/demo-space-separated.sh <<'EOF'
#!/bin/bash
POSITIONAL=()
while [[ $# -gt 0 ]]; do
key="$1"
case $key in
-e|--extension)
EXTENSION="$2"
shift # past argument
shift # past value
;;
-s|--searchpath)
SEARCHPATH="$2"
shift # past argument
shift # past value
;;
-l|--lib)
LIBPATH="$2"
shift # past argument
shift # past value
;;
--default)
DEFAULT=YES
shift # past argument
;;
*) # unknown option
POSITIONAL+=("$1") # save it in an array for later
shift # past argument
;;
esac
done
set -- "${POSITIONAL[@]}" # restore positional parameters
echo "FILE EXTENSION = ${EXTENSION}"
echo "SEARCH PATH = ${SEARCHPATH}"
echo "LIBRARY PATH = ${LIBPATH}"
echo "DEFAULT = ${DEFAULT}"
echo "Number files in SEARCH PATH with EXTENSION:" $(ls -1 "${SEARCHPATH}"/*."${EXTENSION}" | wc -l)
if [[ -n $1 ]]; then
echo "Last line of file specified as non-opt/last argument:"
tail -1 "$1"
fi
EOF
chmod +x /tmp/demo-space-separated.sh
/tmp/demo-space-separated.sh -e conf -s /etc -l /usr/lib /etc/hosts
Output from copy-pasting the block above
FILE EXTENSION = conf
SEARCH PATH = /etc
LIBRARY PATH = /usr/lib
DEFAULT =
Number files in SEARCH PATH with EXTENSION: 14
Last line of file specified as non-opt/last argument:
#93.184.216.34 example.com
Usage
demo-space-separated.sh -e conf -s /etc -l /usr/lib /etc/hosts
Bash Equals-Separated (e.g., --option=argument
)
cat >/tmp/demo-equals-separated.sh <<'EOF'
#!/bin/bash
for i in "$@"; do
case $i in
-e=*|--extension=*)
EXTENSION="${i#*=}"
shift # past argument=value
;;
-s=*|--searchpath=*)
SEARCHPATH="${i#*=}"
shift # past argument=value
;;
-l=*|--lib=*)
LIBPATH="${i#*=}"
shift # past argument=value
;;
--default)
DEFAULT=YES
shift # past argument with no value
;;
*)
# unknown option
;;
esac
done
echo "FILE EXTENSION = ${EXTENSION}"
echo "SEARCH PATH = ${SEARCHPATH}"
echo "LIBRARY PATH = ${LIBPATH}"
echo "DEFAULT = ${DEFAULT}"
echo "Number files in SEARCH PATH with EXTENSION:" $(ls -1 "${SEARCHPATH}"/*."${EXTENSION}" | wc -l)
if [[ -n $1 ]]; then
echo "Last line of file specified as non-opt/last argument:"
tail -1 $1
fi
EOF
chmod +x /tmp/demo-equals-separated.sh
/tmp/demo-equals-separated.sh -e=conf -s=/etc -l=/usr/lib /etc/hosts
Output from copy-pasting the block above
FILE EXTENSION = conf
SEARCH PATH = /etc
LIBRARY PATH = /usr/lib
DEFAULT =
Number files in SEARCH PATH with EXTENSION: 14
Last line of file specified as non-opt/last argument:
#93.184.216.34 example.com
Usage
demo-equals-separated.sh -e=conf -s=/etc -l=/usr/lib /etc/hosts
To better understand ${i#*=}
search for "Substring Removal" in this guide. It is functionally equivalent to `sed 's/[^=]*=//' <<< "$i"`
which calls a needless subprocess or `echo "$i" | sed 's/[^=]*=//'`
which calls two needless subprocesses.
Using bash with getopt[s]
getopt(1) limitations (older, relatively-recent getopt
versions):
- can't handle arguments that are empty strings
- can't handle arguments with embedded whitespace
More recent getopt
versions don't have these limitations. For more information, see these docs.
POSIX getopts
Additionally, the POSIX shell and others offer getopts
which doen't have these limitations. I've included a simplistic getopts
example.
cat >/tmp/demo-getopts.sh <<'EOF'
#!/bin/sh
# A POSIX variable
OPTIND=1 # Reset in case getopts has been used previously in the shell.
# Initialize our own variables:
output_file=""
verbose=0
while getopts "h?vf:" opt; do
case "$opt" in
h|\?)
show_help
exit 0
;;
v) verbose=1
;;
f) output_file=$OPTARG
;;
esac
done
shift $((OPTIND-1))
[ "${1:-}" = "--" ] && shift
echo "verbose=$verbose, output_file='$output_file', Leftovers: $@"
EOF
chmod +x /tmp/demo-getopts.sh
/tmp/demo-getopts.sh -vf /etc/hosts foo bar
Output from copy-pasting the block above
verbose=1, output_file='/etc/hosts', Leftovers: foo bar
Usage
demo-getopts.sh -vf /etc/hosts foo bar
The advantages of getopts
are:
- It's more portable, and will work in other shells like
dash
.
- It can handle multiple single options like
-vf filename
in the typical Unix way, automatically.
The disadvantage of getopts
is that it can only handle short options (-h
, not --help
) without additional code.
There is a getopts tutorial which explains what all of the syntax and variables mean. In bash, there is also help getopts
, which might be informative.
Best Answer
It's probably easiest to use
xargs
. In your case:The
-L
flag ensures the input is read properly. From the man page ofxargs
: