To check if a directory exists in a shell script, you can use the following:
if [ -d "$DIRECTORY" ]; then
# Control will enter here if $DIRECTORY exists.
fi
Or to check if a directory doesn't exist:
if [ ! -d "$DIRECTORY" ]; then
# Control will enter here if $DIRECTORY doesn't exist.
fi
However, as Jon Ericson points out, subsequent commands may not work as intended if you do not take into account that a symbolic link to a directory will also pass this check.
E.g. running this:
ln -s "$ACTUAL_DIR" "$SYMLINK"
if [ -d "$SYMLINK" ]; then
rmdir "$SYMLINK"
fi
Will produce the error message:
rmdir: failed to remove `symlink': Not a directory
So symbolic links may have to be treated differently, if subsequent commands expect directories:
if [ -d "$LINK_OR_DIR" ]; then
if [ -L "$LINK_OR_DIR" ]; then
# It is a symlink!
# Symbolic link specific commands go here.
rm "$LINK_OR_DIR"
else
# It's a directory!
# Directory command goes here.
rmdir "$LINK_OR_DIR"
fi
fi
Take particular note of the double-quotes used to wrap the variables. The reason for this is explained by 8jean in another answer.
If the variables contain spaces or other unusual characters it will probably cause the script to fail.
#!/usr/bin/env bash
SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
is a useful one-liner which will give you the full directory name of the script no matter where it is being called from.
It will work as long as the last component of the path used to find the script is not a symlink (directory links are OK). If you also want to resolve any links to the script itself, you need a multi-line solution:
#!/usr/bin/env bash
SOURCE="${BASH_SOURCE[0]}"
while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"
SOURCE="$(readlink "$SOURCE")"
[[ $SOURCE != /* ]] && SOURCE="$DIR/$SOURCE" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
done
DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"
This last one will work with any combination of aliases, source
, bash -c
, symlinks, etc.
Beware: if you cd
to a different directory before running this snippet, the result may be incorrect!
Also, watch out for $CDPATH
gotchas, and stderr output side effects if the user has smartly overridden cd to redirect output to stderr instead (including escape sequences, such as when calling update_terminal_cwd >&2
on Mac). Adding >/dev/null 2>&1
at the end of your cd
command will take care of both possibilities.
To understand how it works, try running this more verbose form:
#!/usr/bin/env bash
SOURCE="${BASH_SOURCE[0]}"
while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
TARGET="$(readlink "$SOURCE")"
if [[ $TARGET == /* ]]; then
echo "SOURCE '$SOURCE' is an absolute symlink to '$TARGET'"
SOURCE="$TARGET"
else
DIR="$( dirname "$SOURCE" )"
echo "SOURCE '$SOURCE' is a relative symlink to '$TARGET' (relative to '$DIR')"
SOURCE="$DIR/$TARGET" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
fi
done
echo "SOURCE is '$SOURCE'"
RDIR="$( dirname "$SOURCE" )"
DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"
if [ "$DIR" != "$RDIR" ]; then
echo "DIR '$RDIR' resolves to '$DIR'"
fi
echo "DIR is '$DIR'"
And it will print something like:
SOURCE './scriptdir.sh' is a relative symlink to 'sym2/scriptdir.sh' (relative to '.')
SOURCE is './sym2/scriptdir.sh'
DIR './sym2' resolves to '/home/ubuntu/dotfiles/fo fo/real/real1/real2'
DIR is '/home/ubuntu/dotfiles/fo fo/real/real1/real2'
Best Answer
Classic technique (escape metacharacters):
I've enclosed the references to
$g
in double quotes; that's good practice, in general. Strictly, the parentheses aren't needed because the precedence of-a
and-o
makes it correct even without them.Note that the
-a
and-o
operators are part of the POSIX specification fortest
, aka[
, mainly for backwards compatibility (since they were a part oftest
in 7th Edition UNIX, for example), but they are explicitly marked as 'obsolescent' by POSIX. Bash (see conditional expressions) seems to preempt the classic and POSIX meanings for-a
and-o
with its own alternative operators that take arguments.With some care, you can use the more modern
[[
operator, but be aware that the versions in Bash and Korn Shell (for example) need not be identical.Example run, using Bash 3.2.57 on Mac OS X:
You don't need to quote the variables in
[[
as you do with[
because it is not a separate command in the same way that[
is.I would have thought so. However, there is another alternative, namely:
Indeed, if you read the 'portable shell' guidelines for the
autoconf
tool or related packages, this notation — using '||
' and '&&
' — is what they recommend. I suppose you could even go so far as:Where the actions are as trivial as echoing, this isn't bad. When the action block to be repeated is multiple lines, the repetition is too painful and one of the earlier versions is preferable — or you need to wrap the actions into a function that is invoked in the different
then
blocks.