C++ – How to convert a command-line argument to int

argument-passingccommand-line-arguments

I need to get an argument and convert it to an int. Here is my code so far:

#include <iostream>


using namespace std;
int main(int argc,int argvx[]) {
    int i=1;
    int answer = 23;
    int temp;

    // decode arguments
    if(argc < 2) {
        printf("You must provide at least one argument\n");
        exit(0);
    }

    // Convert it to an int here

}

Best Answer

Since this answer was somehow accepted and thus will appear at the top, although it's not the best, I've improved it based on the other answers and the comments.

The C way; simplest, but will treat any invalid number as 0:

#include <cstdlib>

int x = atoi(argv[1]);

The C way with input checking:

#include <cstdlib>

errno = 0;
char *endptr;
long int x = strtol(argv[1], &endptr, 10);
if (endptr == argv[1]) {
  std::cerr << "Invalid number: " << argv[1] << '\n';
} else if (*endptr) {
  std::cerr << "Trailing characters after number: " << argv[1] << '\n';
} else if (errno == ERANGE) {
  std::cerr << "Number out of range: " << argv[1] << '\n';
}

The C++ iostreams way with input checking:

#include <sstream>

std::istringstream ss(argv[1]);
int x;
if (!(ss >> x)) {
  std::cerr << "Invalid number: " << argv[1] << '\n';
} else if (!ss.eof()) {
  std::cerr << "Trailing characters after number: " << argv[1] << '\n';
}

Alternative C++ way since C++11:

#include <stdexcept>
#include <string>

std::string arg = argv[1];
try {
  std::size_t pos;
  int x = std::stoi(arg, &pos);
  if (pos < arg.size()) {
    std::cerr << "Trailing characters after number: " << arg << '\n';
  }
} catch (std::invalid_argument const &ex) {
  std::cerr << "Invalid number: " << arg << '\n';
} catch (std::out_of_range const &ex) {
  std::cerr << "Number out of range: " << arg << '\n';
}

All four variants assume that argc >= 2. All accept leading whitespace; check isspace(argv[1][0]) if you don't want that. All except atoi reject trailing whitespace.

Setting a bit

Use the bitwise OR operator (|) to set a bit.

number |= 1UL << n;

That will set the nth bit of number. n should be zero, if you want to set the 1st bit and so on upto n-1, if you want to set the nth bit.

Use 1ULL if number is wider than unsigned long; promotion of 1UL << n doesn't happen until after evaluating 1UL << n where it's undefined behaviour to shift by more than the width of a long. The same applies to all the rest of the examples.

Clearing a bit

Use the bitwise AND operator (&) to clear a bit.

number &= ~(1UL << n);

That will clear the nth bit of number. You must invert the bit string with the bitwise NOT operator (~), then AND it.

Toggling a bit

The XOR operator (^) can be used to toggle a bit.

number ^= 1UL << n;

That will toggle the nth bit of number.

Checking a bit

You didn't ask for this, but I might as well add it.

To check a bit, shift the number n to the right, then bitwise AND it:

bit = (number >> n) & 1U;

That will put the value of the nth bit of number into the variable bit.

Changing the nth bit to x

Setting the nth bit to either 1 or 0 can be achieved with the following on a 2's complement C++ implementation:

number ^= (-x ^ number) & (1UL << n);

Bit n will be set if x is 1, and cleared if x is 0. If x has some other value, you get garbage. x = !!x will booleanize it to 0 or 1.

To make this independent of 2's complement negation behaviour (where -1 has all bits set, unlike on a 1's complement or sign/magnitude C++ implementation), use unsigned negation.

number ^= (-(unsigned long)x ^ number) & (1UL << n);

unsigned long newbit = !!x;    // Also booleanize to force 0 or 1
number ^= (-newbit ^ number) & (1UL << n);

It's generally a good idea to use unsigned types for portable bit manipulation.

number = (number & ~(1UL << n)) | (x << n);

(number & ~(1UL << n)) will clear the nth bit and (x << n) will set the nth bit to x.

It's also generally a good idea to not to copy/paste code in general and so many people use preprocessor macros (like the community wiki answer further down) or some sort of encapsulation.

C++ – How to iterate over the words of a string

I use this to split string by a delimiter. The first puts the results in a pre-constructed vector, the second returns a new vector.

#include <string>
#include <sstream>
#include <vector>
#include <iterator>

template <typename Out>
void split(const std::string &s, char delim, Out result) {
    std::istringstream iss(s);
    std::string item;
    while (std::getline(iss, item, delim)) {
        *result++ = item;
    }
}

std::vector<std::string> split(const std::string &s, char delim) {
    std::vector<std::string> elems;
    split(s, delim, std::back_inserter(elems));
    return elems;
}

Note that this solution does not skip empty tokens, so the following will find 4 items, one of which is empty:

std::vector<std::string> x = split("one:two::three", ':');