Setting a bit
Use the bitwise OR operator (|
) to set a bit.
number |= 1UL << n;
That will set the n
th bit of number
. n
should be zero, if you want to set the 1
st bit and so on upto n-1
, if you want to set the n
th bit.
Use 1ULL
if number
is wider than unsigned long
; promotion of 1UL << n
doesn't happen until after evaluating 1UL << n
where it's undefined behaviour to shift by more than the width of a long
. The same applies to all the rest of the examples.
Clearing a bit
Use the bitwise AND operator (&
) to clear a bit.
number &= ~(1UL << n);
That will clear the n
th bit of number
. You must invert the bit string with the bitwise NOT operator (~
), then AND it.
Toggling a bit
The XOR operator (^
) can be used to toggle a bit.
number ^= 1UL << n;
That will toggle the n
th bit of number
.
Checking a bit
You didn't ask for this, but I might as well add it.
To check a bit, shift the number n to the right, then bitwise AND it:
bit = (number >> n) & 1U;
That will put the value of the n
th bit of number
into the variable bit
.
Changing the nth bit to x
Setting the n
th bit to either 1
or 0
can be achieved with the following on a 2's complement C++ implementation:
number ^= (-x ^ number) & (1UL << n);
Bit n
will be set if x
is 1
, and cleared if x
is 0
. If x
has some other value, you get garbage. x = !!x
will booleanize it to 0 or 1.
To make this independent of 2's complement negation behaviour (where -1
has all bits set, unlike on a 1's complement or sign/magnitude C++ implementation), use unsigned negation.
number ^= (-(unsigned long)x ^ number) & (1UL << n);
or
unsigned long newbit = !!x; // Also booleanize to force 0 or 1
number ^= (-newbit ^ number) & (1UL << n);
It's generally a good idea to use unsigned types for portable bit manipulation.
or
number = (number & ~(1UL << n)) | (x << n);
(number & ~(1UL << n))
will clear the n
th bit and (x << n)
will set the n
th bit to x
.
It's also generally a good idea to not to copy/paste code in general and so many people use preprocessor macros (like the community wiki answer further down) or some sort of encapsulation.
I use this to split string by a delimiter. The first puts the results in a pre-constructed vector, the second returns a new vector.
#include <string>
#include <sstream>
#include <vector>
#include <iterator>
template <typename Out>
void split(const std::string &s, char delim, Out result) {
std::istringstream iss(s);
std::string item;
while (std::getline(iss, item, delim)) {
*result++ = item;
}
}
std::vector<std::string> split(const std::string &s, char delim) {
std::vector<std::string> elems;
split(s, delim, std::back_inserter(elems));
return elems;
}
Note that this solution does not skip empty tokens, so the following will find 4 items, one of which is empty:
std::vector<std::string> x = split("one:two::three", ':');
Best Answer
In VS, right click your project, chose "Properties".
Click the C/C++ node. Set Debug Information Format to C7 compatible (/Z7) or Program Database (/Zi).
Expand Linker and click the General node. Set Enable Incremental Linking to No (/INCREMENTAL:NO).
Select the Debugging node. Set Generate Debug Info to Yes (/DEBUG).
Select the Optimization node. Set References to Yes (/OPT:REF).
That's ripped directly from Microsoft's documentation:
I do this all of the time and pretty much never debug in debug mode anymore. As you know, many errors that occur in a release build may not occur in a debug build (almost certainly the errors that arise from invoking UB).
Also, I work on a project which uses a ton of image processing and performs a lot of compression/decompression of large images. Using a slow debug build is simply impractical.