Setting a bit
Use the bitwise OR operator (|
) to set a bit.
number |= 1UL << n;
That will set the n
th bit of number
. n
should be zero, if you want to set the 1
st bit and so on upto n-1
, if you want to set the n
th bit.
Use 1ULL
if number
is wider than unsigned long
; promotion of 1UL << n
doesn't happen until after evaluating 1UL << n
where it's undefined behaviour to shift by more than the width of a long
. The same applies to all the rest of the examples.
Clearing a bit
Use the bitwise AND operator (&
) to clear a bit.
number &= ~(1UL << n);
That will clear the n
th bit of number
. You must invert the bit string with the bitwise NOT operator (~
), then AND it.
Toggling a bit
The XOR operator (^
) can be used to toggle a bit.
number ^= 1UL << n;
That will toggle the n
th bit of number
.
Checking a bit
You didn't ask for this, but I might as well add it.
To check a bit, shift the number n to the right, then bitwise AND it:
bit = (number >> n) & 1U;
That will put the value of the n
th bit of number
into the variable bit
.
Changing the nth bit to x
Setting the n
th bit to either 1
or 0
can be achieved with the following on a 2's complement C++ implementation:
number ^= (-x ^ number) & (1UL << n);
Bit n
will be set if x
is 1
, and cleared if x
is 0
. If x
has some other value, you get garbage. x = !!x
will booleanize it to 0 or 1.
To make this independent of 2's complement negation behaviour (where -1
has all bits set, unlike on a 1's complement or sign/magnitude C++ implementation), use unsigned negation.
number ^= (-(unsigned long)x ^ number) & (1UL << n);
or
unsigned long newbit = !!x; // Also booleanize to force 0 or 1
number ^= (-newbit ^ number) & (1UL << n);
It's generally a good idea to use unsigned types for portable bit manipulation.
or
number = (number & ~(1UL << n)) | (x << n);
(number & ~(1UL << n))
will clear the n
th bit and (x << n)
will set the n
th bit to x
.
It's also generally a good idea to not to copy/paste code in general and so many people use preprocessor macros (like the community wiki answer further down) or some sort of encapsulation.
Unless that value is 0 (in which case you can omit some part of the initializer
and the corresponding elements will be initialized to 0), there's no easy way.
Don't overlook the obvious solution, though:
int myArray[10] = { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 };
Elements with missing values will be initialized to 0:
int myArray[10] = { 1, 2 }; // initialize to 1,2,0,0,0...
So this will initialize all elements to 0:
int myArray[10] = { 0 }; // all elements 0
In C++, an empty initialization list will also initialize every element to 0.
This is not allowed with C:
int myArray[10] = {}; // all elements 0 in C++
Remember that objects with static storage duration will initialize to 0 if no
initializer is specified:
static int myArray[10]; // all elements 0
And that "0" doesn't necessarily mean "all-bits-zero", so using the above is
better and more portable than memset(). (Floating point values will be
initialized to +0, pointers to null value, etc.)
Best Answer
The class declaration should be in the header file (Or in the source file if not shared).
File: foo.h
But the initialization should be in source file.
File: foo.cpp
If the initialization is in the header file then each file that includes the header file will have a definition of the static member. Thus during the link phase you will get linker errors as the code to initialize the variable will be defined in multiple source files. The initialisation of the
static int i
must be done outside of any function.Note: Matt Curtis: points out that C++ allows the simplification of the above if the static member variable is of const int type (e.g.
int
,bool
,char
). You can then declare and initialize the member variable directly inside the class declaration in the header file: