C++ – How to make a single static library from multiple static libraries

cvisual-studio-2005

We recently converted a C++ project from Visual Studio 6 to Visual Studio 8. Everything went well until we reached the compilation of a project who put all the static libraries inside one big static library. By default after the conversion between the two version of projects the project didn't do anything (no big static library was created, it only said that the project was up-to-date).

We found a working solution by adding a dummy (empty) file to the project (it had no other files before, in the Visual Studio 6 solution). Everything went well and we managed to compile the project with the new development environment (Visual Studio 8).

My question is: Is there any other way to do this, without dummy files added to the project?

Thanks in advance for your responses

Best Answer

You can use the method described in the answer by nobugz also with multiple configurations and different directories for debug and release input libs. Just add all input libs, debug and release, and use "exclude from build". In the debug configuration exclude all release input libs from the build, in the release configuration exclude all debug input libs.

Setting a bit

Use the bitwise OR operator (|) to set a bit.

number |= 1UL << n;

That will set the nth bit of number. n should be zero, if you want to set the 1st bit and so on upto n-1, if you want to set the nth bit.

Use 1ULL if number is wider than unsigned long; promotion of 1UL << n doesn't happen until after evaluating 1UL << n where it's undefined behaviour to shift by more than the width of a long. The same applies to all the rest of the examples.

Clearing a bit

Use the bitwise AND operator (&) to clear a bit.

number &= ~(1UL << n);

That will clear the nth bit of number. You must invert the bit string with the bitwise NOT operator (~), then AND it.

Toggling a bit

The XOR operator (^) can be used to toggle a bit.

number ^= 1UL << n;

That will toggle the nth bit of number.

Checking a bit

You didn't ask for this, but I might as well add it.

To check a bit, shift the number n to the right, then bitwise AND it:

bit = (number >> n) & 1U;

That will put the value of the nth bit of number into the variable bit.

Changing the nth bit to x

Setting the nth bit to either 1 or 0 can be achieved with the following on a 2's complement C++ implementation:

number ^= (-x ^ number) & (1UL << n);

Bit n will be set if x is 1, and cleared if x is 0. If x has some other value, you get garbage. x = !!x will booleanize it to 0 or 1.

To make this independent of 2's complement negation behaviour (where -1 has all bits set, unlike on a 1's complement or sign/magnitude C++ implementation), use unsigned negation.

number ^= (-(unsigned long)x ^ number) & (1UL << n);

unsigned long newbit = !!x;    // Also booleanize to force 0 or 1
number ^= (-newbit ^ number) & (1UL << n);

It's generally a good idea to use unsigned types for portable bit manipulation.

number = (number & ~(1UL << n)) | (x << n);

(number & ~(1UL << n)) will clear the nth bit and (x << n) will set the nth bit to x.

It's also generally a good idea to not to copy/paste code in general and so many people use preprocessor macros (like the community wiki answer further down) or some sort of encapsulation.

C++ – How to build an import library (.lib) AND a DLL in Visual C++

Does your DLL project have any actual exports? If there are no exports, the linker will not generate an import library .lib file.

In the non-Express version of VS, the import libray name is specfied in the project settings here:

Configuration Properties/Linker/Advanced/Import Library

I assume it's the same in Express (if it even provides the ability to configure the name).