Setting a bit
Use the bitwise OR operator (|
) to set a bit.
number |= 1UL << n;
That will set the n
th bit of number
. n
should be zero, if you want to set the 1
st bit and so on upto n-1
, if you want to set the n
th bit.
Use 1ULL
if number
is wider than unsigned long
; promotion of 1UL << n
doesn't happen until after evaluating 1UL << n
where it's undefined behaviour to shift by more than the width of a long
. The same applies to all the rest of the examples.
Clearing a bit
Use the bitwise AND operator (&
) to clear a bit.
number &= ~(1UL << n);
That will clear the n
th bit of number
. You must invert the bit string with the bitwise NOT operator (~
), then AND it.
Toggling a bit
The XOR operator (^
) can be used to toggle a bit.
number ^= 1UL << n;
That will toggle the n
th bit of number
.
Checking a bit
You didn't ask for this, but I might as well add it.
To check a bit, shift the number n to the right, then bitwise AND it:
bit = (number >> n) & 1U;
That will put the value of the n
th bit of number
into the variable bit
.
Changing the nth bit to x
Setting the n
th bit to either 1
or 0
can be achieved with the following on a 2's complement C++ implementation:
number ^= (-x ^ number) & (1UL << n);
Bit n
will be set if x
is 1
, and cleared if x
is 0
. If x
has some other value, you get garbage. x = !!x
will booleanize it to 0 or 1.
To make this independent of 2's complement negation behaviour (where -1
has all bits set, unlike on a 1's complement or sign/magnitude C++ implementation), use unsigned negation.
number ^= (-(unsigned long)x ^ number) & (1UL << n);
or
unsigned long newbit = !!x; // Also booleanize to force 0 or 1
number ^= (-newbit ^ number) & (1UL << n);
It's generally a good idea to use unsigned types for portable bit manipulation.
or
number = (number & ~(1UL << n)) | (x << n);
(number & ~(1UL << n))
will clear the n
th bit and (x << n)
will set the n
th bit to x
.
It's also generally a good idea to not to copy/paste code in general and so many people use preprocessor macros (like the community wiki answer further down) or some sort of encapsulation.
I use this to split string by a delimiter. The first puts the results in a pre-constructed vector, the second returns a new vector.
#include <string>
#include <sstream>
#include <vector>
#include <iterator>
template <typename Out>
void split(const std::string &s, char delim, Out result) {
std::istringstream iss(s);
std::string item;
while (std::getline(iss, item, delim)) {
*result++ = item;
}
}
std::vector<std::string> split(const std::string &s, char delim) {
std::vector<std::string> elems;
split(s, delim, std::back_inserter(elems));
return elems;
}
Note that this solution does not skip empty tokens, so the following will find 4 items, one of which is empty:
std::vector<std::string> x = split("one:two::three", ':');
Best Answer
Update
The question has been clarified:
In that case, the solution is simply:
Done. It throws if the cast doesn't succeed.
Casting
shared_ptr
For
shared_ptr
there isstd::dynamic_pointer_cast<>
(http://en.cppreference.com/w/cpp/memory/shared_ptr/pointer_cast)Casting
unique_ptr
The simplest way would seem:
As the commenter rightfully points out, this may leak the object if the conversion failed. That's not very helpful.
A reason why the
dynamic_unique_ptr_cast<>
doesn't exist might be that theunique_ptr
type doesn't erase the deleter. It could be hard/impossible to choose an appropriate delete for the target pointer type.However, for simple cases, you could use something like this: