Setting a bit
Use the bitwise OR operator (|
) to set a bit.
number |= 1UL << n;
That will set the n
th bit of number
. n
should be zero, if you want to set the 1
st bit and so on upto n-1
, if you want to set the n
th bit.
Use 1ULL
if number
is wider than unsigned long
; promotion of 1UL << n
doesn't happen until after evaluating 1UL << n
where it's undefined behaviour to shift by more than the width of a long
. The same applies to all the rest of the examples.
Clearing a bit
Use the bitwise AND operator (&
) to clear a bit.
number &= ~(1UL << n);
That will clear the n
th bit of number
. You must invert the bit string with the bitwise NOT operator (~
), then AND it.
Toggling a bit
The XOR operator (^
) can be used to toggle a bit.
number ^= 1UL << n;
That will toggle the n
th bit of number
.
Checking a bit
You didn't ask for this, but I might as well add it.
To check a bit, shift the number n to the right, then bitwise AND it:
bit = (number >> n) & 1U;
That will put the value of the n
th bit of number
into the variable bit
.
Changing the nth bit to x
Setting the n
th bit to either 1
or 0
can be achieved with the following on a 2's complement C++ implementation:
number ^= (-x ^ number) & (1UL << n);
Bit n
will be set if x
is 1
, and cleared if x
is 0
. If x
has some other value, you get garbage. x = !!x
will booleanize it to 0 or 1.
To make this independent of 2's complement negation behaviour (where -1
has all bits set, unlike on a 1's complement or sign/magnitude C++ implementation), use unsigned negation.
number ^= (-(unsigned long)x ^ number) & (1UL << n);
or
unsigned long newbit = !!x; // Also booleanize to force 0 or 1
number ^= (-newbit ^ number) & (1UL << n);
It's generally a good idea to use unsigned types for portable bit manipulation.
or
number = (number & ~(1UL << n)) | (x << n);
(number & ~(1UL << n))
will clear the n
th bit and (x << n)
will set the n
th bit to x
.
It's also generally a good idea to not to copy/paste code in general and so many people use preprocessor macros (like the community wiki answer further down) or some sort of encapsulation.
Best Answer
Right, after months of putting this off I've finally sat down and done it. I'll probably make a more detailed post on my blog with pretty pictures but here is a trimmed down SO version which will hopefully be enough for you (and everyone else) to get going with.
Prerequisites
Remove MinGW, MSYS and CMake if you have them and can afford to lose them (we will reinstall MinGW (obv.) and MSYS but not CMake as it doesn't appear to be needed.)
Installation
MinGW-W64 C compiler and MSYS
Setup
And that should be it!
I should note that I am using the system to compile a library file to be use via JNI so have some additional steps for that which I missed out as they weren't needed here. However I made a quick 'Hello World' program and it compiled and ran nicely.
Happy coding!