I have created a small application with step by step description to get current location's GPS coordinates.
Complete example source code is in Get Current Location coordinates , City name - in Android.
See how it works:
All we need to do is add this permission in the manifest file:
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
And create a LocationManager instance like this:
LocationManager locationManager = (LocationManager)
getSystemService(Context.LOCATION_SERVICE);
Check if GPS is enabled or not.
And then implement LocationListener and get coordinates:
LocationListener locationListener = new MyLocationListener();
locationManager.requestLocationUpdates(
LocationManager.GPS_PROVIDER, 5000, 10, locationListener);
Here is the sample code to do so
/*---------- Listener class to get coordinates ------------- */
private class MyLocationListener implements LocationListener {
@Override
public void onLocationChanged(Location loc) {
editLocation.setText("");
pb.setVisibility(View.INVISIBLE);
Toast.makeText(
getBaseContext(),
"Location changed: Lat: " + loc.getLatitude() + " Lng: "
+ loc.getLongitude(), Toast.LENGTH_SHORT).show();
String longitude = "Longitude: " + loc.getLongitude();
Log.v(TAG, longitude);
String latitude = "Latitude: " + loc.getLatitude();
Log.v(TAG, latitude);
/*------- To get city name from coordinates -------- */
String cityName = null;
Geocoder gcd = new Geocoder(getBaseContext(), Locale.getDefault());
List<Address> addresses;
try {
addresses = gcd.getFromLocation(loc.getLatitude(),
loc.getLongitude(), 1);
if (addresses.size() > 0) {
System.out.println(addresses.get(0).getLocality());
cityName = addresses.get(0).getLocality();
}
}
catch (IOException e) {
e.printStackTrace();
}
String s = longitude + "\n" + latitude + "\n\nMy Current City is: "
+ cityName;
editLocation.setText(s);
}
@Override
public void onProviderDisabled(String provider) {}
@Override
public void onProviderEnabled(String provider) {}
@Override
public void onStatusChanged(String provider, int status, Bundle extras) {}
}
I wrote this a long time ago (from years 1985-1992, with just a few tweaks since then), and just copy and paste the bits needed into each project.
You must call cfmakeraw
on a tty
obtained from tcgetattr
. You cannot zero-out a struct termios
, configure it, and then set the tty
with tcsetattr
. If you use the zero-out method, then you will experience unexplained intermittent failures, especially on the BSDs and OS X. "Unexplained intermittent failures" include hanging in read(3)
.
#include <errno.h>
#include <fcntl.h>
#include <string.h>
#include <termios.h>
#include <unistd.h>
int
set_interface_attribs (int fd, int speed, int parity)
{
struct termios tty;
if (tcgetattr (fd, &tty) != 0)
{
error_message ("error %d from tcgetattr", errno);
return -1;
}
cfsetospeed (&tty, speed);
cfsetispeed (&tty, speed);
tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8; // 8-bit chars
// disable IGNBRK for mismatched speed tests; otherwise receive break
// as \000 chars
tty.c_iflag &= ~IGNBRK; // disable break processing
tty.c_lflag = 0; // no signaling chars, no echo,
// no canonical processing
tty.c_oflag = 0; // no remapping, no delays
tty.c_cc[VMIN] = 0; // read doesn't block
tty.c_cc[VTIME] = 5; // 0.5 seconds read timeout
tty.c_iflag &= ~(IXON | IXOFF | IXANY); // shut off xon/xoff ctrl
tty.c_cflag |= (CLOCAL | CREAD);// ignore modem controls,
// enable reading
tty.c_cflag &= ~(PARENB | PARODD); // shut off parity
tty.c_cflag |= parity;
tty.c_cflag &= ~CSTOPB;
tty.c_cflag &= ~CRTSCTS;
if (tcsetattr (fd, TCSANOW, &tty) != 0)
{
error_message ("error %d from tcsetattr", errno);
return -1;
}
return 0;
}
void
set_blocking (int fd, int should_block)
{
struct termios tty;
memset (&tty, 0, sizeof tty);
if (tcgetattr (fd, &tty) != 0)
{
error_message ("error %d from tggetattr", errno);
return;
}
tty.c_cc[VMIN] = should_block ? 1 : 0;
tty.c_cc[VTIME] = 5; // 0.5 seconds read timeout
if (tcsetattr (fd, TCSANOW, &tty) != 0)
error_message ("error %d setting term attributes", errno);
}
...
char *portname = "/dev/ttyUSB1"
...
int fd = open (portname, O_RDWR | O_NOCTTY | O_SYNC);
if (fd < 0)
{
error_message ("error %d opening %s: %s", errno, portname, strerror (errno));
return;
}
set_interface_attribs (fd, B115200, 0); // set speed to 115,200 bps, 8n1 (no parity)
set_blocking (fd, 0); // set no blocking
write (fd, "hello!\n", 7); // send 7 character greeting
usleep ((7 + 25) * 100); // sleep enough to transmit the 7 plus
// receive 25: approx 100 uS per char transmit
char buf [100];
int n = read (fd, buf, sizeof buf); // read up to 100 characters if ready to read
The values for speed are B115200
, B230400
, B9600
, B19200
, B38400
, B57600
, B1200
, B2400
, B4800
, etc. The values for parity are 0
(meaning no parity), PARENB|PARODD
(enable parity and use odd), PARENB
(enable parity and use even), PARENB|PARODD|CMSPAR
(mark parity), and PARENB|CMSPAR
(space parity).
"Blocking" sets whether a read()
on the port waits for the specified number of characters to arrive. Setting no blocking means that a read()
returns however many characters are available without waiting for more, up to the buffer limit.
Addendum:
CMSPAR
is needed only for choosing mark and space parity, which is uncommon. For most applications, it can be omitted. My header file /usr/include/bits/termios.h
enables definition of CMSPAR
only if the preprocessor symbol __USE_MISC
is defined. That definition occurs (in features.h
) with
#if defined _BSD_SOURCE || defined _SVID_SOURCE
#define __USE_MISC 1
#endif
The introductory comments of <features.h>
says:
/* These are defined by the user (or the compiler)
to specify the desired environment:
...
_BSD_SOURCE ISO C, POSIX, and 4.3BSD things.
_SVID_SOURCE ISO C, POSIX, and SVID things.
...
*/
Best Answer
I have sucessfully used the SerialPort class in .Net 2 also with gps on a virtual comport. It seems your virtual comport driver is slightly off. If you can't locate a newer driver I would suggest you call the WinAPI functions for reading the serial port.
Take a look at this code for instance: http://www.codeproject.com/KB/system/SerialPortComm.aspx