C++ – Why was pair range access removed from C++11

tl;dr: Because of different default settings in C++ requiring more system calls.

By default, cin is synchronized with stdio, which causes it to avoid any input buffering. If you add this to the top of your main, you should see much better performance:

std::ios_base::sync_with_stdio(false);

Normally, when an input stream is buffered, instead of reading one character at a time, the stream will be read in larger chunks. This reduces the number of system calls, which are typically relatively expensive. However, since the FILE* based stdio and iostreams often have separate implementations and therefore separate buffers, this could lead to a problem if both were used together. For example:

int myvalue1;
cin >> myvalue1;
int myvalue2;
scanf("%d",&myvalue2);

If more input was read by cin than it actually needed, then the second integer value wouldn't be available for the scanf function, which has its own independent buffer. This would lead to unexpected results.

To avoid this, by default, streams are synchronized with stdio. One common way to achieve this is to have cin read each character one at a time as needed using stdio functions. Unfortunately, this introduces a lot of overhead. For small amounts of input, this isn't a big problem, but when you are reading millions of lines, the performance penalty is significant.

Fortunately, the library designers decided that you should also be able to disable this feature to get improved performance if you knew what you were doing, so they provided the sync_with_stdio method.

There are several approaches, each with their own pros and cons. Below three approaches with a cost-benefit analysis.

ADL through custom non-member begin() / end()

The first alternative provides non-member begin() and end() function templates inside a legacy namespace to retrofit the required functionality onto any class or class template that can provide it, but has e.g. the wrong naming conventions. Calling code can then rely on ADL to find these new functions. Example code (based on comments by @Xeo):

// LegacyContainerBeginEnd.h
namespace legacy {

// retro-fitting begin() / end() interface on legacy 
// Container class template with incompatible names         
template<class C> 
auto begin(Container& c) -> decltype(c.legacy_begin())
{ 
    return c.legacy_begin(); 
}

// similarly for begin() taking const&, cbegin(), end(), cend(), etc.

} // namespace legacy

// print.h
template<class C>
void print(C const& c)
{
    // bring into scope to fall back on for types without their own namespace non-member begin()/end()
    using std::begin;
    using std::end;

    // works for Standard Containers, C-style arrays and legacy Containers
    std::copy(begin(c), end(c), std::ostream_iterator<decltype(*begin(c))>(std::cout, " ")); std::cout << "\n";

    // alternative: also works for Standard Containers, C-style arrays and legacy Containers
    for (auto elem: c) std::cout << elem << " "; std::cout << "\n";
}

Pros: consistent and terse calling convention that works completely generically

• works for any Standard Container and user-types that define member .begin() and .end()
• works for C-style arrays
• can be retrofitted to work (also for range-for loops!) for any class template legacy::Container<T> that does not have member .begin() and end() without requiring source code modifications

Cons: requires using-declarations in many places

• std::begin and std::end are required to have been brought into every explicit calling scope as fall back options for C-style arrays (potential pitfall for template headers and general nuisance)

ADL through custom non-member adl_begin() and adl_end()

A second alternative is to encapsulate the using-declarations of the previous solution into a separate adl namespace by providing non-member function templates adl_begin() and adl_end(), which can then also be found through ADL. Example code (based on comments by @Yakk):

// LegacyContainerBeginEnd.h 
// as before...

// ADLBeginEnd.h
namespace adl {

using std::begin; // <-- here, because otherwise decltype() will not find it 

template<class C> 
auto adl_begin(C && c) -> decltype(begin(std::forward<C>(c)))
{ 
    // using std::begin; // in C++14 this might work because decltype() is no longer needed
    return begin(std::forward<C>(c)); // try to find non-member, fall back on std::
}

// similary for cbegin(), end(), cend(), etc.

} // namespace adl

using adl::adl_begin; // will be visible in any compilation unit that includes this header

// print.h
# include "ADLBeginEnd.h" // brings adl_begin() and adl_end() into scope

template<class C>
void print(C const& c)
{
    // works for Standard Containers, C-style arrays and legacy Containers
    std::copy(adl_begin(c), adl_end(c), std::ostream_iterator<decltype(*adl_begin(c))>(std::cout, " ")); std::cout << "\n";

    // alternative: also works for Standard Containers, C-style arrays and legacy Containers
    // does not need adl_begin() / adl_end(), but continues to work
    for (auto elem: c) std::cout << elem << " "; std::cout << "\n";
}

Pros: consistent calling convention that works completely generically

• the same pros as for @Xeo's suggestion +
• the repeated using-declarations have been encapsulated (DRY)

Cons: a little verbose

• adl_begin() / adl_end() is not as terse as begin() / end()
• it is perhaps also not as idiomatic (although it is explicit)
• pending C++14 return type deduction, will also pollute namespace with std::begin / std::end

NOTE: Not sure if this really improves upon the previous approach.

Explicitly qualifying std::begin() or std::end() everywhere

Once the verbosity of begin() / end() has been given up anyway, why not go back to the qualified calls of std::begin() / std::end()? Example code:

// LegacyIntContainerBeginEnd.h
namespace std {

// retro-fitting begin() / end() interface on legacy IntContainer class 
// with incompatible names         
template<> 
auto begin(legacy::IntContainer& c) -> decltype(c.legacy_begin())
{ 
    return c.legacy_begin(); 
}

// similary for begin() taking const&, cbegin(), end(), cend(), etc.

} // namespace std

// LegacyContainer.h
namespace legacy {

template<class T>
class Container
{
public:
    // YES, DOCUMENT REALLY WELL THAT THE EXISTING CODE IS BEING MODIFIED
    auto begin() -> decltype(legacy_begin()) { return legacy_begin(); }
    auto end() -> decltype(legacy_end()) { return legacy_end(); }

    // rest of existing interface
};

} // namespace legacy

// print.h
template<class C>
void print(C const& c)
{
    // works for Standard Containers, C-style arrays as well as 
    // legacy::IntContainer and legacy::Container<T>
    std::copy(std::begin(c), std::end(c), std::ostream_iterator<decltype(*std::begin(c))>(std::cout, " ")); std::cout << "\n";

    // alternative: also works for Standard Containers, C-style arrays and
    // legacy::IntContainer and legacy::Container<T>
    for (auto elem: c) std::cout << elem << " "; std::cout << "\n";
}

Pros: consistent calling convention that works almost generically

• works for any Standard Container and user-types that define member .begin() and .end()
• works for C-style arrays

Cons: a little verbose and retrofitting is not generic and a maintainence problem

• std::begin() / std::end() is a little more verbose than begin() / end()
• can only be retrofitted to work (also for range-for loops!) for any class LegacyContainer that does not have member .begin() and end() (and for which there is no source code!) by providing explicit specializations of the non-member function templates begin() and end() in namespace std
• can only be retrofitted onto class templates LegacyContainer<T> by directly adding member functions begin() / end() inside the source code of LegacyContainer<T> (which for templates is available). The namespace std trick does not work here because function templates cannot be partially specialized. 

What to use?

The ADL approach through non-member begin() / end() in a a container's own namespace is the idiomatic C++11 approach, especially for generic functions that require retrofitting on legacy classes and class templates. It is the same idiom as for user-providing non-member swap() functions.

For code that only uses Standard Containers or C-style arrays, std::begin() and std::end() could be called everywhere without introducing using-declarations, at the expense of more verbose calls. This approach can even be retrofitted but it requires fiddling with namespace std (for class types) or in-place source modifcations (for class templates). It can be done, but is not worth the maintainence trouble.

In non-generic code, where the container in question is known at coding-time, one could even rely on ADL for Standard Containers only, and explicitly qualify std::begin / std::end for C-style arrays. It loses some calling consistency but saves on using-declarations.