In practice, the difference is in the location where the preprocessor searches for the included file.
For #include <filename> the preprocessor searches in an implementation dependent manner, normally in search directories pre-designated by the compiler/IDE. This method is normally used to include standard library header files.
For #include "filename" the preprocessor searches first in the same directory as the file containing the directive, and then follows the search path used for the #include <filename> form. This method is normally used to include programmer-defined header files.
A more complete description is available in the GCC documentation on search paths.
Setting a bit
Use the bitwise OR operator (|) to set a bit.
number |= 1UL << n;
That will set the nth bit of number. n should be zero, if you want to set the 1st bit and so on upto n-1, if you want to set the nth bit.
Use 1ULL if number is wider than unsigned long; promotion of 1UL << n doesn't happen until after evaluating 1UL << n where it's undefined behaviour to shift by more than the width of a long. The same applies to all the rest of the examples.
Clearing a bit
Use the bitwise AND operator (&) to clear a bit.
number &= ~(1UL << n);
That will clear the nth bit of number. You must invert the bit string with the bitwise NOT operator (~), then AND it.
Toggling a bit
The XOR operator (^) can be used to toggle a bit.
number ^= 1UL << n;
That will toggle the nth bit of number.
Checking a bit
You didn't ask for this, but I might as well add it.
To check a bit, shift the number n to the right, then bitwise AND it:
bit = (number >> n) & 1U;
That will put the value of the nth bit of number into the variable bit.
Changing the nth bit to x
Setting the nth bit to either 1 or 0 can be achieved with the following on a 2's complement C++ implementation:
number ^= (-x ^ number) & (1UL << n);
Bit n will be set if x is 1, and cleared if x is 0. If x has some other value, you get garbage. x = !!x will booleanize it to 0 or 1.
To make this independent of 2's complement negation behaviour (where -1 has all bits set, unlike on a 1's complement or sign/magnitude C++ implementation), use unsigned negation.
number ^= (-(unsigned long)x ^ number) & (1UL << n);
or
unsigned long newbit = !!x; // Also booleanize to force 0 or 1
number ^= (-newbit ^ number) & (1UL << n);
It's generally a good idea to use unsigned types for portable bit manipulation.
or
number = (number & ~(1UL << n)) | (x << n);
(number & ~(1UL << n)) will clear the nth bit and (x << n) will set the nth bit to x.
It's also generally a good idea to not to copy/paste code in general and so many people use preprocessor macros (like the community wiki answer further down) or some sort of encapsulation.
Best Answer
Assuming that this is inside your winproc:
Shift and click and alt is a bit trickier you have to use a different way
Why like that? You will notice from WM_LBUTTONDOWN page that for each signal sent you have parameters given. One of them is the wparam. It can have different values depending on whether some special keys are pressed or not
And since the wparam of the WM_LBUTTONDOWN signal does not contain information about the alt button you would have to utilize the GetKeyState function which returns a high order bit value of 1 if the key is down and anything else if it's not.