Eclipse – Help installing Eclipse svn connector on Mac OS X

Create a users file (i.e. users.txt) for mapping SVN users to Git:

user1 = First Last Name <email@address.com>
user2 = First Last Name <email@address.com>
...

You can use this one-liner to build a template from your existing SVN repository:

svn log -q | awk -F '|' '/^r/ {gsub(/ /, "", $2); sub(" $", "", $2); print $2" = "$2" <"$2">"}' | sort -u > users.txt

SVN will stop if it finds a missing SVN user, not in the file. But after that, you can update the file and pick up where you left off.

Now pull the SVN data from the repository:

git svn clone --stdlayout --no-metadata --authors-file=users.txt svn://hostname/path dest_dir-tmp

This command will create a new Git repository in dest_dir-tmp and start pulling the SVN repository. Note that the "--stdlayout" flag implies you have the common "trunk/, branches/, tags/" SVN layout. If your layout differs, become familiar with --tags, --branches, --trunk options (in general git svn help).

All common protocols are allowed: svn://, http://, https://. The URL should target the base repository, something like http://svn.mycompany.com/myrepo/repository. The URL string must not include /trunk, /tag or /branches.

Note that after executing this command it very often looks like the operation is "hanging/frozen", and it's quite normal that it can be stuck for a long time after initializing the new repository. Eventually, you will then see log messages which indicate that it's migrating.

Also note that if you omit the --no-metadata flag, Git will append information about the corresponding SVN revision to the commit message (i.e. git-svn-id: svn://svn.mycompany.com/myrepo/<branchname/trunk>@<RevisionNumber> <Repository UUID>)

If a user name is not found, update your users.txt file then:

cd dest_dir-tmp
git svn fetch

You might have to repeat that last command several times, if you have a large project until all of the Subversion commits have been fetched:

git svn fetch

When completed, Git will checkout the SVN trunk into a new branch. Any other branches are set up as remotes. You can view the other SVN branches with:

git branch -r

If you want to keep other remote branches in your repository, you want to create a local branch for each one manually. (Skip trunk/master.) If you don't do this, the branches won't get cloned in the final step.

git checkout -b local_branch remote_branch
# It's OK if local_branch and remote_branch are the same names

Tags are imported as branches. You have to create a local branch, make a tag and delete the branch to have them as tags in Git. To do it with tag "v1":

git checkout -b tag_v1 remotes/tags/v1
git checkout master
git tag v1 tag_v1
git branch -D tag_v1

Clone your GIT-SVN repository into a clean Git repository:

git clone dest_dir-tmp dest_dir
rm -rf dest_dir-tmp
cd dest_dir

The local branches that you created earlier from remote branches will only have been copied as remote branches into the newly cloned repository. (Skip trunk/master.) For each branch you want to keep:

git checkout -b local_branch origin/remote_branch

Finally, remove the remote from your clean Git repository that points to the now-deleted temporary repository:

git remote rm origin

The three most influential factors for Eclipse speed are:

• Using the latest version of Eclipse (2020-06 as on 26 June 2020)
  Note that David Balažic's comment (July 2014) contradicts that criteria which was working six years ago:

The "same" workspace in Indigo (3.7.2) SR2 loads in 4 seconds, in Kepler SR2 (4.3.2) in 7 seconds and in Luna (4.4.0) in 10 seconds. All are Java EE bundles. Newer versions have more bundled plugins, but still the trend is obvious. (by "same" workspace I mean: same (additionally installed) plugins used, same projects checked out from version control).

• Launching it with the latest JDK (Java 14 at the time of writing, which does not prevent you to compile in your Eclipse project with any other JDK you want: 1.4.2, 1.5, 1.6 older...)

    -vm jdk1.6.0_10\jre\bin\client\jvm.dll
  

• Configuring the eclipse.ini (see this question for a complete eclipse.ini)

    -Xms512m
    -Xmx4096m
    [...]
  

The Xmx argument is the amount of memory Eclipse will get (in simple terms). With -Xmx4g, it gets 4 GB of RAM, etc.

Note:

1. Referring to the jvm.dll has advantages:

• Splash screen coming up sooner.
• Eclipse.exe in the process list instead of java.exe.
• Firewalls: Eclipse wants access to the Internet instead of Java.
• Window management branding issues, especially on Windows and Mac.

Dec. 2020, Udo conforms in the comments

From version 4.8 (Photon) an up there was a steady speed gain after each version.
The main platform was optimized every release to load faster, enable more features for the dark theme and to add more features for newer Java versions for the Java development tools.
Especially with-in the last 3 versions the startup time was increased a lot. There should be a significant increase in start-up time with the newest version of Eclipse 2020-12.

In my experience it started a lot faster with each new version.
But: There are still plug-ins which do not follow the new way of using the Eclipse API and are therefore still slow to start.
Since the change to Java 11 as the minimum runtime version starting from Eclipse version 2020-09 at least the core system uses the newer features of the JVM. It is up to the providers of the other plug-ins to upgrade to newer APIs and to use the full power of modern CPUs (e.g. concurrent programming model).