Html – mailto link with HTML body

For HTML 4, the answer is technically:

ID and NAME tokens must begin with a letter ([A-Za-z]) and may be followed by any number of letters, digits ([0-9]), hyphens ("-"), underscores ("_"), colons (":"), and periods (".").

HTML 5 is even more permissive, saying only that an id must contain at least one character and may not contain any space characters.

The id attribute is case sensitive in XHTML.

As a purely practical matter, you may want to avoid certain characters. Periods, colons and '#' have special meaning in CSS selectors, so you will have to escape those characters using a backslash in CSS or a double backslash in a selector string passed to jQuery. Think about how often you will have to escape a character in your stylesheets or code before you go crazy with periods and colons in ids.

For example, the HTML declaration <div id="first.name"></div> is valid. You can select that element in CSS as #first\.name and in jQuery like so: $('#first\\.name'). But if you forget the backslash, $('#first.name'), you will have a perfectly valid selector looking for an element with id first and also having class name. This is a bug that is easy to overlook. You might be happier in the long run choosing the id first-name (a hyphen rather than a period), instead.

You can simplify your development tasks by strictly sticking to a naming convention. For example, if you limit yourself entirely to lower-case characters and always separate words with either hyphens or underscores (but not both, pick one and never use the other), then you have an easy-to-remember pattern. You will never wonder "was it firstName or FirstName?" because you will always know that you should type first_name. Prefer camel case? Then limit yourself to that, no hyphens or underscores, and always, consistently use either upper-case or lower-case for the first character, don't mix them.

---

A now very obscure problem was that at least one browser, Netscape 6, incorrectly treated id attribute values as case-sensitive. That meant that if you had typed id="firstName" in your HTML (lower-case 'f') and #FirstName { color: red } in your CSS (upper-case 'F'), that buggy browser would have failed to set the element's color to red. At the time of this edit, April 2015, I hope you aren't being asked to support Netscape 6. Consider this a historical footnote.

Modern HTML5 Techniques for changing classes

Modern browsers have added classList which provides methods to make it easier to manipulate classes without needing a library:

document.getElementById("MyElement").classList.add('MyClass');

document.getElementById("MyElement").classList.remove('MyClass');

if ( document.getElementById("MyElement").classList.contains('MyClass') )

document.getElementById("MyElement").classList.toggle('MyClass');

Unfortunately, these do not work in Internet Explorer prior to v10, though there is a shim to add support for it to IE8 and IE9, available from this page. It is, though, getting more and more supported.

Simple cross-browser solution

The standard JavaScript way to select an element is using document.getElementById("Id"), which is what the following examples use - you can of course obtain elements in other ways, and in the right situation may simply use this instead - however, going into detail on this is beyond the scope of the answer.

To change all classes for an element:

To replace all existing classes with one or more new classes, set the className attribute:

document.getElementById("MyElement").className = "MyClass";

(You can use a space-delimited list to apply multiple classes.)

To add an additional class to an element:

To add a class to an element, without removing/affecting existing values, append a space and the new classname, like so:

document.getElementById("MyElement").className += " MyClass";

To remove a class from an element:

To remove a single class to an element, without affecting other potential classes, a simple regex replace is required:

document.getElementById("MyElement").className =
   document.getElementById("MyElement").className.replace
      ( /(?:^|\s)MyClass(?!\S)/g , '' )
/* Code wrapped for readability - above is all one statement */

An explanation of this regex is as follows:

(?:^|\s) # Match the start of the string or any single whitespace character

MyClass  # The literal text for the classname to remove

(?!\S)   # Negative lookahead to verify the above is the whole classname
         # Ensures there is no non-space character following
         # (i.e. must be the end of the string or space)

The g flag tells the replace to repeat as required, in case the class name has been added multiple times.

To check if a class is already applied to an element:

The same regex used above for removing a class can also be used as a check as to whether a particular class exists:

if ( document.getElementById("MyElement").className.match(/(?:^|\s)MyClass(?!\S)/) )

### Assigning these actions to onclick events:

Whilst it is possible to write JavaScript directly inside the HTML event attributes (such as onclick="this.className+=' MyClass'") this is not recommended behaviour. Especially on larger applications, more maintainable code is achieved by separating HTML markup from JavaScript interaction logic.

The first step to achieving this is by creating a function, and calling the function in the onclick attribute, for example:

<script type="text/javascript">
    function changeClass(){
        // Code examples from above
    }
</script>
...
<button onclick="changeClass()">My Button</button>

_{(It is not required to have this code in script tags, this is simply for the brevity of example, and including the JavaScript in a distinct file may be more appropriate.)}

The second step is to move the onclick event out of the HTML and into JavaScript, for example using addEventListener

<script type="text/javascript">
    function changeClass(){
        // Code examples from above
    }

    window.onload = function(){
        document.getElementById("MyElement").addEventListener( 'click', changeClass);
    }
</script>
...
<button id="MyElement">My Button</button>

(Note that the window.onload part is required so that the contents of that function are executed after the HTML has finished loading - without this, the MyElement might not exist when the JavaScript code is called, so that line would fail.)

JavaScript Frameworks and Libraries

The above code is all in standard JavaScript, however, it is common practice to use either a framework or a library to simplify common tasks, as well as benefit from fixed bugs and edge cases that you might not think of when writing your code.

Whilst some people consider it overkill to add a ~50  KB framework for simply changing a class, if you are doing any substantial amount of JavaScript work or anything that might have unusual cross-browser behavior, it is well worth considering.

(Very roughly, a library is a set of tools designed for a specific task, whilst a framework generally contains multiple libraries and performs a complete set of duties.)

The examples above have been reproduced below using jQuery, probably the most commonly used JavaScript library (though there are others worth investigating too).

(Note that $ here is the jQuery object.)

Changing Classes with jQuery:

$('#MyElement').addClass('MyClass');

$('#MyElement').removeClass('MyClass');

if ( $('#MyElement').hasClass('MyClass') )

In addition, jQuery provides a shortcut for adding a class if it doesn't apply, or removing a class that does:

$('#MyElement').toggleClass('MyClass');

### Assigning a function to a click event with jQuery:

$('#MyElement').click(changeClass);

or, without needing an id:

$(':button:contains(My Button)').click(changeClass);