Ios – DestinationViewController Segue and UINavigationController swift

iossegueswift

So I have a prepareForSegue method like this:

override func prepareForSegue(segue: UIStoryboardSegue, sender: AnyObject?) {
    if segue.identifier == "fromEventTableToAddEvent" {

        let addEventViewController: AddEventViewController = segue.destinationViewController as! AddEventViewController

        addEventViewController.newTagArray = newTagArray

    }
}

However, at runtime the app crashes and logs spit out this message:

Could not cast value of type 'UINavigationController'

The error comes because the addEventController is embedded in a navigation controller, however I'm not sure how I would set up the segue so that the destinationViewController is set to the NavigationController, but also allow me to pass variables in the prepareForSegue method to the addEventController

So how would I do this using Swift?

I extremely appreciate your help and time you may offer in response. It helps alot

Best Answer

You only need to access the navigation controller's topViewController, which will be the AddEventViewController. Here is the code:

override func prepareForSegue(segue: UIStoryboardSegue, sender: AnyObject?) {
    if segue.identifier == "fromEventTableToAddEvent" {

        let nav = segue.destinationViewController as! UINavigationController
        let addEventViewController = nav.topViewController as! AddEventViewController

        addEventViewController.newTagArray = newTagArray

    }
}

Using Objective-C Classes in Swift

If you have an existing class that you'd like to use, perform Step 2 and then skip to Step 5. (For some cases, I had to add an explicit #import <Foundation/Foundation.h to an older Objective-C File.)

Step 1: Add Objective-C Implementation -- .m

Add a .m file to your class, and name it CustomObject.m.

Step 2: Add Bridging Header

When adding your .m file, you'll likely be hit with a prompt that looks like this:

A macOS sheet-style dialog from Xcode asking if you would "like to configure an Objective-C bridging header"

Click Yes!

If you did not see the prompt, or accidentally deleted your bridging header, add a new .h file to your project and name it <#YourProjectName#>-Bridging-Header.h.

In some situations, particularly when working with Objective-C frameworks, you don't add an Objective-C class explicitly and Xcode can't find the linker. In this case, create your .h file named as mentioned above, then make sure you link its path in your target's project settings like so:

An animation demonstrating the above paragraph

Note:

It's best practice to link your project using the $(SRCROOT) macro so that if you move your project, or work on it with others using a remote repository, it will still work. $(SRCROOT) can be thought of as the directory that contains your .xcodeproj file. It might look like this:

$(SRCROOT)/Folder/Folder/<#YourProjectName#>-Bridging-Header.h

Step 3: Add Objective-C Header -- .h

Add another .h file and name it CustomObject.h.

Step 4: Build your Objective-C Class

In CustomObject.h

#import <Foundation/Foundation.h>

@interface CustomObject : NSObject

@property (strong, nonatomic) id someProperty;

- (void) someMethod;

@end

In CustomObject.m

#import "CustomObject.h"

@implementation CustomObject 

- (void) someMethod {
    NSLog(@"SomeMethod Ran");
}

@end

Step 5: Add Class to Bridging-Header

In YourProject-Bridging-Header.h:

#import "CustomObject.h"

Step 6: Use your Object

In SomeSwiftFile.swift:

var instanceOfCustomObject = CustomObject()
instanceOfCustomObject.someProperty = "Hello World"
print(instanceOfCustomObject.someProperty)
instanceOfCustomObject.someMethod()

There is no need to import explicitly; that's what the bridging header is for.

Using Swift Classes in Objective-C

Step 1: Create New Swift Class

Add a .swift file to your project, and name it MySwiftObject.swift.

In MySwiftObject.swift:

import Foundation

@objc(MySwiftObject)
class MySwiftObject : NSObject {

    @objc
    var someProperty: AnyObject = "Some Initializer Val" as NSString

    init() {}

    @objc
    func someFunction(someArg: Any) -> NSString {
        return "You sent me \(someArg)"
    }
}

Step 2: Import Swift Files to ObjC Class

In SomeRandomClass.m:

#import "<#YourProjectName#>-Swift.h"

The file:<#YourProjectName#>-Swift.h should already be created automatically in your project, even if you can not see it.

Step 3: Use your class

MySwiftObject * myOb = [MySwiftObject new];
NSLog(@"MyOb.someProperty: %@", myOb.someProperty);
myOb.someProperty = @"Hello World";
NSLog(@"MyOb.someProperty: %@", myOb.someProperty);

NSString * retString = [myOb someFunctionWithSomeArg:@"Arg"];

NSLog(@"RetString: %@", retString);

Notes:

If Code Completion isn't behaving as you expect, try running a quick build with ⌘⇧R to help Xcode find some of the Objective-C code from a Swift context and vice versa.
If you add a .swift file to an older project and get the error dyld: Library not loaded: @rpath/libswift_stdlib_core.dylib, try completely restarting Xcode.
While it was originally possible to use pure Swift classes (Not descendents of NSObject) which are visible to Objective-C by using the @objc prefix, this is no longer possible. Now, to be visible in Objective-C, the Swift object must either be a class conforming to NSObjectProtocol (easiest way to do this is to inherit from NSObject), or to be an enum marked @objc with a raw value of some integer type like Int. You may view the edit history for an example of Swift 1.x code using @objc without these restrictions.

Swift – #pragma mark in Swift

You can use // MARK:

There has also been discussion that liberal use of class extensions might be a better practice anyway. Since extensions can implement protocols, you can e.g. put all of your table view delegate methods in an extension and group your code at a more semantic level than #pragma mark is capable of.