It's certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time :)
There are three routes;
- Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
- Run Mac OS X Server under VMWare (Mac OS X 10.7 (Lion) onwards, read the update below).
- Use Delphi XE4 and the macincloud service. This is a commercial toolset, but the component and lib support is growing.
The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.
If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.
The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there's no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.
If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.
I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.
Alternatively, you could pick up a low-spec Mac Mini from eBay. You don't need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.
Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase
This little test worked for me... it involves setting up the bluetooth headset as the input also (not sure if that's what you want). Sorry about the crappy formatting on the code...
// create and set up the audio session
AVAudioSession* audioSession = [AVAudioSession sharedInstance];
[audioSession setDelegate:self];
[audioSession setCategory: AVAudioSessionCategoryPlayAndRecord error: nil];
[audioSession setActive: YES error: nil];
// set up for bluetooth microphone input
UInt32 allowBluetoothInput = 1;
OSStatus stat = AudioSessionSetProperty (
kAudioSessionProperty_OverrideCategoryEnableBluetoothInput,
sizeof (allowBluetoothInput),
&allowBluetoothInput
);
NSLog(@"status = %x", stat); // problem if this is not zero
// check the audio route
UInt32 size = sizeof(CFStringRef);
CFStringRef route;
OSStatus result = AudioSessionGetProperty(kAudioSessionProperty_AudioRoute, &size, &route);
NSLog(@"route = %@", route);
// if bluetooth headset connected, should be "HeadsetBT"
// if not connected, will be "ReceiverAndMicrophone"
// now, play a quick sound we put in the bundle (bomb.wav)
CFBundleRef mainBundle = CFBundleGetMainBundle();
CFURLRef soundFileURLRef;
SystemSoundID soundFileObject;
soundFileURLRef = CFBundleCopyResourceURL (mainBundle,CFSTR ("bomb"),CFSTR ("wav"),NULL);
AudioServicesCreateSystemSoundID (soundFileURLRef,&soundFileObject);
AudioServicesPlaySystemSound (soundFileObject); // should play into headset
Hope that helps!
Best Answer
To expand on my previous answer and comment:
You would use the AVAudioSession method
with
category
asAVAudioSessionCategoryPlayAndRecord
or
AVAudioSessionCategoryRecord
and
options
asAVAudioSessionCategoryOptionAllowBluetooth
In your reply you say
But according to the Apple docs
I understand that to mean bluetooth HFP, which I presume is what you are after. As regards "forcing", Apple is not too keen on apps forcing/overriding OS control of a user's experience of device behaviour.
It may be that this does not work in practice - I have not been able to test it. Presumably you have, and it fails (you don't indicate in your question). But you are hitting the limits of Apple's documentation on this issue. If you really can't get it to work I would be inclined to go with the deprecated C interface, and be prepared to make changes for iOS8.