OK, I had this exact problem and have searched the internet far and wide for a clear description of what you should do to resolve this.
I know this is an old topic, but I'm going to write this for the people who may stumble across this in their seemingly hopeless search for an answer.
I'm sure there is another way to do this, but in all honesty, unless you're working with a TON of apps and are feeling too lazy to reassign a new certificate, just do this!
I am really new to the dev center on apple.com and to xcode, so i'm going to write this out as thoroughly as I can.
Obvious:
READ ALL OF THESE INSTRUCTIONS BEFORE STARTING! THERE ARE A FEW TRICKY THINGS THAT SHOULD BE NOTED BEFORE STARTING! I TRIED TO MAKE THEM OBVIOUS IF YOU DIDN'T READ THEM ALL BEFORE YOU STARTED, BUT FOR SAFETY SAKE, read them all first.
You need a paid developer account to put ANYTHING on your iphone/ipod/ipad through Xcode.
Ok.
first, go to your applications folder and open keychain access.
Note that you can click on "login" and "System" words at the top left. This is vital to a later step, and to the next couple as well. You will need to unlock them if they are locked so that you can modify the content in each.
find your certificates(all of them, the worldwide dev one, the developer one, and possibly another one with the same name associated with it as the developer) in login and system
delete the bastards.
If you try deleting them, and they still stay in the list, you will just need to reboot your computer and do it again. This was the most annoying part of my journey to understanding the solution, so enjoy this information. A reboot will fix that issue if it arises.
Once all traces of those certificates are gone from the lists:
Get rid of the keys associated with those certificates. They will probably have your name attached to them and you can find them by clicking on "keys" at the bottom of keychain access window and looking in either the login or system list. Delete them and delete them good. Remember, if they don't leave the list after you press and confirm your deletion, reboot and it'll work.
IF YOU WORKED ON A DIFFERENT MACHINE WITH NO ISSUES AND THEN SWITCHED TO A NEW MACHINE AND EVERYTHING WENT HAYWIRE, THEN THERE WILL BE NO KEYS TO DELETE. THIS IS WHERE THE PROBLEM HAS BEEN FOR YOU. DO NOT WORRY! WE WILL CREATE NEW KEYS TOGETHER AND WE SHALL BE HAPPY!
Using SAFARI
Using SAFARI
Using SAFARI
(using safari is important because you will come across a needless error while trying to upload your certificate request otherwise. This was one tidbit of information that saved me from tearing all of my hair out as I tried time and time again to submit through Chrome.)
go to developer.apple.com and sign in and go to the ios portion of the dev center.
go to the ios provisioning portal on the right hand side of that screen.
click certificates, and REVOKE the current (and problematic) certificate.
click Home on the left hand side.
click on the "Launch Assistant" button under the "Get your application on an iOS with the Development Provisioning Assistant" headline towards the bottom of the screen.
Go through and follow all of the directions.
It will tell you to open up your applications folder and open keychain assistant.
at the top of your screen (next to the apple symbol, while the keychain access window is active (hey, i said i was going to make it easy for beginners) click on the words "Keychain Access"
click certificate assistant
click Request a certificate from a certificate authority.
fill in your information and then click saved to disk. and continue.
follow the steps to create the request file and save it to your desktop (which is default, so you will probably just need to say ok)
go back to your SAFARI window, and it will be asking you to choose the certificate request file.
choose it from the desktop and continue through the assistant until it's complete.
you have created the necessary public and private keys while creating the certificate request. SO YOU HAVE KEYS! YAAAAY!
next step is to download the WWDR intermediate certificate and your newly created development certificate.
Both of these can be found in the "certificate" tab on the left side of your screen. The WWDR is shown as a link under the development certificate list.
Download them and DO NOT CLICK THEM TO AUTOMATICALLY INSTALL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This is where you will get into stupid trouble and think, I DID EVERYTHING RIGHT! I DID WHAT YOU ASKED OF ME AND STILL THIS DOES NOT WORK!
Here's the trick. The final piece of the puzzle.
Open your downloads folder and find the downloaded files.
Open Keychan Access (if you closed it) and find the keys that were created while making your certificate request. They will be either in the login or the System list. Don't forget to unlock the lists if necessary.
Drag and drop the downloaded certificates INTO THE LIST WHERE THE KEYS ARE!
If you drag and drop them into the other list, the keys will have no idea that you did that, and they will be lonely forever and you will feel your chest tighten up and the rage of the unknown boiling from your gut.
If you dropped them into the list that contains the keys, then you will notice a little drop down arrow to the left of the iphone developer certificate you just dropped in there. Click it and revel in the beauty of a key hanging out with its long lost friend.
THAT'S IT!
Now when you make a new mobile provision through the ios portal, and link it inside there with your newly created certificate, everything will be copacetic inside Xcode.
With Xcode 4.2 and later versions, including Xcode 4.6, there is a better way to migrate your entire developer profile to a new machine. On your existing machine, launch Xcode and do this:
- Open the Organizer (Shift-Command-2).
- Select the Devices tab.
- Choose Developer Profile in the upper-left corner under LIBRARY, which may be under the heading library or under a heading called TEAMS.
- Choose Export near the bottom left side of
the window. Xcode asks you to choose a file name and password.
Edit for Xcode 4.4:
With Xcode 4.4, at step 3 choose Provisioning Profiles under LIBRARY. Then select your provisioning profiles either with the mouse or Command-A.
Also, Apple is making improvements in the way they manage this aspect of Xcode, and some users have reported that the Refresh button in the lower-right corner does the trick. So try clicking Refresh first, and if that doesn't help, do the export/import sequence.
Picture for Xcode 4.6 added by WP
Edit for Xcode 5.0 or newer:
- Open Xcode -> Preferences ('Command' + ',')
- Select the Apple ID from the list.
- Click on the SETTING icon near the bottom-left corner of window, and choose EXPORT ACCOUNTS... Xcode asks you to choose a file name and password.
On your new machine, launch Xcode and import the profile you exported above. Works like a charm.
Picture for Xcode 5.0 added by Ankur
Best Answer
I had the same problem: I first downloaded my certificates to my small MacBook while on the run. When trying to install the certificates on my iMac... then I ran into the problems described on this page.
After spending hours pulling my hair out like many of you, I performed the following steps to fix it:
Close all your stuff except your webpage that should be logged into App Dev center.
Open Xcode. Click WINDOW > ORGANIZER. Then click the Devices tab and select "Provisioning Profiles" on the left. That should bring up your provisioning profiles. Highlight one by one (if more than 1), right click and delete profile. Yes, just do it! Delete them all! (I kept making a new one after a new one trying to make the thing work.)
From the first page you see after logging into the App Dev Center on the right side click "iOS PROVISIONING PORTAL" > (do not "launch assistant"). Instead click on the left side. Select CERTIFICATES. You will probably have just one line listed with your name/company - from there click on the right side REVOKE. Click OK to verify that's what you want to do.
On the same page click DEVICES. Click the box next to your device you are trying to provision and click REMOVE SELECTED. Again click OK to verify.
Wait about 2 minutes to let Apple do their thing.
Now click on "HOME" that is on the left side navigation.
Click "Launch Assistant"
create a new app ID - call it whatever you want. Just make sure it's unique enough to know that's the one you just created because the others you've been messing with all day will not be deleted from Apples Dev Center.
You should be able to follow the rest of the Assistant without troubles -- the main thing is you just had to delete your old provision profiles and start over.
Good Luck!