There's no way to set the vertical-align on a UILabel, but you can get the same effect by changing the label's frame. I've made my labels orange so you can see clearly what's happening.

Here's the quick and easy way to do this:

    [myLabel sizeToFit];

If you have a label with longer text that will make more than one line, set numberOfLines to 0 (zero here means an unlimited number of lines).

    myLabel.numberOfLines = 0;
    [myLabel sizeToFit];

Longer Version

I'll make my label in code so that you can see what's going on. You can set up most of this in Interface Builder too. My setup is a View-Based App with a background image I made in Photoshop to show margins (20 points). The label is an attractive orange color so you can see what's going on with the dimensions.

- (void)viewDidLoad
{
    [super viewDidLoad];

    // 20 point top and left margin. Sized to leave 20 pt at right.
    CGRect labelFrame = CGRectMake(20, 20, 280, 150);
    UILabel *myLabel = [[UILabel alloc] initWithFrame:labelFrame];
    [myLabel setBackgroundColor:[UIColor orangeColor]];

    NSString *labelText = @"I am the very model of a modern Major-General, I've information vegetable, animal, and mineral";
    [myLabel setText:labelText];

    // Tell the label to use an unlimited number of lines
    [myLabel setNumberOfLines:0];
    [myLabel sizeToFit];

    [self.view addSubview:myLabel];
}

Some limitations of using sizeToFit come into play with center- or right-aligned text. Here's what happens:

    // myLabel.textAlignment = NSTextAlignmentRight;
    myLabel.textAlignment = NSTextAlignmentCenter;

    [myLabel setNumberOfLines:0];
    [myLabel sizeToFit];

The label is still sized with a fixed top-left corner. You can save the original label's width in a variable and set it after sizeToFit, or give it a fixed width to counter these problems:

    myLabel.textAlignment = NSTextAlignmentCenter;

    [myLabel setNumberOfLines:0];
    [myLabel sizeToFit];

    CGRect myFrame = myLabel.frame;
    // Resize the frame's width to 280 (320 - margins)
    // width could also be myOriginalLabelFrame.size.width
    myFrame = CGRectMake(myFrame.origin.x, myFrame.origin.y, 280, myFrame.size.height);
    myLabel.frame = myFrame;

Note that sizeToFit will respect your initial label's minimum width. If you start with a label 100 wide and call sizeToFit on it, it will give you back a (possibly very tall) label with 100 (or a little less) width. You might want to set your label to the minimum width you want before resizing.

Some other things to note:

Whether lineBreakMode is respected depends on how it's set. NSLineBreakByTruncatingTail (the default) is ignored after sizeToFit, as are the other two truncation modes (head and middle). NSLineBreakByClipping is also ignored. NSLineBreakByCharWrapping works as usual. The frame width is still narrowed to fit to the rightmost letter.

Mark Amery gave a fix for NIBs and Storyboards using Auto Layout in the comments:

If your label is included in a nib or storyboard as a subview of the view of a ViewController that uses autolayout, then putting your sizeToFit call into viewDidLoad won't work, because autolayout sizes and positions the subviews after viewDidLoad is called and will immediately undo the effects of your sizeToFit call. However, calling sizeToFit from within viewDidLayoutSubviews will work.

This uses the NSString method sizeWithFont:constrainedToSize:lineBreakMode: to calculate the frame height needed to fit a string, then sets the origin and width.

Resize the frame for the label using the text you want to insert. That way you can accommodate any number of lines.

CGSize maximumSize = CGSizeMake(300, 9999);
NSString *dateString = @"The date today is January 1st, 1999";
UIFont *dateFont = [UIFont fontWithName:@"Helvetica" size:14];
CGSize dateStringSize = [dateString sizeWithFont:dateFont 
        constrainedToSize:maximumSize 
        lineBreakMode:self.dateLabel.lineBreakMode];

CGRect dateFrame = CGRectMake(10, 10, 300, dateStringSize.height);

self.dateLabel.frame = dateFrame;

Important: This check should always be performed asynchronously. The majority of answers below are synchronous so be careful otherwise you'll freeze up your app.

Swift

1. Install via CocoaPods or Carthage: https://github.com/ashleymills/Reachability.swift

2. Test reachability via closures

   let reachability = Reachability()!
   
   reachability.whenReachable = { reachability in
       if reachability.connection == .wifi {
           print("Reachable via WiFi")
       } else {
           print("Reachable via Cellular")
       }
   }
   
   reachability.whenUnreachable = { _ in
       print("Not reachable")
   }
   
   do {
       try reachability.startNotifier()
   } catch {
       print("Unable to start notifier")
   }
   

Objective-C

1. Add SystemConfiguration framework to the project but don't worry about including it anywhere

2. Add Tony Million's version of Reachability.h and Reachability.m to the project (found here: https://github.com/tonymillion/Reachability)

3. Update the interface section

   #import "Reachability.h"
   
   // Add this to the interface in the .m file of your view controller
   @interface MyViewController ()
   {
       Reachability *internetReachableFoo;
   }
   @end
   

4. Then implement this method in the .m file of your view controller which you can call

   // Checks if we have an internet connection or not
   - (void)testInternetConnection
   {
       internetReachableFoo = [Reachability reachabilityWithHostname:@"www.google.com"];
   
       // Internet is reachable
       internetReachableFoo.reachableBlock = ^(Reachability*reach)
       {
           // Update the UI on the main thread
           dispatch_async(dispatch_get_main_queue(), ^{
               NSLog(@"Yayyy, we have the interwebs!");
           });
       };
   
       // Internet is not reachable
       internetReachableFoo.unreachableBlock = ^(Reachability*reach)
       {
           // Update the UI on the main thread
           dispatch_async(dispatch_get_main_queue(), ^{
               NSLog(@"Someone broke the internet :(");
           });
       };
   
       [internetReachableFoo startNotifier];
   }
   

Important Note: The Reachability class is one of the most used classes in projects so you might run into naming conflicts with other projects. If this happens, you'll have to rename one of the pairs of Reachability.h and Reachability.m files to something else to resolve the issue.

Note: The domain you use doesn't matter. It's just testing for a gateway to any domain.