What is the difference between -[UIViewController viewWillAppear:]
and -[UIViewController viewDidAppear:]
?
Ios – the difference between -viewWillAppear: and -viewDidAppear:
iosiphone
Related Solutions
The last two are identical; "atomic" is the default behavior (note that it is not actually a keyword; it is specified only by the absence of -- nonatomic
atomic
was added as a keyword in recent versions of llvm/clang).
Assuming that you are @synthesizing the method implementations, atomic vs. non-atomic changes the generated code. If you are writing your own setter/getters, atomic/nonatomic/retain/assign/copy are merely advisory. (Note: @synthesize is now the default behavior in recent versions of LLVM. There is also no need to declare instance variables; they will be synthesized automatically, too, and will have an _
prepended to their name to prevent accidental direct access).
With "atomic", the synthesized setter/getter will ensure that a whole value is always returned from the getter or set by the setter, regardless of setter activity on any other thread. That is, if thread A is in the middle of the getter while thread B calls the setter, an actual viable value -- an autoreleased object, most likely -- will be returned to the caller in A.
In nonatomic
, no such guarantees are made. Thus, nonatomic
is considerably faster than "atomic".
What "atomic" does not do is make any guarantees about thread safety. If thread A is calling the getter simultaneously with thread B and C calling the setter with different values, thread A may get any one of the three values returned -- the one prior to any setters being called or either of the values passed into the setters in B and C. Likewise, the object may end up with the value from B or C, no way to tell.
Ensuring data integrity -- one of the primary challenges of multi-threaded programming -- is achieved by other means.
Adding to this:
atomicity
of a single property also cannot guarantee thread safety when multiple dependent properties are in play.
Consider:
@property(atomic, copy) NSString *firstName;
@property(atomic, copy) NSString *lastName;
@property(readonly, atomic, copy) NSString *fullName;
In this case, thread A could be renaming the object by calling setFirstName:
and then calling setLastName:
. In the meantime, thread B may call fullName
in between thread A's two calls and will receive the new first name coupled with the old last name.
To address this, you need a transactional model. I.e. some other kind of synchronization and/or exclusion that allows one to exclude access to fullName
while the dependent properties are being updated.
You will only need a
ScrollView
if the contents you have now do not fit in the iPhone screen. (If you are adding theScrollView
as the superview of the components just to make theTextField
scroll up when keyboard comes up, then it's not needed.)The standard way to prevent the
TextField
s from being covered by the keyboard is to move the view up/down whenever the keyboard is shown.
Here is some sample code:
#define kOFFSET_FOR_KEYBOARD 80.0
-(void)keyboardWillShow {
// Animate the current view out of the way
if (self.view.frame.origin.y >= 0)
{
[self setViewMovedUp:YES];
}
else if (self.view.frame.origin.y < 0)
{
[self setViewMovedUp:NO];
}
}
-(void)keyboardWillHide {
if (self.view.frame.origin.y >= 0)
{
[self setViewMovedUp:YES];
}
else if (self.view.frame.origin.y < 0)
{
[self setViewMovedUp:NO];
}
}
-(void)textFieldDidBeginEditing:(UITextField *)sender
{
if ([sender isEqual:mailTf])
{
//move the main view, so that the keyboard does not hide it.
if (self.view.frame.origin.y >= 0)
{
[self setViewMovedUp:YES];
}
}
}
//method to move the view up/down whenever the keyboard is shown/dismissed
-(void)setViewMovedUp:(BOOL)movedUp
{
[UIView beginAnimations:nil context:NULL];
[UIView setAnimationDuration:0.3]; // if you want to slide up the view
CGRect rect = self.view.frame;
if (movedUp)
{
// 1. move the view's origin up so that the text field that will be hidden come above the keyboard
// 2. increase the size of the view so that the area behind the keyboard is covered up.
rect.origin.y -= kOFFSET_FOR_KEYBOARD;
rect.size.height += kOFFSET_FOR_KEYBOARD;
}
else
{
// revert back to the normal state.
rect.origin.y += kOFFSET_FOR_KEYBOARD;
rect.size.height -= kOFFSET_FOR_KEYBOARD;
}
self.view.frame = rect;
[UIView commitAnimations];
}
- (void)viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
// register for keyboard notifications
[[NSNotificationCenter defaultCenter] addObserver:self
selector:@selector(keyboardWillShow)
name:UIKeyboardWillShowNotification
object:nil];
[[NSNotificationCenter defaultCenter] addObserver:self
selector:@selector(keyboardWillHide)
name:UIKeyboardWillHideNotification
object:nil];
}
- (void)viewWillDisappear:(BOOL)animated
{
[super viewWillDisappear:animated];
// unregister for keyboard notifications while not visible.
[[NSNotificationCenter defaultCenter] removeObserver:self
name:UIKeyboardWillShowNotification
object:nil];
[[NSNotificationCenter defaultCenter] removeObserver:self
name:UIKeyboardWillHideNotification
object:nil];
}
Related Topic
- Ios – Xcode – How to fix ‘NSUnknownKeyException’, reason: … this class is not key value coding-compliant for the key X” error
- Ios – Why does viewWillAppear not get called when an app comes back from the background
- Ios – Version vs build in Xcode
- Ios – Difference between viewDidLoad and viewDidAppear
- Ios – What are Unwind segues for and how do you use them
- Ios – What’s the difference between all the Selection Segues
Best Answer
In general, this is what I do:
ViewDidLoad - Whenever I'm adding controls to a view that should appear together with the view, right away, I put it in the
ViewDidLoad
method. Basically, this method is called whenever the view was loaded into memory. So for example, if my view is a form with 3 labels, I would add the labels here; the view will never exist without these forms.ViewWillAppear: I use
ViewWillAppear
usually just to update the data on the form. So, for the example above, I would use this to actually load the data from my domain into the form. Creation ofUIViews
is fairly expensive, and you should avoid as much as possible doing that on theViewWillAppear
method because when this gets called, it means that the iPhone is already ready to show theUIView
to the user, and anything heavy you do here will impact performance in a very visible manner (like animations being delayed, etc).ViewDidAppear: Finally, I'm using
ViewDidAppear
to start off new threads to things that would take a long time to execute, like for example doing a web service call to get extra data for the form above. The good thing is that because the view already exists and is being displayed to the user, you can show a nice "Waiting" message to the user while you get the data.