Iphone – How to view the Live HTTP Headers sent/received by an iPhone App

It's certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time :)

There are three routes;

1. Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
2. Run Mac OS X Server under VMWare (Mac OS X 10.7 (Lion) onwards, read the update below).
3. Use Delphi XE4 and the macincloud service. This is a commercial toolset, but the component and lib support is growing.

The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.

If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.

The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there's no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.

If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.

I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.

Alternatively, you could pick up a low-spec Mac Mini from eBay. You don't need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.

Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase

I know this is an old post but it is still very relevant. I have found that modern browsers support rfc5987, which allows utf-8 encoding, percentage encoded (url-encoded). Then Naïve file.txt becomes:

Content-Disposition: attachment; filename*=UTF-8''Na%C3%AFve%20file.txt

Safari (5) does not support this. Instead you should use the Safari standard of writing the file name directly in your utf-8 encoded header:

Content-Disposition: attachment; filename=Naïve file.txt

IE8 and older don't support it either and you need to use the IE standard of utf-8 encoding, percentage encoded:

Content-Disposition: attachment; filename=Na%C3%AFve%20file.txt

In ASP.Net I use the following code:

string contentDisposition;
if (Request.Browser.Browser == "IE" && (Request.Browser.Version == "7.0" || Request.Browser.Version == "8.0"))
    contentDisposition = "attachment; filename=" + Uri.EscapeDataString(fileName);
else if (Request.Browser.Browser == "Safari")
    contentDisposition = "attachment; filename=" + fileName;
else
    contentDisposition = "attachment; filename*=UTF-8''" + Uri.EscapeDataString(fileName);
Response.AddHeader("Content-Disposition", contentDisposition);

I tested the above using IE7, IE8, IE9, Chrome 13, Opera 11, FF5, Safari 5.

Update November 2013:

Here is the code I currently use. I still have to support IE8, so I cannot get rid of the first part. It turns out that browsers on Android use the built in Android download manager and it cannot reliably parse file names in the standard way.

string contentDisposition;
if (Request.Browser.Browser == "IE" && (Request.Browser.Version == "7.0" || Request.Browser.Version == "8.0"))
    contentDisposition = "attachment; filename=" + Uri.EscapeDataString(fileName);
else if (Request.UserAgent != null && Request.UserAgent.ToLowerInvariant().Contains("android")) // android built-in download manager (all browsers on android)
    contentDisposition = "attachment; filename=\"" + MakeAndroidSafeFileName(fileName) + "\"";
else
    contentDisposition = "attachment; filename=\"" + fileName + "\"; filename*=UTF-8''" + Uri.EscapeDataString(fileName);
Response.AddHeader("Content-Disposition", contentDisposition);

The above now tested in IE7-11, Chrome 32, Opera 12, FF25, Safari 6, using this filename for download: 你好abcABCæøåÆØÅäöüïëêîâéíáóúýñ½§!#¤%&()=`@£$€{[]}+´¨^~'-_,;.txt

On IE7 it works for some characters but not all. But who cares about IE7 nowadays?

This is the function I use to generate safe file names for Android. Note that I don't know which characters are supported on Android but that I have tested that these work for sure:

private static readonly Dictionary<char, char> AndroidAllowedChars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ._-+,@£$€!½§~'=()[]{}0123456789".ToDictionary(c => c);
private string MakeAndroidSafeFileName(string fileName)
{
    char[] newFileName = fileName.ToCharArray();
    for (int i = 0; i < newFileName.Length; i++)
    {
        if (!AndroidAllowedChars.ContainsKey(newFileName[i]))
            newFileName[i] = '_';
    }
    return new string(newFileName);
}

@TomZ: I tested in IE7 and IE8 and it turned out that I did not need to escape apostrophe ('). Do you have an example where it fails?

@Dave Van den Eynde: Combining the two file names on one line as according to RFC6266 works except for Android and IE7+8 and I have updated the code to reflect this. Thank you for the suggestion.

@Thilo: No idea about GoodReader or any other non-browser. You might have some luck using the Android approach.

@Alex Zhukovskiy: I don't know why but as discussed on Connect it doesn't seem to work terribly well.