It's certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time :)
There are three routes;
- Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
- Run Mac OS X Server under VMWare (Mac OS X 10.7 (Lion) onwards, read the update below).
- Use Delphi XE4 and the macincloud service. This is a commercial toolset, but the component and lib support is growing.
The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.
If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.
The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there's no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.
If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.
I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.
Alternatively, you could pick up a low-spec Mac Mini from eBay. You don't need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.
Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase
You can use both libraries and get the best result on either 3.0 or 3.1 devices.
This would be fine since the iPhone OS minimum version that the AppStore uses is contained in your application's Info.plist file.
The iPhone OS version is retreivable using the following code from Apple's UI Device Class Reference:
float iPhoneOSVersion = [[[UIDevice currentDevice] systemVersion] floatValue];
if ( iPhoneOSVersion >= 3.1 ) {
useNewerFramework();
} else {
useOlderFramework();
}
However you should also make sure you set your deployment target in Xcode to 3.0 or whatever minimum version you wish to run on.
Best Answer
I do similar using UIViews and a bit of Core Graphics (Quartz 2D) and it works fine. I've found the custom drawing in Core Graphics pushes it a bit further, tho - UIViews work best when given images rather than having to draw themselves. Also watch out for lots of transparencies. You'll probably find that large or long (many frame) animations will be the killer, though. There are some techniques for minimising the impact of the animations which involves allowing it to purge images from memory if not being immediately displayed (I forget the setting). This may result in your animations not being as smooth as you they would otherwise be (not sure if Open GL ES would help here, though).
You should probably prototype using UIViews, and decide then if it's worth doing the extra work for OpenGL ES. Also, if you're not already familiar with OpenGL/ Open GL ES it's a steep learning curve.