Iphone – Open iPhone App from an Email Link

emailhyperlinkiphonelaunch

I've working on a program where an email is sent to a user, and a link to open the iPhone app is embedded in the email. The problem is that when the user clicks the link to open the app, mail has stripped out the colon, so the link no longer works!

The link being created basically looks like this:

@"<BR><BR><BR><A HREF=\"http://myApp://\">Open App</A>"

But the link, when clicked in the email, opens this in the browser instead:

myApp//

with no colon, so the app doesn't launch and the browser says it can't find the page.

Any ideas how to fix this? Thanks!

Best Answer

It just should be:

@"<BR><BR><BR><A HREF=\"myApp://\">Open App</A>"

As a workaround for custom urls being blocked by gmail, what you could do is set up something like http://myapp.mydomain.com/ up do redirect to myapp://... That way it'll look like a normal domain but open your app. On the plus you will be able to see how many people click your link, though on the down side it'll pop via Safari first.

Related Solutions

Ios – How to develop for iPhone using a Windows development machine

It's certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time :)

There are three routes;

Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
Run Mac OS X Server under VMWare (Mac OS X 10.7 (Lion) onwards, read the update below).
Use Delphi XE4 and the macincloud service. This is a commercial toolset, but the component and lib support is growing.

The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.

If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.

The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there's no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.

If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.

I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.

Alternatively, you could pick up a low-spec Mac Mini from eBay. You don't need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.

Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase

Javascript – How to validate an email address in JavaScript

Using regular expressions is probably the best way. You can see a bunch of tests here (taken from chromium)

function validateEmail(email) {
    const re = /^(([^<>()[\]\\.,;:\s@"]+(\.[^<>()[\]\\.,;:\s@"]+)*)|(".+"))@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\])|(([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}))$/;
    return re.test(String(email).toLowerCase());
}

Here's the example of regular expresion that accepts unicode:

const re = /^(([^<>()[\]\.,;:\s@\"]+(\.[^<>()[\]\.,;:\s@\"]+)*)|(\".+\"))@(([^<>()[\]\.,;:\s@\"]+\.)+[^<>()[\]\.,;:\s@\"]{2,})$/i;

But keep in mind that one should not rely only upon JavaScript validation. JavaScript can easily be disabled. This should be validated on the server side as well.

Here's an example of the above in action:

function validateEmail(email) {
  const re = /^(([^<>()[\]\\.,;:\s@\"]+(\.[^<>()[\]\\.,;:\s@\"]+)*)|(\".+\"))@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\])|(([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}))$/;
  return re.test(email);
}

function validate() {
  const $result = $("#result");
  const email = $("#email").val();
  $result.text("");

  if (validateEmail(email)) {
    $result.text(email + " is valid :)");
    $result.css("color", "green");
  } else {
    $result.text(email + " is not valid :(");
    $result.css("color", "red");
  }
  return false;
}

$("#email").on("input", validate);

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>

<label for=email>Enter an email address:</label>
<input id="email">
<h2 id="result"></h2>

Best Answer

Related Solutions

Ios – How to develop for iPhone using a Windows development machine

Javascript – How to validate an email address in JavaScript

Related Topic