Does anyone use Windows Authorization Manager (AzMan) anymore for "greenfield" projects? If so, are there any benefits to using the technology in an ASP.NET application as a membership/role provider?
Is Windows Authorization Manager (AzMan) Obsolete? Is it good to use in a new ASP.NET application
asp.netauthorizationmanagerazmanmembershipSecurity
Related Solutions
DISCLAIMER: This answer was written in 2008.
Since then, PHP has given us
password_hash
andpassword_verify
and, since their introduction, they are the recommended password hashing & checking method.The theory of the answer is still a good read though.
TL;DR
Don'ts
- Don't limit what characters users can enter for passwords. Only idiots do this.
- Don't limit the length of a password. If your users want a sentence with supercalifragilisticexpialidocious in it, don't prevent them from using it.
- Don't strip or escape HTML and special characters in the password.
- Never store your user's password in plain-text.
- Never email a password to your user except when they have lost theirs, and you sent a temporary one.
- Never, ever log passwords in any manner.
- Never hash passwords with SHA1 or MD5 or even SHA256! Modern crackers can exceed 60 and 180 billion hashes/second (respectively).
- Don't mix bcrypt and with the raw output of hash(), either use hex output or base64_encode it. (This applies to any input that may have a rogue
\0
in it, which can seriously weaken security.)
Dos
- Use scrypt when you can; bcrypt if you cannot.
- Use PBKDF2 if you cannot use either bcrypt or scrypt, with SHA2 hashes.
- Reset everyone's passwords when the database is compromised.
- Implement a reasonable 8-10 character minimum length, plus require at least 1 upper case letter, 1 lower case letter, a number, and a symbol. This will improve the entropy of the password, in turn making it harder to crack. (See the "What makes a good password?" section for some debate.)
Why hash passwords anyway?
The objective behind hashing passwords is simple: preventing malicious access to user accounts by compromising the database. So the goal of password hashing is to deter a hacker or cracker by costing them too much time or money to calculate the plain-text passwords. And time/cost are the best deterrents in your arsenal.
Another reason that you want a good, robust hash on a user accounts is to give you enough time to change all the passwords in the system. If your database is compromised you will need enough time to at least lock the system down, if not change every password in the database.
Jeremiah Grossman, CTO of Whitehat Security, stated on White Hat Security blog after a recent password recovery that required brute-force breaking of his password protection:
Interestingly, in living out this nightmare, I learned A LOT I didn’t know about password cracking, storage, and complexity. I’ve come to appreciate why password storage is ever so much more important than password complexity. If you don’t know how your password is stored, then all you really can depend upon is complexity. This might be common knowledge to password and crypto pros, but for the average InfoSec or Web Security expert, I highly doubt it.
(Emphasis mine.)
What makes a good password anyway?
Entropy. (Not that I fully subscribe to Randall's viewpoint.)
In short, entropy is how much variation is within the password. When a password is only lowercase roman letters, that's only 26 characters. That isn't much variation. Alpha-numeric passwords are better, with 36 characters. But allowing upper and lower case, with symbols, is roughly 96 characters. That's a lot better than just letters. One problem is, to make our passwords memorable we insert patterns—which reduces entropy. Oops!
Password entropy is approximated easily. Using the full range of ascii characters (roughly 96 typeable characters) yields an entropy of 6.6 per character, which at 8 characters for a password is still too low (52.679 bits of entropy) for future security. But the good news is: longer passwords, and passwords with unicode characters, really increase the entropy of a password and make it harder to crack.
There's a longer discussion of password entropy on the Crypto StackExchange site. A good Google search will also turn up a lot of results.
In the comments I talked with @popnoodles, who pointed out that enforcing a password policy of X length with X many letters, numbers, symbols, etc, can actually reduce entropy by making the password scheme more predictable. I do agree. Randomess, as truly random as possible, is always the safest but least memorable solution.
So far as I've been able to tell, making the world's best password is a Catch-22. Either its not memorable, too predictable, too short, too many unicode characters (hard to type on a Windows/Mobile device), too long, etc. No password is truly good enough for our purposes, so we must protect them as though they were in Fort Knox.
Best practices
Bcrypt and scrypt are the current best practices. Scrypt will be better than bcrypt in time, but it hasn't seen adoption as a standard by Linux/Unix or by webservers, and hasn't had in-depth reviews of its algorithm posted yet. But still, the future of the algorithm does look promising. If you are working with Ruby there is an scrypt gem that will help you out, and Node.js now has its own scrypt package. You can use Scrypt in PHP either via the Scrypt extension or the Libsodium extension (both are available in PECL).
I highly suggest reading the documentation for the crypt function if you want to understand how to use bcrypt, or finding yourself a good wrapper or use something like PHPASS for a more legacy implementation. I recommend a minimum of 12 rounds of bcrypt, if not 15 to 18.
I changed my mind about using bcrypt when I learned that bcrypt only uses blowfish's key schedule, with a variable cost mechanism. The latter lets you increase the cost to brute-force a password by increasing blowfish's already expensive key schedule.
Average practices
I almost can't imagine this situation anymore. PHPASS supports PHP 3.0.18 through 5.3, so it is usable on almost every installation imaginable—and should be used if you don't know for certain that your environment supports bcrypt.
But suppose that you cannot use bcrypt or PHPASS at all. What then?
Try an implementation of PDKBF2 with the maximum number of rounds that your environment/application/user-perception can tolerate. The lowest number I'd recommend is 2500 rounds. Also, make sure to use hash_hmac() if it is available to make the operation harder to reproduce.
Future Practices
Coming in PHP 5.5 is a full password protection library that abstracts away any pains of working with bcrypt. While most of us are stuck with PHP 5.2 and 5.3 in most common environments, especially shared hosts, @ircmaxell has built a compatibility layer for the coming API that is backward compatible to PHP 5.3.7.
Cryptography Recap & Disclaimer
The computational power required to actually crack a hashed password doesn't exist. The only way for computers to "crack" a password is to recreate it and simulate the hashing algorithm used to secure it. The speed of the hash is linearly related to its ability to be brute-forced. Worse still, most hash algorithms can be easily parallelized to perform even faster. This is why costly schemes like bcrypt and scrypt are so important.
You cannot possibly foresee all threats or avenues of attack, and so you must make your best effort to protect your users up front. If you do not, then you might even miss the fact that you were attacked until it's too late... and you're liable. To avoid that situation, act paranoid to begin with. Attack your own software (internally) and attempt to steal user credentials, or modify other user's accounts or access their data. If you don't test the security of your system, then you cannot blame anyone but yourself.
Lastly: I am not a cryptographer. Whatever I've said is my opinion, but I happen to think it's based on good ol' common sense ... and lots of reading. Remember, be as paranoid as possible, make things as hard to intrude as possible, and then, if you are still worried, contact a white-hat hacker or cryptographer to see what they say about your code/system.
How about taking another approach or angle at this problem? Ask why the password is required to be in plaintext: if it's so that the user can retrieve the password, then strictly speaking you don't really need to retrieve the password they set (they don't remember what it is anyway), you need to be able to give them a password they can use.
Think about it: if the user needs to retrieve the password, it's because they've forgotten it. In which case a new password is just as good as the old one. But, one of the drawbacks of common password reset mechanisms used today is that the generated passwords produced in a reset operation are generally a bunch of random characters, so they're difficult for the user to simply type in correctly unless they copy-n-paste. That can be a problem for less savvy computer users.
One way around that problem is to provide auto-generated passwords that are more or less natural language text. While natural language strings might not have the entropy that a string of random characters of the same length has, there's nothing that says your auto-generated password needs to have only 8 (or 10 or 12) characters. Get a high-entropy auto-generated passphrase by stringing together several random words (leave a space between them, so they're still recognizable and typeable by anyone who can read). Six random words of varying length are probably easier to type correctly and with confidence than 10 random characters, and they can have a higher entropy as well. For example, the entropy of a 10 character password drawn randomly from uppercase, lowercase, digits and 10 punctuation symbols (for a total of 72 valid symbols) would have an entropy of 61.7 bits. Using a dictionary of 7776 words (as Diceware uses) which could be randomly selected for a six word passphrase, the passphrase would have an entropy of 77.4 bits. See the Diceware FAQ for more info.
a passphrase with about 77 bits of entropy: "admit prose flare table acute flair"
a password with about 74 bits of entropy: "K:&$R^tt~qkD"
I know I'd prefer typing the phrase, and with copy-n-paste, the phrase is no less easy to use that the password either, so no loss there. Of course if your website (or whatever the protected asset is) doesn't need 77 bits of entropy for an auto-generated passphrase, generate fewer words (which I'm sure your users would appreciate).
I understand the arguments that there are password protected assets that really don't have a high level of value, so the breach of a password might not be the end of the world. For example, I probably wouldn't care if 80% of the passwords I use on various websites was breached: all that could happen is a someone spamming or posting under my name for a while. That wouldn't be great, but it's not like they'd be breaking into my bank account. However, given the fact that many people use the same password for their web forum sites as they do for their bank accounts (and probably national security databases), I think it would be best to handle even those 'low-value' passwords as non-recoverable.
Best Answer
The answer appears to be no. No one has answered this question, and a blog question posted in 2004 along with some more recent comments appear to convey mostly negative experiences folks have had. NetSqlAzMan would be worth investigating.
http://weblogs.asp.net/lorenh/archive/2004/02/24/79218.aspx
Some choice comments from the link:
1.
2.
3.
4.
5.
6.
7.
8.
9.