NOTE:
The mentioned LATEST
and RELEASE
metaversions have been dropped for plugin dependencies in Maven 3 "for the sake of reproducible builds", over 6 years ago.
(They still work perfectly fine for regular dependencies.)
For plugin dependencies please refer to this Maven 3 compliant solution.
If you always want to use the newest version, Maven has two keywords you can use as an alternative to version ranges. You should use these options with care as you are no longer in control of the plugins/dependencies you are using.
When you depend on a plugin or a dependency, you can use the a version value of LATEST or RELEASE. LATEST refers to the latest released or snapshot version of a particular artifact, the most recently deployed artifact in a particular repository. RELEASE refers to the last non-snapshot release in the repository. In general, it is not a best practice to design software which depends on a non-specific version of an artifact. If you are developing software, you might want to use RELEASE or LATEST as a convenience so that you don't have to update version numbers when a new release of a third-party library is released. When you release software, you should always make sure that your project depends on specific versions to reduce the chances of your build or your project being affected by a software release not under your control. Use LATEST and RELEASE with caution, if at all.
See the POM Syntax section of the Maven book for more details. Or see this doc on Dependency Version Ranges, where:
- A square bracket (
[
& ]
) means "closed" (inclusive).
- A parenthesis (
(
& )
) means "open" (exclusive).
Here's an example illustrating the various options. In the Maven repository, com.foo:my-foo has the following metadata:
<?xml version="1.0" encoding="UTF-8"?><metadata>
<groupId>com.foo</groupId>
<artifactId>my-foo</artifactId>
<version>2.0.0</version>
<versioning>
<release>1.1.1</release>
<versions>
<version>1.0</version>
<version>1.0.1</version>
<version>1.1</version>
<version>1.1.1</version>
<version>2.0.0</version>
</versions>
<lastUpdated>20090722140000</lastUpdated>
</versioning>
</metadata>
If a dependency on that artifact is required, you have the following options (other version ranges can be specified of course, just showing the relevant ones here):
Declare an exact version (will always resolve to 1.0.1):
<version>[1.0.1]</version>
Declare an explicit version (will always resolve to 1.0.1 unless a collision occurs, when Maven will select a matching version):
<version>1.0.1</version>
Declare a version range for all 1.x (will currently resolve to 1.1.1):
<version>[1.0.0,2.0.0)</version>
Declare an open-ended version range (will resolve to 2.0.0):
<version>[1.0.0,)</version>
Declare the version as LATEST (will resolve to 2.0.0) (removed from maven 3.x)
<version>LATEST</version>
Declare the version as RELEASE (will resolve to 1.1.1) (removed from maven 3.x):
<version>RELEASE</version>
Note that by default your own deployments will update the "latest" entry in the Maven metadata, but to update the "release" entry, you need to activate the "release-profile" from the Maven super POM. You can do this with either "-Prelease-profile" or "-DperformRelease=true"
It's worth emphasising that any approach that allows Maven to pick the dependency versions (LATEST, RELEASE, and version ranges) can leave you open to build time issues, as later versions can have different behaviour (for example the dependency plugin has previously switched a default value from true to false, with confusing results).
It is therefore generally a good idea to define exact versions in releases. As Tim's answer points out, the maven-versions-plugin is a handy tool for updating dependency versions, particularly the versions:use-latest-versions and versions:use-latest-releases goals.
Summarize other answers I found 11 main ways to do this (see below). And I wrote some performance tests (see results below):
Ways to convert an InputStream to a String:
Using IOUtils.toString
(Apache Utils)
String result = IOUtils.toString(inputStream, StandardCharsets.UTF_8);
Using CharStreams
(Guava)
String result = CharStreams.toString(new InputStreamReader(
inputStream, Charsets.UTF_8));
Using Scanner
(JDK)
Scanner s = new Scanner(inputStream).useDelimiter("\\A");
String result = s.hasNext() ? s.next() : "";
Using Stream API (Java 8). Warning: This solution converts different line breaks (like \r\n
) to \n
.
String result = new BufferedReader(new InputStreamReader(inputStream))
.lines().collect(Collectors.joining("\n"));
Using parallel Stream API (Java 8). Warning: This solution converts different line breaks (like \r\n
) to \n
.
String result = new BufferedReader(new InputStreamReader(inputStream))
.lines().parallel().collect(Collectors.joining("\n"));
Using InputStreamReader
and StringBuilder
(JDK)
int bufferSize = 1024;
char[] buffer = new char[bufferSize];
StringBuilder out = new StringBuilder();
Reader in = new InputStreamReader(stream, StandardCharsets.UTF_8);
for (int numRead; (numRead = in.read(buffer, 0, buffer.length)) > 0; ) {
out.append(buffer, 0, numRead);
}
return out.toString();
Using StringWriter
and IOUtils.copy
(Apache Commons)
StringWriter writer = new StringWriter();
IOUtils.copy(inputStream, writer, "UTF-8");
return writer.toString();
Using ByteArrayOutputStream
and inputStream.read
(JDK)
ByteArrayOutputStream result = new ByteArrayOutputStream();
byte[] buffer = new byte[1024];
for (int length; (length = inputStream.read(buffer)) != -1; ) {
result.write(buffer, 0, length);
}
// StandardCharsets.UTF_8.name() > JDK 7
return result.toString("UTF-8");
Using BufferedReader
(JDK). Warning: This solution converts different line breaks (like \n\r
) to line.separator
system property (for example, in Windows to "\r\n").
String newLine = System.getProperty("line.separator");
BufferedReader reader = new BufferedReader(
new InputStreamReader(inputStream));
StringBuilder result = new StringBuilder();
for (String line; (line = reader.readLine()) != null; ) {
if (result.length() > 0) {
result.append(newLine);
}
result.append(line);
}
return result.toString();
Using BufferedInputStream
and ByteArrayOutputStream
(JDK)
BufferedInputStream bis = new BufferedInputStream(inputStream);
ByteArrayOutputStream buf = new ByteArrayOutputStream();
for (int result = bis.read(); result != -1; result = bis.read()) {
buf.write((byte) result);
}
// StandardCharsets.UTF_8.name() > JDK 7
return buf.toString("UTF-8");
Using inputStream.read()
and StringBuilder
(JDK). Warning: This solution has problems with Unicode, for example with Russian text (works correctly only with non-Unicode text)
StringBuilder sb = new StringBuilder();
for (int ch; (ch = inputStream.read()) != -1; ) {
sb.append((char) ch);
}
return sb.toString();
Warning:
Solutions 4, 5 and 9 convert different line breaks to one.
Solution 11 can't work correctly with Unicode text
Performance tests
Performance tests for small String
(length = 175), url in github (mode = Average Time, system = Linux, score 1,343 is the best):
Benchmark Mode Cnt Score Error Units
8. ByteArrayOutputStream and read (JDK) avgt 10 1,343 ± 0,028 us/op
6. InputStreamReader and StringBuilder (JDK) avgt 10 6,980 ± 0,404 us/op
10. BufferedInputStream, ByteArrayOutputStream avgt 10 7,437 ± 0,735 us/op
11. InputStream.read() and StringBuilder (JDK) avgt 10 8,977 ± 0,328 us/op
7. StringWriter and IOUtils.copy (Apache) avgt 10 10,613 ± 0,599 us/op
1. IOUtils.toString (Apache Utils) avgt 10 10,605 ± 0,527 us/op
3. Scanner (JDK) avgt 10 12,083 ± 0,293 us/op
2. CharStreams (guava) avgt 10 12,999 ± 0,514 us/op
4. Stream Api (Java 8) avgt 10 15,811 ± 0,605 us/op
9. BufferedReader (JDK) avgt 10 16,038 ± 0,711 us/op
5. parallel Stream Api (Java 8) avgt 10 21,544 ± 0,583 us/op
Performance tests for big String
(length = 50100), url in github (mode = Average Time, system = Linux, score 200,715 is the best):
Benchmark Mode Cnt Score Error Units
8. ByteArrayOutputStream and read (JDK) avgt 10 200,715 ± 18,103 us/op
1. IOUtils.toString (Apache Utils) avgt 10 300,019 ± 8,751 us/op
6. InputStreamReader and StringBuilder (JDK) avgt 10 347,616 ± 130,348 us/op
7. StringWriter and IOUtils.copy (Apache) avgt 10 352,791 ± 105,337 us/op
2. CharStreams (guava) avgt 10 420,137 ± 59,877 us/op
9. BufferedReader (JDK) avgt 10 632,028 ± 17,002 us/op
5. parallel Stream Api (Java 8) avgt 10 662,999 ± 46,199 us/op
4. Stream Api (Java 8) avgt 10 701,269 ± 82,296 us/op
10. BufferedInputStream, ByteArrayOutputStream avgt 10 740,837 ± 5,613 us/op
3. Scanner (JDK) avgt 10 751,417 ± 62,026 us/op
11. InputStream.read() and StringBuilder (JDK) avgt 10 2919,350 ± 1101,942 us/op
Graphs (performance tests depending on Input Stream length in Windows 7 system)
Performance test (Average Time) depending on Input Stream length in Windows 7 system:
length 182 546 1092 3276 9828 29484 58968
test8 0.38 0.938 1.868 4.448 13.412 36.459 72.708
test4 2.362 3.609 5.573 12.769 40.74 81.415 159.864
test5 3.881 5.075 6.904 14.123 50.258 129.937 166.162
test9 2.237 3.493 5.422 11.977 45.98 89.336 177.39
test6 1.261 2.12 4.38 10.698 31.821 86.106 186.636
test7 1.601 2.391 3.646 8.367 38.196 110.221 211.016
test1 1.529 2.381 3.527 8.411 40.551 105.16 212.573
test3 3.035 3.934 8.606 20.858 61.571 118.744 235.428
test2 3.136 6.238 10.508 33.48 43.532 118.044 239.481
test10 1.593 4.736 7.527 20.557 59.856 162.907 323.147
test11 3.913 11.506 23.26 68.644 207.591 600.444 1211.545
Best Answer
OK, I have found the problem.
I use some reporting plugins. In the documentation of the
failsafe-maven-plugin
I found, that the<encoding>
configuration - of course - uses${project.reporting.outputEncoding}
by default.So I added the property as a child element of the
project
element and everything is fine now:See also http://maven.apache.org/general.html#encoding-warning