ServletContext
When the servlet container (like Apache Tomcat) starts up, it will deploy and load all its web applications. When a web application is loaded, the servlet container creates the ServletContext once and keeps it in the server's memory. The web app's web.xml and all of included web-fragment.xml files is parsed, and each <servlet>, <filter> and <listener> found (or each class annotated with @WebServlet, @WebFilter and @WebListener respectively) is instantiated once and kept in the server's memory as well. For each instantiated filter, its init() method is invoked with a new FilterConfig.
When a Servlet has a <servlet><load-on-startup> or @WebServlet(loadOnStartup) value greater than 0, then its init() method is also invoked during startup with a new ServletConfig. Those servlets are initialized in the same order specified by that value (1 is 1st, 2 is 2nd, etc). If the same value is specified for more than one servlet, then each of those servlets is loaded in the same order as they appear in the web.xml, web-fragment.xml, or @WebServlet classloading. In the event the "load-on-startup" value is absent, the init() method will be invoked whenever the HTTP request hits that servlet for the very first time.
When the servlet container is finished with all of the above described initialization steps, then the ServletContextListener#contextInitialized() will be invoked.
When the servlet container shuts down, it unloads all web applications, invokes the destroy() method of all its initialized servlets and filters, and all ServletContext, Servlet, Filter and Listener instances are trashed. Finally the ServletContextListener#contextDestroyed() will be invoked.
HttpServletRequest and HttpServletResponse
The servlet container is attached to a web server that listens for HTTP requests on a certain port number (port 8080 is usually used during development and port 80 in production). When a client (e.g. user with a web browser, or programmatically using URLConnection) sends an HTTP request, the servlet container creates new HttpServletRequest and HttpServletResponse objects and passes them through any defined Filter in the chain and, eventually, the Servlet instance.
In the case of filters, the doFilter() method is invoked. When the servlet container's code calls chain.doFilter(request, response), the request and response continue on to the next filter, or hit the servlet if there are no remaining filters.
In the case of servlets, the service() method is invoked. By default, this method determines which one of the doXxx() methods to invoke based off of request.getMethod(). If the determined method is absent from the servlet, then an HTTP 405 error is returned in the response.
The request object provides access to all of the information about the HTTP request, such as its URL, headers, query string and body. The response object provides the ability to control and send the HTTP response the way you want by, for instance, allowing you to set the headers and the body (usually with generated HTML content from a JSP file). When the HTTP response is committed and finished, both the request and response objects are recycled and made available for reuse.
HttpSession
When a client visits the webapp for the first time and/or the HttpSession is obtained for the first time via request.getSession(), the servlet container creates a new HttpSession object, generates a long and unique ID (which you can get by session.getId()), and stores it in the server's memory. The servlet container also sets a Cookie in the Set-Cookie header of the HTTP response with JSESSIONID as its name and the unique session ID as its value.
As per the HTTP cookie specification (a contract any decent web browser and web server must adhere to), the client (the web browser) is required to send this cookie back in subsequent requests in the Cookie header for as long as the cookie is valid (i.e. the unique ID must refer to an unexpired session and the domain and path are correct). Using your browser's built-in HTTP traffic monitor, you can verify that the cookie is valid (press F12 in Chrome / Firefox 23+ / IE9+, and check the Net/Network tab). The servlet container will check the Cookie header of every incoming HTTP request for the presence of the cookie with the name JSESSIONID and use its value (the session ID) to get the associated HttpSession from server's memory.
The HttpSession stays alive until it has been idle (i.e. not used in a request) for more than the timeout value specified in <session-timeout>, a setting in web.xml. The timeout value defaults to 30 minutes. So, when the client doesn't visit the web app for longer than the time specified, the servlet container trashes the session. Every subsequent request, even with the cookie specified, will not have access to the same session anymore; the servlet container will create a new session.
On the client side, the session cookie stays alive for as long as the browser instance is running. So, if the client closes the browser instance (all tabs/windows), then the session is trashed on the client's side. In a new browser instance, the cookie associated with the session wouldn't exist, so it would no longer be sent. This causes an entirely new HttpSession to be created, with an entirely new session cookie being used.
In a nutshell
- The
ServletContext lives for as long as the web app lives. It is shared among all requests in all sessions.
- The
HttpSession lives for as long as the client is interacting with the web app with the same browser instance, and the session hasn't timed out at the server side. It is shared among all requests in the same session.
- The
HttpServletRequest and HttpServletResponse live from the time the servlet receives an HTTP request from the client, until the complete response (the web page) has arrived. It is not shared elsewhere.
- All
Servlet, Filter and Listener instances live as long as the web app lives. They are shared among all requests in all sessions.
- Any
attribute that is defined in ServletContext, HttpServletRequest and HttpSession will live as long as the object in question lives. The object itself represents the "scope" in bean management frameworks such as JSF, CDI, Spring, etc. Those frameworks store their scoped beans as an attribute of its closest matching scope.
Thread Safety
That said, your major concern is possibly thread safety. You should now know that servlets and filters are shared among all requests. That's the nice thing about Java, it's multithreaded and different threads (read: HTTP requests) can make use of the same instance. It would otherwise be too expensive to recreate, init() and destroy() them for every single request.
You should also realize that you should never assign any request or session scoped data as an instance variable of a servlet or filter. It will be shared among all other requests in other sessions. That's not thread-safe! The below example illustrates this:
public class ExampleServlet extends HttpServlet {
private Object thisIsNOTThreadSafe;
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
Object thisIsThreadSafe;
thisIsNOTThreadSafe = request.getParameter("foo"); // BAD!! Shared among all requests!
thisIsThreadSafe = request.getParameter("foo"); // OK, this is thread safe.
}
}
See also:
Best Answer
Accepting connections is a very low cost operation so it just doesn't make sense to dedicate more than one thread to this task.
No it doesn't because it's a very low cost operation in terms of CPU. As for file descriptors, each accepted connection is going to use a file descriptor, so the maxim number of the connections the server can accept is limited by the number of available file descriptors.
maxConnections cannot be higher the number of open file descriptors on the system. Keep in mind that other processes use file descriptors as well, so may want to be conservative with maxConnections in regards to the available file descriptors, let's say maxConnections < file descriptors / 2.
This is because in NIO a single handles all IO, and in BIO the server need to create/use a separate thread-per connection.
Yes, that's correct the connection request is accepted but the server not yet ready to being serving requests, so the connection is placed in the queue. This is done to prevent TCP/stack timing out connection requests which may look like a server down from the client point of view. In other words, server says 'I'm here and will process your request once I have resources to do it'.
Nope.
Hope this helps.
Regards,
Slava Imeshev