Javascript – jQuery to loop through elements with the same class

Modern HTML5 Techniques for changing classes

Modern browsers have added classList which provides methods to make it easier to manipulate classes without needing a library:

document.getElementById("MyElement").classList.add('MyClass');

document.getElementById("MyElement").classList.remove('MyClass');

if ( document.getElementById("MyElement").classList.contains('MyClass') )

document.getElementById("MyElement").classList.toggle('MyClass');

Unfortunately, these do not work in Internet Explorer prior to v10, though there is a shim to add support for it to IE8 and IE9, available from this page. It is, though, getting more and more supported.

Simple cross-browser solution

The standard JavaScript way to select an element is using document.getElementById("Id"), which is what the following examples use - you can of course obtain elements in other ways, and in the right situation may simply use this instead - however, going into detail on this is beyond the scope of the answer.

To change all classes for an element:

To replace all existing classes with one or more new classes, set the className attribute:

document.getElementById("MyElement").className = "MyClass";

(You can use a space-delimited list to apply multiple classes.)

To add an additional class to an element:

To add a class to an element, without removing/affecting existing values, append a space and the new classname, like so:

document.getElementById("MyElement").className += " MyClass";

To remove a class from an element:

To remove a single class to an element, without affecting other potential classes, a simple regex replace is required:

document.getElementById("MyElement").className =
   document.getElementById("MyElement").className.replace
      ( /(?:^|\s)MyClass(?!\S)/g , '' )
/* Code wrapped for readability - above is all one statement */

An explanation of this regex is as follows:

(?:^|\s) # Match the start of the string or any single whitespace character

MyClass  # The literal text for the classname to remove

(?!\S)   # Negative lookahead to verify the above is the whole classname
         # Ensures there is no non-space character following
         # (i.e. must be the end of the string or space)

The g flag tells the replace to repeat as required, in case the class name has been added multiple times.

To check if a class is already applied to an element:

The same regex used above for removing a class can also be used as a check as to whether a particular class exists:

if ( document.getElementById("MyElement").className.match(/(?:^|\s)MyClass(?!\S)/) )

### Assigning these actions to onclick events:

Whilst it is possible to write JavaScript directly inside the HTML event attributes (such as onclick="this.className+=' MyClass'") this is not recommended behaviour. Especially on larger applications, more maintainable code is achieved by separating HTML markup from JavaScript interaction logic.

The first step to achieving this is by creating a function, and calling the function in the onclick attribute, for example:

<script type="text/javascript">
    function changeClass(){
        // Code examples from above
    }
</script>
...
<button onclick="changeClass()">My Button</button>

_{(It is not required to have this code in script tags, this is simply for the brevity of example, and including the JavaScript in a distinct file may be more appropriate.)}

The second step is to move the onclick event out of the HTML and into JavaScript, for example using addEventListener

<script type="text/javascript">
    function changeClass(){
        // Code examples from above
    }

    window.onload = function(){
        document.getElementById("MyElement").addEventListener( 'click', changeClass);
    }
</script>
...
<button id="MyElement">My Button</button>

(Note that the window.onload part is required so that the contents of that function are executed after the HTML has finished loading - without this, the MyElement might not exist when the JavaScript code is called, so that line would fail.)

JavaScript Frameworks and Libraries

The above code is all in standard JavaScript, however, it is common practice to use either a framework or a library to simplify common tasks, as well as benefit from fixed bugs and edge cases that you might not think of when writing your code.

Whilst some people consider it overkill to add a ~50  KB framework for simply changing a class, if you are doing any substantial amount of JavaScript work or anything that might have unusual cross-browser behavior, it is well worth considering.

(Very roughly, a library is a set of tools designed for a specific task, whilst a framework generally contains multiple libraries and performs a complete set of duties.)

The examples above have been reproduced below using jQuery, probably the most commonly used JavaScript library (though there are others worth investigating too).

(Note that $ here is the jQuery object.)

Changing Classes with jQuery:

$('#MyElement').addClass('MyClass');

$('#MyElement').removeClass('MyClass');

if ( $('#MyElement').hasClass('MyClass') )

In addition, jQuery provides a shortcut for adding a class if it doesn't apply, or removing a class that does:

$('#MyElement').toggleClass('MyClass');

### Assigning a function to a click event with jQuery:

$('#MyElement').click(changeClass);

or, without needing an id:

$(':button:contains(My Button)').click(changeClass);

As of jQuery 1.7 you should use jQuery.fn.on with the selector parameter filled:

$(staticAncestors).on(eventName, dynamicChild, function() {});

Explanation:

This is called event delegation and works as followed. The event is attached to a static parent (staticAncestors) of the element that should be handled. This jQuery handler is triggered every time the event triggers on this element or one of the descendant elements. The handler then checks if the element that triggered the event matches your selector (dynamicChild). When there is a match then your custom handler function is executed.

---

Prior to this, the recommended approach was to use live():

$(selector).live( eventName, function(){} );

However, live() was deprecated in 1.7 in favour of on(), and completely removed in 1.9. The live() signature:

$(selector).live( eventName, function(){} );

... can be replaced with the following on() signature:

$(document).on( eventName, selector, function(){} );

---

For example, if your page was dynamically creating elements with the class name dosomething you would bind the event to a parent which already exists (this is the nub of the problem here, you need something that exists to bind to, don't bind to the dynamic content), this can be (and the easiest option) is document. Though bear in mind document may not be the most efficient option.

$(document).on('mouseover mouseout', '.dosomething', function(){
    // what you want to happen when mouseover and mouseout 
    // occurs on elements that match '.dosomething'
});

Any parent that exists at the time the event is bound is fine. For example

$('.buttons').on('click', 'button', function(){
    // do something here
});

would apply to

<div class="buttons">
    <!-- <button>s that are generated dynamically and added here -->
</div>