Linux – What does set -e mean in a bash script

bashlinuxshshell

I'm studying the content of this preinst file that the script executes before that package is unpacked from its Debian archive (.deb) file.

The script has the following code:

#!/bin/bash
set -e
# Automatically added by dh_installinit
if [ "$1" = install ]; then
   if [ -d /usr/share/MyApplicationName ]; then
     echo "MyApplicationName is just installed"
     return 1
   fi
   rm -Rf $HOME/.config/nautilus-actions/nautilus-actions.conf
   rm -Rf $HOME/.local/share/file-manager/actions/*
fi
# End automatically added section

My first query is about the line:

set -e

I think that the rest of the script is pretty simple: It checks whether the Debian/Ubuntu package manager is executing an install operation. If it is, it checks whether my application has just been installed on the system. If it has, the script prints the message "MyApplicationName is just installed" and ends (return 1 mean that ends with an “error”, doesn’t it?).

If the user is asking the Debian/Ubuntu package system to install my package, the script also deletes two directories.

Is this right or am I missing something?

Best Answer

From help set :

  -e  Exit immediately if a command exits with a non-zero status.

But it's considered bad practice by some (bash FAQ and irc freenode #bash FAQ authors). It's recommended to use:

trap 'do_something' ERR

to run do_something function when errors occur.

See http://mywiki.wooledge.org/BashFAQ/105

Related Solutions

Bash – How to check if a directory exists in a Bash shell script

To check if a directory exists in a shell script, you can use the following:

if [ -d "$DIRECTORY" ]; then
  # Control will enter here if $DIRECTORY exists.
fi

Or to check if a directory doesn't exist:

if [ ! -d "$DIRECTORY" ]; then
  # Control will enter here if $DIRECTORY doesn't exist.
fi

However, as Jon Ericson points out, subsequent commands may not work as intended if you do not take into account that a symbolic link to a directory will also pass this check. E.g. running this:

ln -s "$ACTUAL_DIR" "$SYMLINK"
if [ -d "$SYMLINK" ]; then 
  rmdir "$SYMLINK" 
fi

Will produce the error message:

rmdir: failed to remove `symlink': Not a directory

So symbolic links may have to be treated differently, if subsequent commands expect directories:

if [ -d "$LINK_OR_DIR" ]; then 
  if [ -L "$LINK_OR_DIR" ]; then
    # It is a symlink!
    # Symbolic link specific commands go here.
    rm "$LINK_OR_DIR"
  else
    # It's a directory!
    # Directory command goes here.
    rmdir "$LINK_OR_DIR"
  fi
fi

Take particular note of the double-quotes used to wrap the variables. The reason for this is explained by 8jean in another answer.

If the variables contain spaces or other unusual characters it will probably cause the script to fail.

Bash – How to get the source directory of a Bash script from within the script itself

#!/usr/bin/env bash

SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"

is a useful one-liner which will give you the full directory name of the script no matter where it is being called from.

It will work as long as the last component of the path used to find the script is not a symlink (directory links are OK). If you also want to resolve any links to the script itself, you need a multi-line solution:

#!/usr/bin/env bash

SOURCE="${BASH_SOURCE[0]}"
while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
  DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"
  SOURCE="$(readlink "$SOURCE")"
  [[ $SOURCE != /* ]] && SOURCE="$DIR/$SOURCE" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
done
DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"

This last one will work with any combination of aliases, source, bash -c, symlinks, etc.

Beware: if you cd to a different directory before running this snippet, the result may be incorrect!

Also, watch out for $CDPATH gotchas, and stderr output side effects if the user has smartly overridden cd to redirect output to stderr instead (including escape sequences, such as when calling update_terminal_cwd >&2 on Mac). Adding >/dev/null 2>&1 at the end of your cd command will take care of both possibilities.

To understand how it works, try running this more verbose form:

#!/usr/bin/env bash

SOURCE="${BASH_SOURCE[0]}"
while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
  TARGET="$(readlink "$SOURCE")"
  if [[ $TARGET == /* ]]; then
    echo "SOURCE '$SOURCE' is an absolute symlink to '$TARGET'"
    SOURCE="$TARGET"
  else
    DIR="$( dirname "$SOURCE" )"
    echo "SOURCE '$SOURCE' is a relative symlink to '$TARGET' (relative to '$DIR')"
    SOURCE="$DIR/$TARGET" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
  fi
done
echo "SOURCE is '$SOURCE'"
RDIR="$( dirname "$SOURCE" )"
DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"
if [ "$DIR" != "$RDIR" ]; then
  echo "DIR '$RDIR' resolves to '$DIR'"
fi
echo "DIR is '$DIR'"

And it will print something like:

SOURCE './scriptdir.sh' is a relative symlink to 'sym2/scriptdir.sh' (relative to '.')
SOURCE is './sym2/scriptdir.sh'
DIR './sym2' resolves to '/home/ubuntu/dotfiles/fo fo/real/real1/real2'
DIR is '/home/ubuntu/dotfiles/fo fo/real/real1/real2'

Best Answer

Related Solutions

Bash – How to check if a directory exists in a Bash shell script

Bash – How to get the source directory of a Bash script from within the script itself

Related Topic