Macos – change the baud rate stty on MAC terminal

macosserial-portsttyterminal

I need to use USB serial cable with baud rate of 115200.
I tried to set the rate with stty command from MACbook terminal application as follows;

$stty -f /dev/tty.usbserial-A103BTIB 115200

and confirmed the settings as follows;

$stty -f /dev/tty.usbserial-A103BTIB -a

&speed 9600 baud; 0 rows; 0 columns;
lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl
    -echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin
    -nokerninfo -extproc
iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff -ixany -imaxbel -iutf8
    -ignbrk -brkint -inpck -ignpar -parmrk
oflags: -opost -onlcr -oxtabs -onocr -onlret
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb crtscts -dsrflow
    -dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T;
stop = ^S; susp = ^Z; time = 0; werase = ^W;

It looks baud rate is till 9600. Could somebody show me how to change this step by step ?

Best Answer

It seems like this is a common problem of stty command in OSX and not solved.

https://discussions.apple.com/thread/3798003?tstart=0

Related Solutions

Macos – How to move the cursor word by word in the OS X Terminal

Out of the box you can use the quite bizarre Esc+F to move to the beginning of the next word and Esc+B to move to the beginning of the current word.

Python – How to print colored text to the terminal

This somewhat depends on what platform you are on. The most common way to do this is by printing ANSI escape sequences. For a simple example, here's some Python code from the Blender build scripts:

class bcolors:
    HEADER = '\033[95m'
    OKBLUE = '\033[94m'
    OKCYAN = '\033[96m'
    OKGREEN = '\033[92m'
    WARNING = '\033[93m'
    FAIL = '\033[91m'
    ENDC = '\033[0m'
    BOLD = '\033[1m'
    UNDERLINE = '\033[4m'

To use code like this, you can do something like:

print(bcolors.WARNING + "Warning: No active frommets remain. Continue?" + bcolors.ENDC)

Or, with Python 3.6+:

print(f"{bcolors.WARNING}Warning: No active frommets remain. Continue?{bcolors.ENDC}")

This will work on unixes including OS X, Linux and Windows (provided you use ANSICON, or in Windows 10 provided you enable VT100 emulation). There are ANSI codes for setting the color, moving the cursor, and more.

If you are going to get complicated with this (and it sounds like you are if you are writing a game), you should look into the "curses" module, which handles a lot of the complicated parts of this for you. The Python Curses HowTO is a good introduction.

If you are not using extended ASCII (i.e., not on a PC), you are stuck with the ASCII characters below 127, and '#' or '@' is probably your best bet for a block. If you can ensure your terminal is using a IBM extended ASCII character set, you have many more options. Characters 176, 177, 178 and 219 are the "block characters".

Some modern text-based programs, such as "Dwarf Fortress", emulate text mode in a graphical mode, and use images of the classic PC font. You can find some of these bitmaps that you can use on the Dwarf Fortress Wiki see (user-made tilesets).

The Text Mode Demo Contest has more resources for doing graphics in text mode.

Related Topic