MS Access DB Engine (32-bit) with Office 64-bit

32bit-64bitinstallshieldlegacymsde

We currently have a major issue using Microsoft Access Database Engine 2010. The engine comes in 64-bit and 32-bit forms, which is good. However, apparently you need to always install the 32-bit version if the host process is always 32-bit. Fine, we can do this.

Our software deals with a lot of legacy components that are 32-bit, and much of it is in VB6 code, which generates 32-bit assembly. So, we are under the assumption that the driver must also be installed as 32-bit. Indeed, when we install 32-bit drivers on a 64-bit machine, and run our 32-bit applications, it works correctly.

However, the problem begins when Office 2010 64-bit is installed on the system. Trust me, we've tried to educate users that 64-bit Office is largely unnecessary, to no avail. As computers come off the assembly line with 64-bit versions installed, we're unable to keep up with support requests when our software breaks something. Either the 64-bit Office breaks our installation, or our installation breaks their Office version, but it's not pretty either way. A further issue is that non-legacy software will sometimes install the 64-bit drivers (as they should), and the two versions simply do not coexist in any reasonable manner. Either our software breaks, or their software breaks.

So, has anybody managed to find a way to make the 32-bit drivers coexist with 64-bit installations? I have seen that installing with /passive flag allows the two to be installed, and our installer does use passive. Both are being installed, but once on the system either our software no longer works, or Office constantly repairs its installation. Is there any reasonable way to make this work?

Best Answer

Here's a workaround for installing the 64-bit version of the Microsoft Access Database Engine 2010 redistributable on a system with a 32-bit MS Office version installed:

  • Check the 64-bit registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\Common\FilesPaths" before installing the 64-bit version of the Microsoft Access Database Engine 2010 redistributable.
  • If it does not contain the "mso.dll" registry value, then you will need to rename or delete the value after installing the 64-bit version of the Microsoft Access Database Engine 2010 redistributable on a system with a 32-bit version of MS Office installed.
  • Use the "/passive" command line parameter to install the redistributable, e.g. "C:\directory path\AccessDatabaseEngine_x64.exe" /passive
  • Delete or rename the "mso.dll" registry value, which contains the path to the 64-bit version of MSO.DLL (and should not be used by 32-bit MS Office versions).

Now you can start a 32-bit MS Office application without the "re-configuring" issue. Note that the "mso.dll" registry value will already be present if a 64-bit version of MS Office is installed. In this case the value should not be deleted or renamed.

Also if you do not want to use the "/passive" command line parameter you can edit the AceRedist.msi file to remove the MS Office architecture check:

You can now use this file to install the Microsoft Access Database Engine 2010 redistributable on a system where a "conflicting" version of MS Office is installed (e.g. 64-bit version on system with 32-bit MS Office version) Make sure that you rename the "mso.dll" registry value as explained above (if needed).

Related Topic