No asp.net features on IIS 7.5

There is a simple work around that is much easier than building administration pages.

1. Create a new site on your server. You can name it MembershipAdminstrationYourActualSiteName. Binding does not matter as you will not be executing any pages on this site, but make sure it is running in the 2.0 default application pool.

2. Copy the web.config from your 4.0 site to the folder for the new site. Edit the file removing everything except the connectionString, authentication, memebership, roleManager and profile sections.

3. Now in IIS Manager access .NET Roles and .NET Users. Assuming you correctly edited the web.config file you should see the users and roles for your 4.0 application.

Chances are you need to install .NET 4 (Which will also create a new AppPool for you)

First make sure you have IIS installed then perform the following steps:

1. Open your command prompt (Windows + R) and type cmd and press ENTER
   ^{You may need to start this as an administrator if you have UAC enabled.
   To do so, locate the exe (usually you can start typing with Start Menu open), right click and select "Run as Administrator"}
2. Type cd C:\Windows\Microsoft.NET\Framework\v4.0.30319\ and press ENTER.
3. Type aspnet_regiis.exe -ir and press ENTER again.
   • If this is a fresh version of IIS (no other sites running on it) or you're not worried about the hosted sites breaking with a framework change you can use -i instead of -ir. This will change their AppPools for you and steps 5-on shouldn't be necessary.
   • at this point you will see it begin working on installing .NET's framework in to IIS for you
4. Close the DOS prompt, re-open your start menu and right click Computer and select Manage
5. Expand the left-hand side (Services and Applications) and select Internet Information Services
   • You'll now have a new applet within the content window exclusively for IIS.
6. Expand out your computer and locate the Application Pools node, and select it. (You should now see ASP.NET v4.0 listed)
7. Expand out your Sites node and locate the site you want to modify (select it)
8. To the right you'll notice Basic Settings... just below the Edit Site text. Click this, and a new window should appear
9. Select the .NET 4 AppPool using the Select... button and click ok.
10. Restart the site, and you should be good-to-go.

(You can repeat steps 7-on for every site you want to apply .NET 4 on as well).

Additional References:

1. .NET 4 Framework
   The framework for those that don't already have it.
2. How do I run a command with elevated privileges?
   Directions on how to run the command prompt with Administrator rights.
3. aspnet_regiis.exe options
   For those that might want to know what -ir or -i does (or the difference between them) or what other options are available. (I typically use -ir to prevent any older sites currently running from breaking on a framework change but that's up to you.)