The correct way to avoid SQL injection attacks, no matter which database you use, is to separate the data from SQL, so that data stays data and will never be interpreted as commands by the SQL parser. It is possible to create SQL statement with correctly formatted data parts, but if you don't fully understand the details, you should always use prepared statements and parameterized queries. These are SQL statements that are sent to and parsed by the database server separately from any parameters. This way it is impossible for an attacker to inject malicious SQL.
You basically have two options to achieve this:
Using PDO (for any supported database driver):
$stmt = $pdo->prepare('SELECT * FROM employees WHERE name = :name');
$stmt->execute([ 'name' => $name ]);
foreach ($stmt as $row) {
// Do something with $row
}
Using MySQLi (for MySQL):
$stmt = $dbConnection->prepare('SELECT * FROM employees WHERE name = ?');
$stmt->bind_param('s', $name); // 's' specifies the variable type => 'string'
$stmt->execute();
$result = $stmt->get_result();
while ($row = $result->fetch_assoc()) {
// Do something with $row
}
If you're connecting to a database other than MySQL, there is a driver-specific second option that you can refer to (for example, pg_prepare()
and pg_execute()
for PostgreSQL). PDO is the universal option.
Correctly setting up the connection
Note that when using PDO to access a MySQL database real prepared statements are not used by default. To fix this you have to disable the emulation of prepared statements. An example of creating a connection using PDO is:
$dbConnection = new PDO('mysql:dbname=dbtest;host=127.0.0.1;charset=utf8', 'user', 'password');
$dbConnection->setAttribute(PDO::ATTR_EMULATE_PREPARES, false);
$dbConnection->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION);
In the above example the error mode isn't strictly necessary, but it is advised to add it. This way the script will not stop with a Fatal Error
when something goes wrong. And it gives the developer the chance to catch
any error(s) which are throw
n as PDOException
s.
What is mandatory, however, is the first setAttribute()
line, which tells PDO to disable emulated prepared statements and use real prepared statements. This makes sure the statement and the values aren't parsed by PHP before sending it to the MySQL server (giving a possible attacker no chance to inject malicious SQL).
Although you can set the charset
in the options of the constructor, it's important to note that 'older' versions of PHP (before 5.3.6) silently ignored the charset parameter in the DSN.
Explanation
The SQL statement you pass to prepare
is parsed and compiled by the database server. By specifying parameters (either a ?
or a named parameter like :name
in the example above) you tell the database engine where you want to filter on. Then when you call execute
, the prepared statement is combined with the parameter values you specify.
The important thing here is that the parameter values are combined with the compiled statement, not an SQL string. SQL injection works by tricking the script into including malicious strings when it creates SQL to send to the database. So by sending the actual SQL separately from the parameters, you limit the risk of ending up with something you didn't intend.
Any parameters you send when using a prepared statement will just be treated as strings (although the database engine may do some optimization so parameters may end up as numbers too, of course). In the example above, if the $name
variable contains 'Sarah'; DELETE FROM employees
the result would simply be a search for the string "'Sarah'; DELETE FROM employees"
, and you will not end up with an empty table.
Another benefit of using prepared statements is that if you execute the same statement many times in the same session it will only be parsed and compiled once, giving you some speed gains.
Oh, and since you asked about how to do it for an insert, here's an example (using PDO):
$preparedStatement = $db->prepare('INSERT INTO table (column) VALUES (:column)');
$preparedStatement->execute([ 'column' => $unsafeValue ]);
Can prepared statements be used for dynamic queries?
While you can still use prepared statements for the query parameters, the structure of the dynamic query itself cannot be parametrized and certain query features cannot be parametrized.
For these specific scenarios, the best thing to do is use a whitelist filter that restricts the possible values.
// Value whitelist
// $dir can only be 'DESC', otherwise it will be 'ASC'
if (empty($dir) || $dir !== 'DESC') {
$dir = 'ASC';
}
Docker originally used LinuX Containers (LXC), but later switched to runC (formerly known as libcontainer), which runs in the same operating system as its host. This allows it to share a lot of the host operating system resources. Also, it uses a layered filesystem (AuFS) and manages networking.
AuFS is a layered file system, so you can have a read only part and a write part which are merged together. One could have the common parts of the operating system as read only (and shared amongst all of your containers) and then give each container its own mount for writing.
So, let's say you have a 1 GB container image; if you wanted to use a full VM, you would need to have 1 GB x number of VMs you want. With Docker and AuFS you can share the bulk of the 1 GB between all the containers and if you have 1000 containers you still might only have a little over 1 GB of space for the containers OS (assuming they are all running the same OS image).
A full virtualized system gets its own set of resources allocated to it, and does minimal sharing. You get more isolation, but it is much heavier (requires more resources). With Docker you get less isolation, but the containers are lightweight (require fewer resources). So you could easily run thousands of containers on a host, and it won't even blink. Try doing that with Xen, and unless you have a really big host, I don't think it is possible.
A full virtualized system usually takes minutes to start, whereas Docker/LXC/runC containers take seconds, and often even less than a second.
There are pros and cons for each type of virtualized system. If you want full isolation with guaranteed resources, a full VM is the way to go. If you just want to isolate processes from each other and want to run a ton of them on a reasonably sized host, then Docker/LXC/runC seems to be the way to go.
For more information, check out this set of blog posts which do a good job of explaining how LXC works.
Why is deploying software to a docker image (if that's the right term) easier than simply deploying to a consistent production environment?
Deploying a consistent production environment is easier said than done. Even if you use tools like Chef and Puppet, there are always OS updates and other things that change between hosts and environments.
Docker gives you the ability to snapshot the OS into a shared image, and makes it easy to deploy on other Docker hosts. Locally, dev, qa, prod, etc.: all the same image. Sure you can do this with other tools, but not nearly as easily or fast.
This is great for testing; let's say you have thousands of tests that need to connect to a database, and each test needs a pristine copy of the database and will make changes to the data. The classic approach to this is to reset the database after every test either with custom code or with tools like Flyway - this can be very time-consuming and means that tests must be run serially. However, with Docker you could create an image of your database and run up one instance per test, and then run all the tests in parallel since you know they will all be running against the same snapshot of the database. Since the tests are running in parallel and in Docker containers they could run all on the same box at the same time and should finish much faster. Try doing that with a full VM.
From comments...
Interesting! I suppose I'm still confused by the notion of "snapshot[ting] the OS". How does one do that without, well, making an image of the OS?
Well, let's see if I can explain. You start with a base image, and then make your changes, and commit those changes using docker, and it creates an image. This image contains only the differences from the base. When you want to run your image, you also need the base, and it layers your image on top of the base using a layered file system: as mentioned above, Docker uses AuFS. AuFS merges the different layers together and you get what you want; you just need to run it. You can keep adding more and more images (layers) and it will continue to only save the diffs. Since Docker typically builds on top of ready-made images from a registry, you rarely have to "snapshot" the whole OS yourself.
Best Answer
docker-compose.yml supports a
user
directive under services. The docs only mention it in therun
command, but it works the same.I have a similar setup and this is how I do it:
I have to run
export UID
before runningdocker-compose
and then that sets the default user to my current user. This allows logging / caching etc. to work as expected.