Php – Performance of FOR vs FOREACH in PHP

arraysfor-loopforeachperformancePHP

First of all, I understand in 90% of applications the performance difference is completely irrelevant, but I just need to know which is the faster construct. That and…

The information currently available on them on the net is confusing. A lot of people say foreach is bad, but technically it should be faster since it's suppose to simplify writing a array traversal using iterators. Iterators, which are again suppose to be faster, but in PHP are also apparently dead slow (or is this not a PHP thing?). I'm talking about the array functions: next() prev() reset() etc. well, if they are even functions and not one of those PHP language features that look like functions.

To narrow this down a little: I'm not interesting in traversing arrays in steps of anything more than 1 (no negative steps either, ie. reverse iteration). I'm also not interested in a traversal to and from arbitrary points, just 0 to length. I also don't see manipulating arrays with more than 1000 keys happening on a regular basis, but I do see a array being traversed multiple times in the logic of a application! Also as for operations, largely only string manipulation and echo'ing.

Here are few reference sites:
http://www.phpbench.com/
http://www.php.lt/benchmark/phpbench.php

What I hear everywhere:

foreach is slow, and thus for/while is faster
PHPs foreach copies the array it iterates over; to make it faster you need to use references
code like this: $key = array_keys($aHash); $size = sizeOf($key); for ($i=0; $i < $size; $i++) is faster than a foreach

Here's my problem. I wrote this test script: http://pastebin.com/1ZgK07US and no matter how many times I run the script, I get something like this:

foreach 1.1438131332397
foreach (using reference) 1.2919359207153
for 1.4262869358063
foreach (hash table) 1.5696921348572
for (hash table) 2.4778981208801

In short:

foreach is faster than foreach with reference
foreach is faster than for
foreach is faster than for for a hash table

Can someone explain?

Am I doing something wrong?
Is PHP foreach reference thing really making a difference? I mean why would it not copy it if you pass by reference?
What's the equivalent iterator code for the foreach statement; I've seen a few on the net but each time I test them the timing is way off; I've also tested a few simple iterator constructs but never seem to get even decent results — are the array iterators in PHP just awful?
Are there faster ways/methods/constructs to iterate though a array other than FOR/FOREACH (and WHILE)?

PHP Version 5.3.0

Edit: Answer
With help from people here I was able to piece together the answers to all question. I'll summarize them here:

"Am I doing something wrong?" The consensus seems to be: yes, I can't use echo in benchmarks. Personally, I still don't see how echo is some function with random time of execution or how any other function is somehow any different — that and the ability of that script to just generate the exact same results of foreach better than everything is hard to explain though just "you're using echo" (well what should I have been using). However, I concede the test should be done with something better; though a ideal compromise does not come to mind.
"Is PHP foreach reference thing really making a difference? I mean why would it not copy it if you pass by reference?" ircmaxell shows that yes it is, further testing seems to prove in most cases reference should be faster — though given my above snippet of code, most definitely doesn't mean all. I accept the issue is probably too non-intuitive to bother with at such a level and would require something extreme such as decompiling to actually determine which is better for each situation.
"What's the equivalent iterator code for the foreach statement; I've seen a few on the net but each time I test them the timing is way off; I've also tested a few simple iterator constructs but never seem to get even decent results — are the array iterators in PHP just awful?" ircmaxell provided the answer bellow; though the code might only be valid for PHP version >= 5
"Are there faster ways/methods/constructs to iterate though a array other than FOR/FOREACH (and WHILE)?" Thanks go to Gordon for the answer. Using new data types in PHP5 should give either a performance boost or memory boost (either of which might be desirable depending on your situation). While speed wise a lot of the new types of array don't seem to be better than array(), the splpriorityqueue and splobjectstorage do seem to be substantially faster. Link provided by Gordon: http://matthewturland.com/2010/05/20/new-spl-features-in-php-5-3/

Thank you everyone who tried to help.

I'll likely stick to foreach (the non-reference version) for any simple traversal.

Best Answer

My personal opinion is to use what makes sense in the context. Personally I almost never use for for array traversal. I use it for other types of iteration, but foreach is just too easy... The time difference is going to be minimal in most cases.

The big thing to watch for is:

for ($i = 0; $i < count($array); $i++) {

That's an expensive loop, since it calls count on every single iteration. So long as you're not doing that, I don't think it really matters...

As for the reference making a difference, PHP uses copy-on-write, so if you don't write to the array, there will be relatively little overhead while looping. However, if you start modifying the array within the array, that's where you'll start seeing differences between them (since one will need to copy the entire array, and the reference can just modify inline)...

As for the iterators, foreach is equivalent to:

$it->rewind();
while ($it->valid()) {
    $key = $it->key();     // If using the $key => $value syntax
    $value = $it->current();

    // Contents of loop in here

    $it->next();
}

As far as there being faster ways to iterate, it really depends on the problem. But I really need to ask, why? I understand wanting to make things more efficient, but I think you're wasting your time for a micro-optimization. Remember, Premature Optimization Is The Root Of All Evil...

Edit: Based upon the comment, I decided to do a quick benchmark run...

$a = array();
for ($i = 0; $i < 10000; $i++) {
    $a[] = $i;
}

$start = microtime(true);
foreach ($a as $k => $v) {
    $a[$k] = $v + 1;
}
echo "Completed in ", microtime(true) - $start, " Seconds\n";

$start = microtime(true);
foreach ($a as $k => &$v) {
    $v = $v + 1;
}
echo "Completed in ", microtime(true) - $start, " Seconds\n";

$start = microtime(true);
foreach ($a as $k => $v) {}
echo "Completed in ", microtime(true) - $start, " Seconds\n";

$start = microtime(true);
foreach ($a as $k => &$v) {}    
echo "Completed in ", microtime(true) - $start, " Seconds\n";

And the results:

Completed in 0.0073502063751221 Seconds
Completed in 0.0019769668579102 Seconds
Completed in 0.0011849403381348 Seconds
Completed in 0.00111985206604 Seconds

So if you're modifying the array in the loop, it's several times faster to use references...

And the overhead for just the reference is actually less than copying the array (this is on 5.3.2)... So it appears (on 5.3.2 at least) as if references are significantly faster...

EDIT: Using PHP 8.0 I got the following:

Completed in 0.0005030632019043 Seconds
Completed in 0.00066304206848145 Seconds
Completed in 0.00016379356384277 Seconds
Completed in 0.00056815147399902 Seconds

Repeated this test numerous times and ranking results were consistent.

Deleting a single array element

If you want to delete just one array element you can use unset() or alternatively \array_splice().

If you know the value and don’t know the key to delete the element you can use \array_search() to get the key. This only works if the element does not occur more than once, since \array_search returns the first hit only.

`unset()`

Note that when you use unset() the array keys won’t change. If you want to reindex the keys you can use \array_values() after unset(), which will convert all keys to numerically enumerated keys starting from 0.

Code:

$array = [0 => "a", 1 => "b", 2 => "c"];
unset($array[1]);
          // ↑ Key which you want to delete

Output:

[
    [0] => a
    [2] => c
]

`\array_splice()` method

If you use \array_splice() the keys will automatically be reindexed, but the associative keys won’t change — as opposed to \array_values(), which will convert all keys to numerical keys.

\array_splice() needs the offset, not the key, as the second parameter.

Code:

$array = [0 => "a", 1 => "b", 2 => "c"];
\array_splice($array, 1, 1);
                   // ↑ Offset which you want to delete

Output:

[
    [0] => a
    [1] => c
]

array_splice(), same as unset(), take the array by reference. You don’t assign the return values of those functions back to the array.

Deleting multiple array elements

If you want to delete multiple array elements and don’t want to call unset() or \array_splice() multiple times you can use the functions \array_diff() or \array_diff_key() depending on whether you know the values or the keys of the elements which you want to delete.

`\array_diff()` method

If you know the values of the array elements which you want to delete, then you can use \array_diff(). As before with unset() it won’t change the keys of the array.

Code:

$array = [0 => "a", 1 => "b", 2 => "c", 3 => "c"];
$array = \array_diff($array, ["a", "c"]);
                          // └────────┘
                          // Array values which you want to delete

Output:

[
    [1] => b
]

`\array_diff_key()` method

If you know the keys of the elements which you want to delete, then you want to use \array_diff_key(). You have to make sure you pass the keys as keys in the second parameter and not as values. Keys won’t reindex.

Code:

$array = [0 => "a", 1 => "b", 2 => "c"];
$array = \array_diff_key($array, [0 => "xy", "2" => "xy"]);
                               // ↑           ↑
                               // Array keys which you want to delete

Output:

[
    [1] => b
]

If you want to use unset() or \array_splice() to delete multiple elements with the same value you can use \array_keys() to get all the keys for a specific value and then delete all elements.

Best Answer

Related Solutions

Javascript – Which “href” value should I use for JavaScript links, “#” or “javascript:void(0)”

Php – Deleting an element from an array in PHP

Deleting a single array element

unset()

\array_splice() method

Deleting multiple array elements

\array_diff() method

\array_diff_key() method

Related Topic

`unset()`

`\array_splice()` method

`\array_diff()` method

`\array_diff_key()` method