Access modifiers
From docs.microsoft.com:
public
The type or member can be accessed by any other code in the same assembly or another assembly that references it.
private
The type or member can only be accessed by code in the same class or struct.
protected
The type or member can only be accessed by code in the same class or struct, or in a derived class.
private protected (added in C# 7.2)
The type or member can only be accessed by code in the same class or struct, or in a derived class from the same assembly, but not from another assembly.
internal
The type or member can be accessed by any code in the same assembly, but not from another assembly.
protected internal
The type or member can be accessed by any code in the same assembly, or by any derived class in another assembly.
When no access modifier is set, a default access modifier is used. So there is always some form of access modifier even if it's not set.
The static modifier on a class means that the class cannot be instantiated, and that all of its members are static. A static member has one version regardless of how many instances of its enclosing type are created.
A static class is basically the same as a non-static class, but there is one difference: a static class cannot be externally instantiated. In other words, you cannot use the new keyword to create a variable of the class type. Because there is no instance variable, you access the members of a static class by using the class name itself.
However, there is a such thing as a static constructor. Any class can have one of these, including static classes. They cannot be called directly & cannot have parameters (other than any type parameters on the class itself). A static constructor is called automatically to initialize the class before the first instance is created or any static members are referenced. Looks like this:
static class Foo()
{
static Foo()
{
Bar = "fubar";
}
public static string Bar { get; set; }
}
Static classes are often used as services, you can use them like so:
MyStaticClass.ServiceMethod(...);
I think the default place for access logs is
%SystemDrive%\inetpub\logs\LogFiles
Otherwise, check under IIS Manager, select the computer on the left pane, and in the middle pane, go under "Logging" in the IIS area. There you will se the default location for all sites (this is however overridable on all sites)
You could also look into
%SystemDrive%\Windows\System32\LogFiles\HTTPERR
Which will contain similar log files that only represents errors.
Best Answer
You have to let IIS pass throw your firewall.
First you have to know the port on which your site is running. Usually your address is like 127.0.0.1:82, 82 being the port number. If is nothing it may be 80. To be sure, go to IIS manager, and in the left expand Sites, R click on your site, Edit Bindings, and you will see the port no.
Go to CP -> Windows Firewall -> Advanced settings -> Inbound Rules -> New Rule... Select port, TCP, your port number and a name. Also make sure that if you have another firewall, add an exception for it too, or disable it.
If you have a router, it should work for your network IP (like 192.168...). To enter on you site with you public IP you will also have to enable "Port forwarding" for your port, or try to connect directly to internet.