Python – How to write the Fibonacci Sequence

fibonaccipythonsequences

I had originally coded the program wrongly. Instead of returning the Fibonacci numbers between a range (ie. startNumber 1, endNumber 20 should = only those numbers between 1 & 20), I have written for the program to display all Fibonacci numbers between a range (ie. startNumber 1, endNumber 20 displays = First 20 Fibonacci numbers). I thought I had a sure-fire code. I also do not see why this is happening.

startNumber = int(raw_input("Enter the start number here "))
endNumber = int(raw_input("Enter the end number here "))

def fib(n):
    if n < 2:
        return n
    return fib(n-2) + fib(n-1)

print map(fib, range(startNumber, endNumber))

Someone pointed out in my Part II (which was closed for being a duplicate – https://stackoverflow.com/questions/504193/how-to-write-the-fibonacci-sequence-in-python-part-ii) that I need to pass the startNumber and endNumber through a generator using a while loop. Can someone please point me in the direction on how to do this? Any help is welcome.

I'm a learning programmer and I've run into a bit of a jumble. I am asked to write a program that will compute and display Fibonacci's Sequence by a user inputted start number and end number (ie. startNumber = 20 endNumber = 100 and it will display only the numbers between that range). The trick is to use it inclusively (which I do not know how to do in Python? – I'm assuming this means to use an inclusive range?).

What I have so far is no actual coding but rather:

Write Fib sequence formula to infinite
Display startNumber to endNumber only from Fib sequence.

I have no idea where to start and I am asking for ideas or insight into how to write this. I also have tried to write the Fib sequence forumla but I get lost on that as well.

Best Answer

There is lots of information about the Fibonacci Sequence on wikipedia and on wolfram. A lot more than you may need. Anyway it is a good thing to learn how to use these resources to find (quickly if possible) what you need.

Write Fib sequence formula to infinite

In math, it's given in a recursive form:

$fibonacci from wikipedia$

In programming, infinite doesn't exist. You can use a recursive form translating the math form directly in your language, for example in Python it becomes:

def F(n):
    if n == 0: return 0
    elif n == 1: return 1
    else: return F(n-1)+F(n-2)

Try it in your favourite language and see that this form requires a lot of time as n gets bigger. In fact, this is O(2ⁿ) in time.

Go on on the sites I linked to you and will see this (on wolfram):

This one is pretty easy to implement and very, very fast to compute, in Python:

from math import sqrt
def F(n):
    return ((1+sqrt(5))**n-(1-sqrt(5))**n)/(2**n*sqrt(5))

An other way to do it is following the definition (from wikipedia):

The first number of the sequence is 0, the second number is 1, and each subsequent number is equal to the sum of the previous two numbers of the sequence itself, yielding the sequence 0, 1, 1, 2, 3, 5, 8, etc.

If your language supports iterators you may do something like:

def F():
    a,b = 0,1
    while True:
        yield a
        a, b = b, a + b

Display startNumber to endNumber only from Fib sequence.

Once you know how to generate Fibonacci Numbers you just have to cycle trough the numbers and check if they verify the given conditions.

Suppose now you wrote a f(n) that returns the n-th term of the Fibonacci Sequence (like the one with sqrt(5) )

In most languages you can do something like:

def SubFib(startNumber, endNumber):
    n = 0
    cur = f(n)
    while cur <= endNumber:
        if startNumber <= cur:
            print cur
        n += 1
        cur = f(n)

In python I'd use the iterator form and go for:

def SubFib(startNumber, endNumber):
    for cur in F():
        if cur > endNumber: return
        if cur >= startNumber:
            yield cur

for i in SubFib(10, 200):
    print i

My hint is to learn to read what you need. Project Euler (google for it) will train you to do so :P Good luck and have fun!

Explanation

Say you have two dictionaries and you want to merge them into a new dictionary without altering the original dictionaries:

x = {'a': 1, 'b': 2}
y = {'b': 3, 'c': 4}

The desired result is to get a new dictionary (z) with the values merged, and the second dictionary's values overwriting those from the first.

>>> z
{'a': 1, 'b': 3, 'c': 4}

A new syntax for this, proposed in PEP 448 and available as of Python 3.5, is

z = {**x, **y}

And it is indeed a single expression.

Note that we can merge in with literal notation as well:

z = {**x, 'foo': 1, 'bar': 2, **y}

and now:

>>> z
{'a': 1, 'b': 3, 'foo': 1, 'bar': 2, 'c': 4}

It is now showing as implemented in the release schedule for 3.5, PEP 478, and it has now made its way into the What's New in Python 3.5 document.

However, since many organizations are still on Python 2, you may wish to do this in a backward-compatible way. The classically Pythonic way, available in Python 2 and Python 3.0-3.4, is to do this as a two-step process:

z = x.copy()
z.update(y) # which returns None since it mutates z

In both approaches, y will come second and its values will replace x's values, thus b will point to 3 in our final result.

Not yet on Python 3.5, but want a single expression

If you are not yet on Python 3.5 or need to write backward-compatible code, and you want this in a single expression, the most performant while the correct approach is to put it in a function:

def merge_two_dicts(x, y):
    """Given two dictionaries, merge them into a new dict as a shallow copy."""
    z = x.copy()
    z.update(y)
    return z

and then you have a single expression:

z = merge_two_dicts(x, y)

You can also make a function to merge an arbitrary number of dictionaries, from zero to a very large number:

def merge_dicts(*dict_args):
    """
    Given any number of dictionaries, shallow copy and merge into a new dict,
    precedence goes to key-value pairs in latter dictionaries.
    """
    result = {}
    for dictionary in dict_args:
        result.update(dictionary)
    return result

This function will work in Python 2 and 3 for all dictionaries. e.g. given dictionaries a to g:

z = merge_dicts(a, b, c, d, e, f, g)

and key-value pairs in g will take precedence over dictionaries a to f, and so on.

Critiques of Other Answers

Don't use what you see in the formerly accepted answer:

z = dict(x.items() + y.items())

In Python 2, you create two lists in memory for each dict, create a third list in memory with length equal to the length of the first two put together, and then discard all three lists to create the dict. In Python 3, this will fail because you're adding two dict_items objects together, not two lists -

>>> c = dict(a.items() + b.items())
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: unsupported operand type(s) for +: 'dict_items' and 'dict_items'

and you would have to explicitly create them as lists, e.g. z = dict(list(x.items()) + list(y.items())). This is a waste of resources and computation power.

Similarly, taking the union of items() in Python 3 (viewitems() in Python 2.7) will also fail when values are unhashable objects (like lists, for example). Even if your values are hashable, since sets are semantically unordered, the behavior is undefined in regards to precedence. So don't do this:

>>> c = dict(a.items() | b.items())

This example demonstrates what happens when values are unhashable:

>>> x = {'a': []}
>>> y = {'b': []}
>>> dict(x.items() | y.items())
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: unhashable type: 'list'

Here's an example where y should have precedence, but instead the value from x is retained due to the arbitrary order of sets:

>>> x = {'a': 2}
>>> y = {'a': 1}
>>> dict(x.items() | y.items())
{'a': 2}

Another hack you should not use:

z = dict(x, **y)

This uses the dict constructor and is very fast and memory-efficient (even slightly more so than our two-step process) but unless you know precisely what is happening here (that is, the second dict is being passed as keyword arguments to the dict constructor), it's difficult to read, it's not the intended usage, and so it is not Pythonic.

Here's an example of the usage being remediated in django.

Dictionaries are intended to take hashable keys (e.g. frozensets or tuples), but this method fails in Python 3 when keys are not strings.

>>> c = dict(a, **b)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: keyword arguments must be strings

From the mailing list, Guido van Rossum, the creator of the language, wrote:

I am fine with declaring dict({}, **{1:3}) illegal, since after all it is abuse of the ** mechanism.

and

Apparently dict(x, **y) is going around as "cool hack" for "call x.update(y) and return x". Personally, I find it more despicable than cool.

It is my understanding (as well as the understanding of the creator of the language) that the intended usage for dict(**y) is for creating dictionaries for readability purposes, e.g.:

dict(a=1, b=10, c=11)

instead of

{'a': 1, 'b': 10, 'c': 11}

Response to comments

Despite what Guido says, dict(x, **y) is in line with the dict specification, which btw. works for both Python 2 and 3. The fact that this only works for string keys is a direct consequence of how keyword parameters work and not a short-coming of dict. Nor is using the ** operator in this place an abuse of the mechanism, in fact, ** was designed precisely to pass dictionaries as keywords.

Again, it doesn't work for 3 when keys are not strings. The implicit calling contract is that namespaces take ordinary dictionaries, while users must only pass keyword arguments that are strings. All other callables enforced it. dict broke this consistency in Python 2:

>>> foo(**{('a', 'b'): None})
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: foo() keywords must be strings
>>> dict(**{('a', 'b'): None})
{('a', 'b'): None}

This inconsistency was bad given other implementations of Python (PyPy, Jython, IronPython). Thus it was fixed in Python 3, as this usage could be a breaking change.

I submit to you that it is malicious incompetence to intentionally write code that only works in one version of a language or that only works given certain arbitrary constraints.

More comments:

dict(x.items() + y.items()) is still the most readable solution for Python 2. Readability counts.

My response: merge_two_dicts(x, y) actually seems much clearer to me, if we're actually concerned about readability. And it is not forward compatible, as Python 2 is increasingly deprecated.

{**x, **y} does not seem to handle nested dictionaries. the contents of nested keys are simply overwritten, not merged [...] I ended up being burnt by these answers that do not merge recursively and I was surprised no one mentioned it. In my interpretation of the word "merging" these answers describe "updating one dict with another", and not merging.

Yes. I must refer you back to the question, which is asking for a shallow merge of two dictionaries, with the first's values being overwritten by the second's - in a single expression.

Assuming two dictionaries of dictionaries, one might recursively merge them in a single function, but you should be careful not to modify the dictionaries from either source, and the surest way to avoid that is to make a copy when assigning values. As keys must be hashable and are usually therefore immutable, it is pointless to copy them:

from copy import deepcopy

def dict_of_dicts_merge(x, y):
    z = {}
    overlapping_keys = x.keys() & y.keys()
    for key in overlapping_keys:
        z[key] = dict_of_dicts_merge(x[key], y[key])
    for key in x.keys() - overlapping_keys:
        z[key] = deepcopy(x[key])
    for key in y.keys() - overlapping_keys:
        z[key] = deepcopy(y[key])
    return z

Usage:

>>> x = {'a':{1:{}}, 'b': {2:{}}}
>>> y = {'b':{10:{}}, 'c': {11:{}}}
>>> dict_of_dicts_merge(x, y)
{'b': {2: {}, 10: {}}, 'a': {1: {}}, 'c': {11: {}}}

Coming up with contingencies for other value types is far beyond the scope of this question, so I will point you at my answer to the canonical question on a "Dictionaries of dictionaries merge".

Less Performant But Correct Ad-hocs

These approaches are less performant, but they will provide correct behavior. They will be much less performant than copy and update or the new unpacking because they iterate through each key-value pair at a higher level of abstraction, but they do respect the order of precedence (latter dictionaries have precedence)

You can also chain the dictionaries manually inside a dict comprehension:

{k: v for d in dicts for k, v in d.items()} # iteritems in Python 2.7

or in Python 2.6 (and perhaps as early as 2.4 when generator expressions were introduced):

dict((k, v) for d in dicts for k, v in d.items()) # iteritems in Python 2

itertools.chain will chain the iterators over the key-value pairs in the correct order:

from itertools import chain
z = dict(chain(x.items(), y.items())) # iteritems in Python 2

Performance Analysis

I'm only going to do the performance analysis of the usages known to behave correctly. (Self-contained so you can copy and paste yourself.)

from timeit import repeat
from itertools import chain

x = dict.fromkeys('abcdefg')
y = dict.fromkeys('efghijk')

def merge_two_dicts(x, y):
    z = x.copy()
    z.update(y)
    return z

min(repeat(lambda: {**x, **y}))
min(repeat(lambda: merge_two_dicts(x, y)))
min(repeat(lambda: {k: v for d in (x, y) for k, v in d.items()}))
min(repeat(lambda: dict(chain(x.items(), y.items()))))
min(repeat(lambda: dict(item for d in (x, y) for item in d.items())))

In Python 3.8.1, NixOS:

>>> min(repeat(lambda: {**x, **y}))
1.0804965235292912
>>> min(repeat(lambda: merge_two_dicts(x, y)))
1.636518670246005
>>> min(repeat(lambda: {k: v for d in (x, y) for k, v in d.items()}))
3.1779992282390594
>>> min(repeat(lambda: dict(chain(x.items(), y.items()))))
2.740647904574871
>>> min(repeat(lambda: dict(item for d in (x, y) for item in d.items())))
4.266070580109954

$ uname -a
Linux nixos 4.19.113 #1-NixOS SMP Wed Mar 25 07:06:15 UTC 2020 x86_64 GNU/Linux

Resources on Dictionaries

My explanation of Python's dictionary implementation, updated for 3.6.
Answer on how to add new keys to a dictionary
Mapping two lists into a dictionary
The official Python docs on dictionaries
The Dictionary Even Mightier - talk by Brandon Rhodes at Pycon 2017
Modern Python Dictionaries, A Confluence of Great Ideas - talk by Raymond Hettinger at Pycon 2017

Python – How to check whether a file exists without exceptions

If the reason you're checking is so you can do something like if file_exists: open_it(), it's safer to use a try around the attempt to open it. Checking and then opening risks the file being deleted or moved or something between when you check and when you try to open it.

If you're not planning to open the file immediately, you can use os.path.isfile

Return True if path is an existing regular file. This follows symbolic links, so both islink() and isfile() can be true for the same path.

import os.path
os.path.isfile(fname)

if you need to be sure it's a file.

Starting with Python 3.4, the pathlib module offers an object-oriented approach (backported to pathlib2 in Python 2.7):

from pathlib import Path

my_file = Path("/path/to/file")
if my_file.is_file():
    # file exists

To check a directory, do:

if my_file.is_dir():
    # directory exists

To check whether a Path object exists independently of whether is it a file or directory, use exists():

if my_file.exists():
    # path exists

You can also use resolve(strict=True) in a try block:

try:
    my_abs_path = my_file.resolve(strict=True)
except FileNotFoundError:
    # doesn't exist
else:
    # exists