Try opening the port as \\.\COMxx
Also make sure that the port isn't already open from another application. I recommend that you use Hyperterminal to see if the port is open.
tl;dr: Because of different default settings in C++ requiring more system calls.
By default, cin is synchronized with stdio, which causes it to avoid any input buffering. If you add this to the top of your main, you should see much better performance:
std::ios_base::sync_with_stdio(false);
Normally, when an input stream is buffered, instead of reading one character at a time, the stream will be read in larger chunks. This reduces the number of system calls, which are typically relatively expensive. However, since the FILE* based stdio and iostreams often have separate implementations and therefore separate buffers, this could lead to a problem if both were used together. For example:
int myvalue1;
cin >> myvalue1;
int myvalue2;
scanf("%d",&myvalue2);
If more input was read by cin than it actually needed, then the second integer value wouldn't be available for the scanf function, which has its own independent buffer. This would lead to unexpected results.
To avoid this, by default, streams are synchronized with stdio. One common way to achieve this is to have cin read each character one at a time as needed using stdio functions. Unfortunately, this introduces a lot of overhead. For small amounts of input, this isn't a big problem, but when you are reading millions of lines, the performance penalty is significant.
Fortunately, the library designers decided that you should also be able to disable this feature to get improved performance if you knew what you were doing, so they provided the sync_with_stdio method.
Best Answer
The baudrate is missing. You must specify baudrate. Most serial devices can not tolerate a wrong communication speed.