R – batch file for configuring the network setings

batch-filecommand linedosnetworking

i want to write a batch which will have the same effect as follows.
Here's what I do manually (which I want to program to do automatically):

1) START -> Run -> cmd (get command prompt)
2) ipconfig /release
3) START -> Connect to -> Show all connections
4) Right-click "Local Area Network" and click "Properties"
5) Highlight "Internet Protocol (TCP/IP) and click "Properties"
6) Check box "Use the following IP Address"
7) Enter "111.111.111.111" for IP address
8) Enter "255.0.0.0" for Subnet mask
9) Click OK, and Close.
10) Wait 20 seconds
11) START -> Connect to -> Show all connections
12) Check box for "Obtain IP address automatically"
13) Click OK, and close.
14) Wait 20 seconds.

Best Answer

Taken from here: http://support.microsoft.com/kb/257748

You can use netsh to perform all of the network setting manipulation. For example: 

netsh interface ip set address "Local Area Connection" static 192.168.0.10 255.255.255.0 192.168.0.1 1
Related Topic