Better option... just strip all non-digit characters on input (except 'x' and leading '+' signs), taking care because of the British tendency to write numbers in the non-standard form +44 (0) ...
when asked to use the international prefix (in that specific case, you should discard the (0)
entirely).
Then, you end up with values like:
12345678901
12345678901x1234
345678901x1234
12344678901
12345678901
12345678901
12345678901
+4112345678
+441234567890
Then when you display, reformat to your hearts content. e.g.
1 (234) 567-8901
1 (234) 567-8901 x1234
Bash Space-Separated (e.g., --option argument
)
cat >/tmp/demo-space-separated.sh <<'EOF'
#!/bin/bash
POSITIONAL=()
while [[ $# -gt 0 ]]; do
key="$1"
case $key in
-e|--extension)
EXTENSION="$2"
shift # past argument
shift # past value
;;
-s|--searchpath)
SEARCHPATH="$2"
shift # past argument
shift # past value
;;
-l|--lib)
LIBPATH="$2"
shift # past argument
shift # past value
;;
--default)
DEFAULT=YES
shift # past argument
;;
*) # unknown option
POSITIONAL+=("$1") # save it in an array for later
shift # past argument
;;
esac
done
set -- "${POSITIONAL[@]}" # restore positional parameters
echo "FILE EXTENSION = ${EXTENSION}"
echo "SEARCH PATH = ${SEARCHPATH}"
echo "LIBRARY PATH = ${LIBPATH}"
echo "DEFAULT = ${DEFAULT}"
echo "Number files in SEARCH PATH with EXTENSION:" $(ls -1 "${SEARCHPATH}"/*."${EXTENSION}" | wc -l)
if [[ -n $1 ]]; then
echo "Last line of file specified as non-opt/last argument:"
tail -1 "$1"
fi
EOF
chmod +x /tmp/demo-space-separated.sh
/tmp/demo-space-separated.sh -e conf -s /etc -l /usr/lib /etc/hosts
Output from copy-pasting the block above
FILE EXTENSION = conf
SEARCH PATH = /etc
LIBRARY PATH = /usr/lib
DEFAULT =
Number files in SEARCH PATH with EXTENSION: 14
Last line of file specified as non-opt/last argument:
#93.184.216.34 example.com
Usage
demo-space-separated.sh -e conf -s /etc -l /usr/lib /etc/hosts
Bash Equals-Separated (e.g., --option=argument
)
cat >/tmp/demo-equals-separated.sh <<'EOF'
#!/bin/bash
for i in "$@"; do
case $i in
-e=*|--extension=*)
EXTENSION="${i#*=}"
shift # past argument=value
;;
-s=*|--searchpath=*)
SEARCHPATH="${i#*=}"
shift # past argument=value
;;
-l=*|--lib=*)
LIBPATH="${i#*=}"
shift # past argument=value
;;
--default)
DEFAULT=YES
shift # past argument with no value
;;
*)
# unknown option
;;
esac
done
echo "FILE EXTENSION = ${EXTENSION}"
echo "SEARCH PATH = ${SEARCHPATH}"
echo "LIBRARY PATH = ${LIBPATH}"
echo "DEFAULT = ${DEFAULT}"
echo "Number files in SEARCH PATH with EXTENSION:" $(ls -1 "${SEARCHPATH}"/*."${EXTENSION}" | wc -l)
if [[ -n $1 ]]; then
echo "Last line of file specified as non-opt/last argument:"
tail -1 $1
fi
EOF
chmod +x /tmp/demo-equals-separated.sh
/tmp/demo-equals-separated.sh -e=conf -s=/etc -l=/usr/lib /etc/hosts
Output from copy-pasting the block above
FILE EXTENSION = conf
SEARCH PATH = /etc
LIBRARY PATH = /usr/lib
DEFAULT =
Number files in SEARCH PATH with EXTENSION: 14
Last line of file specified as non-opt/last argument:
#93.184.216.34 example.com
Usage
demo-equals-separated.sh -e=conf -s=/etc -l=/usr/lib /etc/hosts
To better understand ${i#*=}
search for "Substring Removal" in this guide. It is functionally equivalent to `sed 's/[^=]*=//' <<< "$i"`
which calls a needless subprocess or `echo "$i" | sed 's/[^=]*=//'`
which calls two needless subprocesses.
Using bash with getopt[s]
getopt(1) limitations (older, relatively-recent getopt
versions):
- can't handle arguments that are empty strings
- can't handle arguments with embedded whitespace
More recent getopt
versions don't have these limitations. For more information, see these docs.
POSIX getopts
Additionally, the POSIX shell and others offer getopts
which doen't have these limitations. I've included a simplistic getopts
example.
cat >/tmp/demo-getopts.sh <<'EOF'
#!/bin/sh
# A POSIX variable
OPTIND=1 # Reset in case getopts has been used previously in the shell.
# Initialize our own variables:
output_file=""
verbose=0
while getopts "h?vf:" opt; do
case "$opt" in
h|\?)
show_help
exit 0
;;
v) verbose=1
;;
f) output_file=$OPTARG
;;
esac
done
shift $((OPTIND-1))
[ "${1:-}" = "--" ] && shift
echo "verbose=$verbose, output_file='$output_file', Leftovers: $@"
EOF
chmod +x /tmp/demo-getopts.sh
/tmp/demo-getopts.sh -vf /etc/hosts foo bar
Output from copy-pasting the block above
verbose=1, output_file='/etc/hosts', Leftovers: foo bar
Usage
demo-getopts.sh -vf /etc/hosts foo bar
The advantages of getopts
are:
- It's more portable, and will work in other shells like
dash
.
- It can handle multiple single options like
-vf filename
in the typical Unix way, automatically.
The disadvantage of getopts
is that it can only handle short options (-h
, not --help
) without additional code.
There is a getopts tutorial which explains what all of the syntax and variables mean. In bash, there is also help getopts
, which might be informative.
Best Answer
In
bash
, you should be able to do:Details on its workings are as follows:
ps
gives you the list of all the processes.grep
filters that based on your search string,[p]
is a trick to stop you picking up the actualgrep
process itself.awk
just gives you the second field of each line, which is the PID.$(x)
construct means to executex
then take its output and put it on the command line. The output of thatps
pipeline inside that construct above is the list of process IDs so you end up with a command likekill 1234 1122 7654
.Here's a transcript showing it in action:
and you can see it terminating all the sleepers.
Explaining the
grep '[p]ython csp_build.py'
bit in a bit more detail:When you do
sleep 3600 &
followed byps -ef | grep sleep
, you tend to get two processes withsleep
in it, thesleep 3600
and thegrep sleep
(because they both havesleep
in them, that's not rocket science).However,
ps -ef | grep '[s]leep'
won't create a process withsleep
in it, it instead createsgrep '[s]leep'
and here's the tricky bit: thegrep
doesn't find it because it's looking for the regular expression "any character from the character class[s]
(which iss
) followed byleep
.In other words, it's looking for
sleep
but the grep process isgrep '[s]leep'
which doesn't havesleep
in it.When I was shown this (by someone here on SO), I immediately started using it because
| grep -v grep
; and