Objective-c – How to create a NSTimer on a background thread

An Objective-C delegate is an object that has been assigned to the delegate property another object. To create one, you define a class that implements the delegate methods you're interested in, and mark that class as implementing the delegate protocol.

For example, suppose you have a UIWebView. If you'd like to implement its delegate's webViewDidStartLoad: method, you could create a class like this:

@interface MyClass<UIWebViewDelegate>
// ...
@end

@implementation MyClass
- (void)webViewDidStartLoad:(UIWebView *)webView { 
    // ... 
}
@end

Then you could create an instance of MyClass and assign it as the web view's delegate:

MyClass *instanceOfMyClass = [[MyClass alloc] init];
myWebView.delegate = instanceOfMyClass;

On the UIWebView side, it probably has code similar to this to see if the delegate responds to the webViewDidStartLoad: message using respondsToSelector: and send it if appropriate.

if([self.delegate respondsToSelector:@selector(webViewDidStartLoad:)]) {
    [self.delegate webViewDidStartLoad:self];
}

The delegate property itself is typically declared weak (in ARC) or assign (pre-ARC) to avoid retain loops, since the delegate of an object often holds a strong reference to that object. (For example, a view controller is often the delegate of a view it contains.)

Making Delegates for Your Classes

To define your own delegates, you'll have to declare their methods somewhere, as discussed in the Apple Docs on protocols. You usually declare a formal protocol. The declaration, paraphrased from UIWebView.h, would look like this:

@protocol UIWebViewDelegate <NSObject>
@optional
- (void)webViewDidStartLoad:(UIWebView *)webView;
// ... other methods here
@end

This is analogous to an interface or abstract base class, as it creates a special type for your delegate, UIWebViewDelegate in this case. Delegate implementors would have to adopt this protocol:

@interface MyClass <UIWebViewDelegate>
// ...
@end

And then implement the methods in the protocol. For methods declared in the protocol as @optional (like most delegate methods), you need to check with -respondsToSelector: before calling a particular method on it.

Naming

Delegate methods are typically named starting with the delegating class name, and take the delegating object as the first parameter. They also often use a will-, should-, or did- form. So, webViewDidStartLoad: (first parameter is the web view) rather than loadStarted (taking no parameters) for example.

Speed Optimizations

Instead of checking whether a delegate responds to a selector every time we want to message it, you can cache that information when delegates are set. One very clean way to do this is to use a bitfield, as follows:

@protocol SomethingDelegate <NSObject>
@optional
- (void)something:(id)something didFinishLoadingItem:(id)item;
- (void)something:(id)something didFailWithError:(NSError *)error;
@end

@interface Something : NSObject
@property (nonatomic, weak) id <SomethingDelegate> delegate;
@end

@implementation Something {
  struct {
    unsigned int didFinishLoadingItem:1;
    unsigned int didFailWithError:1;
  } delegateRespondsTo;
}
@synthesize delegate;

- (void)setDelegate:(id <SomethingDelegate>)aDelegate {
  if (delegate != aDelegate) {
    delegate = aDelegate;

    delegateRespondsTo.didFinishLoadingItem = [delegate respondsToSelector:@selector(something:didFinishLoadingItem:)];
    delegateRespondsTo.didFailWithError = [delegate respondsToSelector:@selector(something:didFailWithError:)];
  }
}
@end

Then, in the body, we can check that our delegate handles messages by accessing our delegateRespondsTo struct, rather than by sending -respondsToSelector: over and over again.

Informal Delegates

Before protocols existed, it was common to use a category on NSObject to declare the methods a delegate could implement. For example, CALayer still does this:

@interface NSObject(CALayerDelegate)
- (void)displayLayer:(CALayer *)layer;
// ... other methods here
@end

This tells the compiler that any object might implement displayLayer:.

You would then use the same -respondsToSelector: approach as described above to call this method. Delegates implement this method and assign the delegate property, and that's it (there's no declaring you conform to a protocol). This method is common in Apple's libraries, but new code should use the more modern protocol approach above, since this approach pollutes NSObject (which makes autocomplete less useful) and makes it hard for the compiler to warn you about typos and similar errors.

Firstly I'd like to draw your attention to the Cocoa/CF documentation (which is always a great first port of call). The Apple docs have a section at the top of each reference article called "Companion Guides", which lists guides for the topic being documented (if any exist). For example, with NSTimer, the documentation lists two companion guides:

• Timer Programming Topics for Cocoa
• Threading Programming Guide

For your situation, the Timer Programming Topics article is likely to be the most useful, whilst threading topics are related but not the most directly related to the class being documented. If you take a look at the Timer Programming Topics article, it's divided into two parts:

• Timers
• Using Timers

For articles that take this format, there is often an overview of the class and what it's used for, and then some sample code on how to use it, in this case in the "Using Timers" section. There are sections on "Creating and Scheduling a Timer", "Stopping a Timer" and "Memory Management". From the article, creating a scheduled, non-repeating timer can be done something like this:

[NSTimer scheduledTimerWithTimeInterval:2.0
    target:self
    selector:@selector(targetMethod:)
    userInfo:nil
    repeats:NO];

This will create a timer that is fired after 2.0 seconds and calls targetMethod: on self with one argument, which is a pointer to the NSTimer instance.

If you then want to look in more detail at the method you can refer back to the docs for more information, but there is explanation around the code too.

If you want to stop a timer that is one which repeats, (or stop a non-repeating timer before it fires) then you need to keep a pointer to the NSTimer instance that was created; often this will need to be an instance variable so that you can refer to it in another method. You can then call invalidate on the NSTimer instance:

[myTimer invalidate];
myTimer = nil;

It's also good practice to nil out the instance variable (for example if your method that invalidates the timer is called more than once and the instance variable hasn't been set to nil and the NSTimer instance has been deallocated, it will throw an exception).

Note also the point on Memory Management at the bottom of the article:

Because the run loop maintains the timer, from the perspective of memory management there's typically no need to keep a reference to a timer after you’ve scheduled it. Since the timer is passed as an argument when you specify its method as a selector, you can invalidate a repeating timer when appropriate within that method. In many situations, however, you also want the option of invalidating the timer—perhaps even before it starts. In this case, you do need to keep a reference to the timer, so that you can send it an invalidate message whenever appropriate. If you create an unscheduled timer (see “Unscheduled Timers”), then you must maintain a strong reference to the timer (in a reference-counted environment, you retain it) so that it is not deallocated before you use it.