How to get input from an XBox 360 controller

directxinputxbox360xna

I'm writing a program that needs to take input from an XBox 360 controller. The input will then be sent wirelessly to an RC Helicopter that I am building.

So far, I've learned that this can be done using either the XInput library from DirectX, or the Input framework in XNA.

I'm wondering if there are any other options available. The scope of my program is rather small, and having to install a large gaming library like DirectX or XNA seems like excessive. Further, I'd like the program to be cross platform and not Microsoft specific.

Is there a simple lightweight way I can grab the controller input with something like Python?

Edit to answer some comments:

The copter will have 6 total propellers, arranged in 3 co-axial pairs. Basically, it will be very similar to this, only it will cost about $1,000 rather than $15,000. It will use an Arduino for onboard processing, and Zigbee for wireless control.

The 360 controller was selected because it is well designed. It is very ergonomic and has all of the control inputs needed. For those familiar with helicopter controls, the left joystick will control the collective, the right joystick with control the pitch and roll, and the analog triggers will control the yaw. The analog triggers are a big feature for the 360 controller. PS and most others do not have them.

I have a webpage for the project, but it is still pretty sparse. I do plan on documenting the whole design though, so eventually it will be interesting.

http://tricopter.googlecode.com

On a side note, would it kill Google to have a blog feature for googlecode projects?

I would like the 360 controller input program to run in both Linux and Windows if possible. Eventually though, I'd like to hook the controller directly to an embedded microcontroller board (such as Arduino) so that I don't have to go through a computer, but its not a high priority at the moment.

Best Answer

It is not all that difficult. As the earlier guy mentioned, you can use the SDL libraries to read the status of the xbox controller and then you can do whatever you'd like with it.

There is a SDL tutorial: http://sdl.beuc.net/sdl.wiki/Handling_Joysticks which is fairly useful.

Note that an Xbox controller has the following:

  • two joysticks:
    • left joystick is axis 0 & 1;
    • left trigger is axis 2;
    • right joystick is axis 3 & 4;
    • right trigger is axis 5
  • one hat (the D-pad)
  • 11 SDL buttons
    • two of them are joystick center presses
  • two triggers (act as axis, see above)

The upcoming SDL v1.3 also will support force feedback (aka. haptic).

I assume, since this thread is several years old, you have already done something, so this post is primarily to inform future visitors.

Related Topic