I usually input command line arguments in Eclipse via run configuration. But I don't know how do achieve the same task in IntelliJ IDEA.
Intellij-idea – How to input command line arguments in IntelliJ IDEA
argumentscommand lineintellij-idea
Related Solutions
IntelliJ 14.X Onwards
From version 14.0 onwards, the path to the setting dialog is slightly different, a General submenu has been added between Editor and Appearance as shown below
IntelliJ 8.1.2 - 13.X
From IntelliJ 8.1.2 onwards, this option is in File | Settings1. Within the IDE Settings section of that dialog, you'll find it under Editor | Appearance.
- On a Mac, these are named IntelliJ IDEA | Preferences...
Bash Space-Separated (e.g., --option argument
)
cat >/tmp/demo-space-separated.sh <<'EOF'
#!/bin/bash
POSITIONAL=()
while [[ $# -gt 0 ]]; do
key="$1"
case $key in
-e|--extension)
EXTENSION="$2"
shift # past argument
shift # past value
;;
-s|--searchpath)
SEARCHPATH="$2"
shift # past argument
shift # past value
;;
-l|--lib)
LIBPATH="$2"
shift # past argument
shift # past value
;;
--default)
DEFAULT=YES
shift # past argument
;;
*) # unknown option
POSITIONAL+=("$1") # save it in an array for later
shift # past argument
;;
esac
done
set -- "${POSITIONAL[@]}" # restore positional parameters
echo "FILE EXTENSION = ${EXTENSION}"
echo "SEARCH PATH = ${SEARCHPATH}"
echo "LIBRARY PATH = ${LIBPATH}"
echo "DEFAULT = ${DEFAULT}"
echo "Number files in SEARCH PATH with EXTENSION:" $(ls -1 "${SEARCHPATH}"/*."${EXTENSION}" | wc -l)
if [[ -n $1 ]]; then
echo "Last line of file specified as non-opt/last argument:"
tail -1 "$1"
fi
EOF
chmod +x /tmp/demo-space-separated.sh
/tmp/demo-space-separated.sh -e conf -s /etc -l /usr/lib /etc/hosts
Output from copy-pasting the block above
FILE EXTENSION = conf
SEARCH PATH = /etc
LIBRARY PATH = /usr/lib
DEFAULT =
Number files in SEARCH PATH with EXTENSION: 14
Last line of file specified as non-opt/last argument:
#93.184.216.34 example.com
Usage
demo-space-separated.sh -e conf -s /etc -l /usr/lib /etc/hosts
Bash Equals-Separated (e.g., --option=argument
)
cat >/tmp/demo-equals-separated.sh <<'EOF'
#!/bin/bash
for i in "$@"; do
case $i in
-e=*|--extension=*)
EXTENSION="${i#*=}"
shift # past argument=value
;;
-s=*|--searchpath=*)
SEARCHPATH="${i#*=}"
shift # past argument=value
;;
-l=*|--lib=*)
LIBPATH="${i#*=}"
shift # past argument=value
;;
--default)
DEFAULT=YES
shift # past argument with no value
;;
*)
# unknown option
;;
esac
done
echo "FILE EXTENSION = ${EXTENSION}"
echo "SEARCH PATH = ${SEARCHPATH}"
echo "LIBRARY PATH = ${LIBPATH}"
echo "DEFAULT = ${DEFAULT}"
echo "Number files in SEARCH PATH with EXTENSION:" $(ls -1 "${SEARCHPATH}"/*."${EXTENSION}" | wc -l)
if [[ -n $1 ]]; then
echo "Last line of file specified as non-opt/last argument:"
tail -1 $1
fi
EOF
chmod +x /tmp/demo-equals-separated.sh
/tmp/demo-equals-separated.sh -e=conf -s=/etc -l=/usr/lib /etc/hosts
Output from copy-pasting the block above
FILE EXTENSION = conf
SEARCH PATH = /etc
LIBRARY PATH = /usr/lib
DEFAULT =
Number files in SEARCH PATH with EXTENSION: 14
Last line of file specified as non-opt/last argument:
#93.184.216.34 example.com
Usage
demo-equals-separated.sh -e=conf -s=/etc -l=/usr/lib /etc/hosts
To better understand ${i#*=}
search for "Substring Removal" in this guide. It is functionally equivalent to `sed 's/[^=]*=//' <<< "$i"`
which calls a needless subprocess or `echo "$i" | sed 's/[^=]*=//'`
which calls two needless subprocesses.
Using bash with getopt[s]
getopt(1) limitations (older, relatively-recent getopt
versions):
- can't handle arguments that are empty strings
- can't handle arguments with embedded whitespace
More recent getopt
versions don't have these limitations. For more information, see these docs.
POSIX getopts
Additionally, the POSIX shell and others offer getopts
which doen't have these limitations. I've included a simplistic getopts
example.
cat >/tmp/demo-getopts.sh <<'EOF'
#!/bin/sh
# A POSIX variable
OPTIND=1 # Reset in case getopts has been used previously in the shell.
# Initialize our own variables:
output_file=""
verbose=0
while getopts "h?vf:" opt; do
case "$opt" in
h|\?)
show_help
exit 0
;;
v) verbose=1
;;
f) output_file=$OPTARG
;;
esac
done
shift $((OPTIND-1))
[ "${1:-}" = "--" ] && shift
echo "verbose=$verbose, output_file='$output_file', Leftovers: $@"
EOF
chmod +x /tmp/demo-getopts.sh
/tmp/demo-getopts.sh -vf /etc/hosts foo bar
Output from copy-pasting the block above
verbose=1, output_file='/etc/hosts', Leftovers: foo bar
Usage
demo-getopts.sh -vf /etc/hosts foo bar
The advantages of getopts
are:
- It's more portable, and will work in other shells like
dash
. - It can handle multiple single options like
-vf filename
in the typical Unix way, automatically.
The disadvantage of getopts
is that it can only handle short options (-h
, not --help
) without additional code.
There is a getopts tutorial which explains what all of the syntax and variables mean. In bash, there is also help getopts
, which might be informative.
Related Topic
- Ruby – How to pass command line arguments to a rake task
- Python – How to read/process command line arguments
- Php – Reference — What does this symbol mean in PHP
- Javascript – How to pass command line arguments to a Node.js program
- Bash – How to reload .bash_profile from the command line
- Bash – How to set a variable to the output of a command in Bash
- Mysql – How to import an SQL file using the command line in MySQL
Best Answer
Windows, Linux, some Macs:
ALT+SHIFT+F10, Right, E, Enter, Tab, enter your command line parameters, Enter. ;-)
Mac with "OS X 10.5" key schema:
CTRL+ALT+R, Right, E, Enter, Tab, enter your command line parameters, Enter.