Bash – How to load ~/.bash_profile when entering bash from within zsh

bashmacosshellzshzshrc

I've used bash for two years, and just tried to switch to zsh shell on my OS X via homebrew. And I set my default (login) shell to zsh, and I confirmed it's set properly by seeing that when I launch my Terminal, it's zsh shell that is used in default.

However, when I try to enter bash shell from within zsh, it looks like not loading ~/.bash_profile, since I cannot run my command using aliases, which is defined in my ~/.bash_profile like alias julia="~/juila/julia", etc.. Also, the prompt is not what I set in the file and instead return bash-3.2$.

For some reasons, when I set my login shell to bash, and enter zsh from within bash, then ~/.zshrc is loaded properly.

So why is it not loaded whenever I run bash from within zsh? My ~/.bash_profile is symbolic linked to ~/Dropbox/.bash_profile in order to sync it with my other computers. Maybe does it cause the issue?

Best Answer

Open ~/.zshrc, and at the very bottom of the file, add the following:

if [ -f ~/.bash_profile ]; then 
    . ~/.bash_profile;
fi

Every time you open the terminal, it will load whatever is defined in ~/.bash_profile (if the file exist). With that, you can keep your custom settings for zsh (colors, and etc). And you get to keep your custom shell settings in .bash_profile file.

This is much cleaner than using bash -l IMO.

If you prefer putting your settings in .bashrc, or .bash_login, or .profile, you can do the same for them.

Related Solutions

Bash – How to check if a directory exists in a Bash shell script

To check if a directory exists in a shell script, you can use the following:

if [ -d "$DIRECTORY" ]; then
  # Control will enter here if $DIRECTORY exists.
fi

Or to check if a directory doesn't exist:

if [ ! -d "$DIRECTORY" ]; then
  # Control will enter here if $DIRECTORY doesn't exist.
fi

However, as Jon Ericson points out, subsequent commands may not work as intended if you do not take into account that a symbolic link to a directory will also pass this check. E.g. running this:

ln -s "$ACTUAL_DIR" "$SYMLINK"
if [ -d "$SYMLINK" ]; then 
  rmdir "$SYMLINK" 
fi

Will produce the error message:

rmdir: failed to remove `symlink': Not a directory

So symbolic links may have to be treated differently, if subsequent commands expect directories:

if [ -d "$LINK_OR_DIR" ]; then 
  if [ -L "$LINK_OR_DIR" ]; then
    # It is a symlink!
    # Symbolic link specific commands go here.
    rm "$LINK_OR_DIR"
  else
    # It's a directory!
    # Directory command goes here.
    rmdir "$LINK_OR_DIR"
  fi
fi

Take particular note of the double-quotes used to wrap the variables. The reason for this is explained by 8jean in another answer.

If the variables contain spaces or other unusual characters it will probably cause the script to fail.

Bash – How to get the source directory of a Bash script from within the script itself

#!/usr/bin/env bash

SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"

is a useful one-liner which will give you the full directory name of the script no matter where it is being called from.

It will work as long as the last component of the path used to find the script is not a symlink (directory links are OK). If you also want to resolve any links to the script itself, you need a multi-line solution:

#!/usr/bin/env bash

SOURCE="${BASH_SOURCE[0]}"
while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
  DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"
  SOURCE="$(readlink "$SOURCE")"
  [[ $SOURCE != /* ]] && SOURCE="$DIR/$SOURCE" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
done
DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"

This last one will work with any combination of aliases, source, bash -c, symlinks, etc.

Beware: if you cd to a different directory before running this snippet, the result may be incorrect!

Also, watch out for $CDPATH gotchas, and stderr output side effects if the user has smartly overridden cd to redirect output to stderr instead (including escape sequences, such as when calling update_terminal_cwd >&2 on Mac). Adding >/dev/null 2>&1 at the end of your cd command will take care of both possibilities.

To understand how it works, try running this more verbose form:

#!/usr/bin/env bash

SOURCE="${BASH_SOURCE[0]}"
while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
  TARGET="$(readlink "$SOURCE")"
  if [[ $TARGET == /* ]]; then
    echo "SOURCE '$SOURCE' is an absolute symlink to '$TARGET'"
    SOURCE="$TARGET"
  else
    DIR="$( dirname "$SOURCE" )"
    echo "SOURCE '$SOURCE' is a relative symlink to '$TARGET' (relative to '$DIR')"
    SOURCE="$DIR/$TARGET" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
  fi
done
echo "SOURCE is '$SOURCE'"
RDIR="$( dirname "$SOURCE" )"
DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )"
if [ "$DIR" != "$RDIR" ]; then
  echo "DIR '$RDIR' resolves to '$DIR'"
fi
echo "DIR is '$DIR'"

And it will print something like:

SOURCE './scriptdir.sh' is a relative symlink to 'sym2/scriptdir.sh' (relative to '.')
SOURCE is './sym2/scriptdir.sh'
DIR './sym2' resolves to '/home/ubuntu/dotfiles/fo fo/real/real1/real2'
DIR is '/home/ubuntu/dotfiles/fo fo/real/real1/real2'

Best Answer

Related Solutions

Bash – How to check if a directory exists in a Bash shell script

Bash – How to get the source directory of a Bash script from within the script itself

Related Topic