Regex – How to match “anything up until this sequence of characters” in a regular expression

regex

Take this regular expression: /^[^abc]/. This will match any single character at the beginning of a string, except a, b, or c.

If you add a * after it – /^[^abc]*/ – the regular expression will continue to add each subsequent character to the result, until it meets either an a, or b, or c.

For example, with the source string "qwerty qwerty whatever abc hello", the expression will match up to "qwerty qwerty wh".

But what if I wanted the matching string to be "qwerty qwerty whatever "

…In other words, how can I match everything up to (but not including) the exact sequence "abc"?

Best Answer

You didn't specify which flavor of regex you're using, but this will work in any of the most popular ones that can be considered "complete".

/.+?(?=abc)/

How it works

The .+? part is the un-greedy version of .+ (one or more of anything). When we use .+, the engine will basically match everything. Then, if there is something else in the regex it will go back in steps trying to match the following part. This is the greedy behavior, meaning as much as possible to satisfy.

When using .+?, instead of matching all at once and going back for other conditions (if any), the engine will match the next characters by step until the subsequent part of the regex is matched (again if any). This is the un-greedy, meaning match the fewest possible to satisfy.

/.+X/  ~ "abcXabcXabcX"        /.+/  ~ "abcXabcXabcX"
          ^^^^^^^^^^^^                  ^^^^^^^^^^^^

/.+?X/ ~ "abcXabcXabcX"        /.+?/ ~ "abcXabcXabcX"
          ^^^^                          ^

Following that we have (?={contents}), a zero width assertion, a look around. This grouped construction matches its contents, but does not count as characters matched (zero width). It only returns if it is a match or not (assertion).

Thus, in other terms the regex /.+?(?=abc)/ means:

Match any characters as few as possible until a "abc" is found, without counting the "abc".

Related Solutions

Regex – regular expression to detect a valid regular expression

/
^                                             # start of string
(                                             # first group start
  (?:
    (?:[^?+*{}()[\]\\|]+                      # literals and ^, $
     | \\.                                    # escaped characters
     | \[ (?: \^?\\. | \^[^\\] | [^\\^] )     # character classes
          (?: [^\]\\]+ | \\. )* \]
     | \( (?:\?[:=!]|\?<[=!]|\?>)? (?1)?? \)  # parenthesis, with recursive content
     | \(\? (?:R|[+-]?\d+) \)                 # recursive matching
     )
    (?: (?:[?+*]|\{\d+(?:,\d*)?\}) [?+]? )?   # quantifiers
  | \|                                        # alternative
  )*                                          # repeat content
)                                             # end first group
$                                             # end of string
/

This is a recursive regex, and is not supported by many regex engines. PCRE based ones should support it.

Without whitespace and comments:

/^((?:(?:[^?+*{}()[\]\\|]+|\\.|\[(?:\^?\\.|\^[^\\]|[^\\^])(?:[^\]\\]+|\\.)*\]|\((?:\?[:=!]|\?<[=!]|\?>)?(?1)??\)|\(\?(?:R|[+-]?\d+)\))(?:(?:[?+*]|\{\d+(?:,\d*)?\})[?+]?)?|\|)*)$/

.NET does not support recursion directly. (The (?1) and (?R) constructs.) The recursion would have to be converted to counting balanced groups:

^                                         # start of string
(?:
  (?: [^?+*{}()[\]\\|]+                   # literals and ^, $
   | \\.                                  # escaped characters
   | \[ (?: \^?\\. | \^[^\\] | [^\\^] )   # character classes
        (?: [^\]\\]+ | \\. )* \]
   | \( (?:\?[:=!]
         | \?<[=!]
         | \?>
         | \?<[^\W\d]\w*>
         | \?'[^\W\d]\w*'
         )?                               # opening of group
     (?<N>)                               #   increment counter
   | \)                                   # closing of group
     (?<-N>)                              #   decrement counter
   )
  (?: (?:[?+*]|\{\d+(?:,\d*)?\}) [?+]? )? # quantifiers
| \|                                      # alternative
)*                                        # repeat content
$                                         # end of string
(?(N)(?!))                                # fail if counter is non-zero.

Compacted:

^(?:(?:[^?+*{}()[\]\\|]+|\\.|\[(?:\^?\\.|\^[^\\]|[^\\^])(?:[^\]\\]+|\\.)*\]|\((?:\?[:=!]|\?<[=!]|\?>|\?<[^\W\d]\w*>|\?'[^\W\d]\w*')?(?<N>)|\)(?<-N>))(?:(?:[?+*]|\{\d+(?:,\d*)?\})[?+]?)?|\|)*$(?(N)(?!))

From the comments:

Will this validate substitutions and translations?

It will validate just the regex part of substitutions and translations. s/<this part>/.../

It is not theoretically possible to match all valid regex grammars with a regex.

It is possible if the regex engine supports recursion, such as PCRE, but that can't really be called regular expressions any more.

Indeed, a "recursive regular expression" is not a regular expression. But this an often-accepted extension to regex engines... Ironically, this extended regex doesn't match extended regexes.

"In theory, theory and practice are the same. In practice, they're not." Almost everyone who knows regular expressions knows that regular expressions does not support recursion. But PCRE and most other implementations support much more than basic regular expressions.

using this with shell script in the grep command , it shows me some error.. grep: Invalid content of {} . I am making a script that could grep a code base to find all the files that contain regular expressions

This pattern exploits an extension called recursive regular expressions. This is not supported by the POSIX flavor of regex. You could try with the -P switch, to enable the PCRE regex flavor.

Regex itself "is not a regular language and hence cannot be parsed by regular expression..."

This is true for classical regular expressions. Some modern implementations allow recursion, which makes it into a Context Free language, although it is somewhat verbose for this task.

I see where you're matching []()/\. and other special regex characters. Where are you allowing non-special characters? It seems like this will match ^(?:[\.]+)$, but not ^abcdefg$. That's a valid regex.

[^?+*{}()[\]\\|] will match any single character, not part of any of the other constructs. This includes both literal (a - z), and certain special characters (^, $, .).

Regex – How to validate an email address using a regular expression

The fully RFC 822 compliant regex is inefficient and obscure because of its length. Fortunately, RFC 822 was superseded twice and the current specification for email addresses is RFC 5322. RFC 5322 leads to a regex that can be understood if studied for a few minutes and is efficient enough for actual use.

One RFC 5322 compliant regex can be found at the top of the page at http://emailregex.com/ but uses the IP address pattern that is floating around the internet with a bug that allows 00 for any of the unsigned byte decimal values in a dot-delimited address, which is illegal. The rest of it appears to be consistent with the RFC 5322 grammar and passes several tests using grep -Po, including cases domain names, IP addresses, bad ones, and account names with and without quotes.

Correcting the 00 bug in the IP pattern, we obtain a working and fairly fast regex. (Scrape the rendered version, not the markdown, for actual code.)

(?:[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*|"(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21\x23-\x5b\x5d-\x7f]|\\[\x01-\x09\x0b\x0c\x0e-\x7f])*")@(?:(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])?|\[(?:(?:(2(5[0-5]|[0-4][0-9])|1[0-9][0-9]|[1-9]?[0-9]))\.){3}(?:(2(5[0-5]|[0-4][0-9])|1[0-9][0-9]|[1-9]?[0-9])|[a-z0-9-]*[a-z0-9]:(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21-\x5a\x53-\x7f]|\\[\x01-\x09\x0b\x0c\x0e-\x7f])+)\])

or:

(?:[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*|"(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21\x23-\x5b\x5d-\x7f]|\\[\x01-\x09\x0b\x0c\x0e-\x7f])*")@(?:(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])?|\[(?:(?:(2(5[0-5]|[0-4][0-9])|1[0-9][0-9]|[1-9]?[0-9]))\.){3}(?:(2(5[0-5]|[0-4][0-9])|1[0-9][0-9]|[1-9]?[0-9])|[a-z0-9-]*[a-z0-9]:(?:[\x01-\x08\x0b\x0c\x0e-\x1f\x21-\x5a\x53-\x7f]|\\[\x01-\x09\x0b\x0c\x0e-\x7f])+)\])

Here is diagram of finite state machine for above regexp which is more clear than regexp itself

The more sophisticated patterns in Perl and PCRE (regex library used e.g. in PHP) can correctly parse RFC 5322 without a hitch. Python and C# can do that too, but they use a different syntax from those first two. However, if you are forced to use one of the many less powerful pattern-matching languages, then it’s best to use a real parser.

It's also important to understand that validating it per the RFC tells you absolutely nothing about whether that address actually exists at the supplied domain, or whether the person entering the address is its true owner. People sign others up to mailing lists this way all the time. Fixing that requires a fancier kind of validation that involves sending that address a message that includes a confirmation token meant to be entered on the same web page as was the address.

Confirmation tokens are the only way to know you got the address of the person entering it. This is why most mailing lists now use that mechanism to confirm sign-ups. After all, anybody can put down president@whitehouse.gov, and that will even parse as legal, but it isn't likely to be the person at the other end.

For PHP, you should not use the pattern given in Validate an E-Mail Address with PHP, the Right Way from which I quote:

There is some danger that common usage and widespread sloppy coding will establish a de facto standard for e-mail addresses that is more restrictive than the recorded formal standard.

That is no better than all the other non-RFC patterns. It isn’t even smart enough to handle even RFC 822, let alone RFC 5322. This one, however, is.

If you want to get fancy and pedantic, implement a complete state engine. A regular expression can only act as a rudimentary filter. The problem with regular expressions is that telling someone that their perfectly valid e-mail address is invalid (a false positive) because your regular expression can't handle it is just rude and impolite from the user's perspective. A state engine for the purpose can both validate and even correct e-mail addresses that would otherwise be considered invalid as it disassembles the e-mail address according to each RFC. This allows for a potentially more pleasing experience, like

The specified e-mail address 'myemail@address,com' is invalid. Did you mean 'myemail@address.com'?

See also Validating Email Addresses, including the comments. Or Comparing E-mail Address Validating Regular Expressions.

Debuggex Demo

Best Answer

How it works

Related Solutions

Regex – regular expression to detect a valid regular expression

Regex – How to validate an email address using a regular expression

Related Topic