How to set Content-Encoding with gzip

gziphttphttp-headers

I am compressing html files with gzip.
The browser (FF 3.0.10) does not decompress or display index.html.gz (pre-compressed on the server) when I request index.html

Where can I confirm the zipped header "content-encoding" and the browsers "Accept-Encoding"?
(I am using the zlib API in C for zipping)

Thanks.

Best Answer

if the browser sends

Accept-Encoding: gzip

you can compress the content of your http response, not the file on the server's file system. Then in your HTTP response you must set these headers:

Content-Length: totalBytes
Content-Encoding: gzip

Introduction

The correct minimum set of headers that works across all mentioned clients (and proxies):

Cache-Control: no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: 0

The Cache-Control is per the HTTP 1.1 spec for clients and proxies (and implicitly required by some clients next to Expires). The Pragma is per the HTTP 1.0 spec for prehistoric clients. The Expires is per the HTTP 1.0 and 1.1 specs for clients and proxies. In HTTP 1.1, the Cache-Control takes precedence over Expires, so it's after all for HTTP 1.0 proxies only.

If you don't care about IE6 and its broken caching when serving pages over HTTPS with only no-store, then you could omit Cache-Control: no-cache.

Cache-Control: no-store, must-revalidate
Pragma: no-cache
Expires: 0

If you don't care about IE6 nor HTTP 1.0 clients (HTTP 1.1 was introduced in 1997), then you could omit Pragma.

Cache-Control: no-store, must-revalidate
Expires: 0

If you don't care about HTTP 1.0 proxies either, then you could omit Expires.

Cache-Control: no-store, must-revalidate

On the other hand, if the server auto-includes a valid Date header, then you could theoretically omit Cache-Control too and rely on Expires only.

Date: Wed, 24 Aug 2016 18:32:02 GMT
Expires: 0

But that may fail if e.g. the end-user manipulates the operating system date and the client software is relying on it.

Other Cache-Control parameters such as max-age are irrelevant if the abovementioned Cache-Control parameters are specified. The Last-Modified header as included in most other answers here is only interesting if you actually want to cache the request, so you don't need to specify it at all.

How to set it?

Using PHP:

header("Cache-Control: no-cache, no-store, must-revalidate"); // HTTP 1.1.
header("Pragma: no-cache"); // HTTP 1.0.
header("Expires: 0"); // Proxies.

Using Java Servlet, or Node.js:

response.setHeader("Cache-Control", "no-cache, no-store, must-revalidate"); // HTTP 1.1.
response.setHeader("Pragma", "no-cache"); // HTTP 1.0.
response.setHeader("Expires", "0"); // Proxies.

Using ASP.NET-MVC

Response.Cache.SetCacheability(HttpCacheability.NoCache);  // HTTP 1.1.
Response.Cache.AppendCacheExtension("no-store, must-revalidate");
Response.AppendHeader("Pragma", "no-cache"); // HTTP 1.0.
Response.AppendHeader("Expires", "0"); // Proxies.

Using ASP.NET Web API:

// `response` is an instance of System.Net.Http.HttpResponseMessage
response.Headers.CacheControl = new CacheControlHeaderValue
{
    NoCache = true,
    NoStore = true,
    MustRevalidate = true
};
response.Headers.Pragma.ParseAdd("no-cache");
// We can't use `response.Content.Headers.Expires` directly
// since it allows only `DateTimeOffset?` values.
response.Content?.Headers.TryAddWithoutValidation("Expires", 0.ToString());

Using ASP.NET:

Response.AppendHeader("Cache-Control", "no-cache, no-store, must-revalidate"); // HTTP 1.1.
Response.AppendHeader("Pragma", "no-cache"); // HTTP 1.0.
Response.AppendHeader("Expires", "0"); // Proxies.

Using ASP.NET Core v3

// using Microsoft.Net.Http.Headers
Response.Headers[HeaderNames.CacheControl] = "no-cache, no-store, must-revalidate";
Response.Headers[HeaderNames.Expires] = "0";
Response.Headers[HeaderNames.Pragma] = "no-cache";

Using ASP:

Response.addHeader "Cache-Control", "no-cache, no-store, must-revalidate" ' HTTP 1.1.
Response.addHeader "Pragma", "no-cache" ' HTTP 1.0.
Response.addHeader "Expires", "0" ' Proxies.

Using Ruby on Rails:

headers["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
headers["Pragma"] = "no-cache" # HTTP 1.0.
headers["Expires"] = "0" # Proxies.

Using Python/Flask:

response = make_response(render_template(...))
response.headers["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
response.headers["Pragma"] = "no-cache" # HTTP 1.0.
response.headers["Expires"] = "0" # Proxies.

Using Python/Django:

response["Cache-Control"] = "no-cache, no-store, must-revalidate" # HTTP 1.1.
response["Pragma"] = "no-cache" # HTTP 1.0.
response["Expires"] = "0" # Proxies.

Using Python/Pyramid:

request.response.headerlist.extend(
    (
        ('Cache-Control', 'no-cache, no-store, must-revalidate'),
        ('Pragma', 'no-cache'),
        ('Expires', '0')
    )
)

Using Go:

responseWriter.Header().Set("Cache-Control", "no-cache, no-store, must-revalidate") // HTTP 1.1.
responseWriter.Header().Set("Pragma", "no-cache") // HTTP 1.0.
responseWriter.Header().Set("Expires", "0") // Proxies.

Using Clojure (require Ring utils):

(require '[ring.util.response :as r])
(-> response
  (r/header "Cache-Control" "no-cache, no-store, must-revalidate")
  (r/header "Pragma" "no-cache")
  (r/header "Expires" 0))

Using Apache .htaccess file:

<IfModule mod_headers.c>
    Header set Cache-Control "no-cache, no-store, must-revalidate"
    Header set Pragma "no-cache"
    Header set Expires 0
</IfModule>

Using HTML:

<meta http-equiv="Cache-Control" content="no-cache, no-store, must-revalidate">
<meta http-equiv="Pragma" content="no-cache">
<meta http-equiv="Expires" content="0">

HTML meta tags vs HTTP response headers

Important to know is that when an HTML page is served over an HTTP connection, and a header is present in both the HTTP response headers and the HTML <meta http-equiv> tags, then the one specified in the HTTP response header will get precedence over the HTML meta tag. The HTML meta tag will only be used when the page is viewed from a local disk file system via a file:// URL. See also W3 HTML spec chapter 5.2.2. Take care with this when you don't specify them programmatically because the webserver can namely include some default values.

Generally, you'd better just not specify the HTML meta tags to avoid confusion by starters and rely on hard HTTP response headers. Moreover, specifically those <meta http-equiv> tags are invalid in HTML5. Only the http-equiv values listed in HTML5 specification are allowed.

Verifying the actual HTTP response headers

To verify the one and the other, you can see/debug them in the HTTP traffic monitor of the web browser's developer toolset. You can get there by pressing F12 in Chrome/Firefox23+/IE9+, and then opening the "Network" or "Net" tab panel, and then clicking the HTTP request of interest to uncover all detail about the HTTP request and response. The below screenshot is from Chrome:

Chrome developer toolset HTTP traffic monitor showing HTTP response headers on stackoverflow.com

I want to set those headers on file downloads too

First of all, this question and answer are targeted on "web pages" (HTML pages), not "file downloads" (PDF, zip, Excel, etc). You'd better have them cached and make use of some file version identifier somewhere in the URI path or query string to force a redownload on a changed file. When applying those no-cache headers on file downloads anyway, then beware of the IE7/8 bug when serving a file download over HTTPS instead of HTTP. For detail, see IE cannot download foo.jsf. IE was not able to open this internet site. The requested site is either unavailable or cannot be found.

How to send a header using a HTTP request through a cURL call

man curl:

   -H/--header <header>
          (HTTP)  Extra header to use when getting a web page. You may specify
          any number of extra headers. Note that if you should  add  a  custom
          header that has the same name as one of the internal ones curl would
          use, your externally set header will be used instead of the internal
          one.  This  allows  you  to make even trickier stuff than curl would
          normally do. You should not replace internally set  headers  without
          knowing  perfectly well what you're doing. Remove an internal header
          by giving a replacement without content on the  right  side  of  the
          colon, as in: -H "Host:".

          curl  will  make sure that each header you add/replace get sent with
          the proper end of line marker, you should thus not  add  that  as  a
          part  of the header content: do not add newlines or carriage returns
          they will only mess things up for you.

          See also the -A/--user-agent and -e/--referer options.

          This option can be used multiple times to add/replace/remove  multi-
          ple headers.

Example:

curl --header "X-MyHeader: 123" www.google.com

You can see the request that curl sent by adding the -v option.