R – imagepicker+navigationController causing problems in iphone

iphoneobjective cuiimagepickercontrollerxcode

how do i do this..i have appliation delegate…in which i added uinavigation controller through code…

here is my code…

- (void)applicationDidFinishLaunching:(UIApplication *)application {    
HomeScreenController  *homeScreenobj=[[HomeScreenController alloc] initWithNibName:@"HomeScreen" bundle:[NSBundle mainBundle]];
navController = [[UINavigationController alloc] initWithRootViewController:homeScreenobj]; 
[homeScreenobj release];  
   [window addSubview:navController.view];

// Override point for customization after app launch    
 [window makeKeyAndVisible];
}

on homescreen i have a tabbar with three buttons here is an image

i want to take photo from library from imagepickerController…but getting weired issues

it is added to the main window i don't know why

here is an image for this

why this isn't shown fullscreen…. and also if i put this line

imagePickerController.allowsImageEditing = YES;

it hangs don't know why..here is my code to takePhoto….

-(IBAction)TakePhotoClicked
{
imagePickerController = [[UIImagePickerController alloc] init];
imagePickerController.allowsImageEditing = YES;
imagePickerController.delegate = self;
imagePickerController.sourceType = 
UIImagePickerControllerSourceTypePhotoLibrary;
//self.navigationController.navigationBar.hidden=YES;
[self.navigationController pushViewController:imagePickerController animated:NO];
//[imagePickerController release];
}

if i don't put this line to commented
//self.navigationController.navigationBar.hidden=YES;

it shows like this

where clicking on home button take back to home…

Best Answer

You have to present the UIImagePickerController as a modal view controller. So don't push your controller, but present it as modal:

[self.navigationController presentModalViewController:imagePickerController animated:YES];

You can pop the image picker using -[UINavigationController dismissModalViewControllerAnimated:] to go back to the last view controller on the stack.

Related Solutions

Ios – How to develop for iPhone using a Windows development machine

It's certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time :)

There are three routes;

Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
Run Mac OS X Server under VMWare (Mac OS X 10.7 (Lion) onwards, read the update below).
Use Delphi XE4 and the macincloud service. This is a commercial toolset, but the component and lib support is growing.

The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.

If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.

The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there's no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.

If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.

I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.

Alternatively, you could pick up a low-spec Mac Mini from eBay. You don't need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.

Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase

Html – Trouble loading html file from plist to webView on iPhone

You can try it this way:

NSString *bundle = [[NSBundle mainBundle] bundlePath];
NSString *webPath = [bundle stringByAppendingPathComponent:{htmlFilename}]
UIWebView* browser = [[UIWebView alloc] initWithFrame:
                              CGRectMake(0, 0, 200, 300)];
[browser loadRequest:[NSURLRequest requestWithURL:
                              [NSURL fileURLWithPath:webPath]]];
[self addSubview:browser];

You'll also want to set delegates on the browser so you get informed when the contents have finished loading.

Related Topic