Linux – ld: Using -rpath,$ORIGIN inside a shared library (recursive)

You are wrapping your entire Switch in a single Suspense, so all components will be lazily loaded at the same time. You probably only want each to be fetched/loaded when the specific route is rendered the first time.

<Switch>
  <Route
    exact
    path="/"
    render={props => (
      <Suspense fallback={<div>Loading...<div>}>
        <Home {...props} />
      </Suspense>
    )}
  />
  <Route
    exact
    path="/profile/:id"
    render={props => (
      <Suspense fallback={<div>Loading...<div>}>
        <Profile {...props} />
      </Suspense>
    )}
  />
  <Route
    exact
    path="/feed"
    render={() => (
      <Suspense fallback={<div>Loading...<div>}>
        <Feed isLogged={isLogged} user={user} {...props} />
      </Suspense>
    )}
  />
  <Route
    exact
    path="/settings"
    render={() => (
      <Suspense fallback={<div>Loading...<div>}>
        <Settings isLight={isLight} setIsLight={setIsLight} handleClick={handleClick} showBtn={showBtn} {...props} />
      </Suspense>
    )}
  />
  <Route
    render={() => <NotFound />}
  />
</Switch>

There is a lot of repetition here, so it is practical to factor out the suspense into a HOC.

const withSuspense = WrappedComponent => (
  <Suspense fallback={<div>Loading...<div>}>
    <WrappedComponent {...props} />
  </Suspense>
);

You can either decorate each perspective default export, i.e.

export default withSuspense(Home);

App.js

...
<Switch>
  <Route exact path="/" render={props => <Home {...props} />} />

or decorate them in your App

const HomeWithSuspense = withSuspense(Home);

...

<Switch>
  <Route
    exact
    path="/"
    render={props => <HomeWithSuspense {...props} />}
  />
  ...
</Switch>

I'm assuming you are using gcc and binutils.

If you do

readelf -d CeeloPartyServer | grep ORIGIN

You should get back the RPATH line you found above, but you should also see some entries about flags. The following is from a library that I built.

0x000000000000000f (RPATH)              Library rpath: [$ORIGIN/../lib]
0x000000000000001e (FLAGS)              ORIGIN
0x000000006ffffffb (FLAGS_1)            Flags: ORIGIN

If you aren't seeing some sort of FLAGS entries, you probably haven't told the linker to mark the object as requiring origin processing. With binutils ld, you do this by passing the -z origin flag.

I'm guessing you are using gcc to drive the link though, so in that case you will need to pass flag through the compiler by adding -Wl,-z,origin to your gcc link line.