I recently checked out the book "UNIX Network Programming, Vol. 1" by Richards Stevens and I found that there is a third transport layer standard besides TCP and UDP: SCTP.
Summary: SCTP is a transport-level protocol that is message-driven like UDP, but reliable like TCP. Here is a short introduction from IBM DeveloperWorks.
Honestly, I have never heard of SCTP before. I can't remember reading about it in any networking books or hearing about it in classes I had taken. Reading other stackoverflow questions that mentions SCTP suggests that I'm not alone with this lack of knowledge.
Why is SCTP so unknown? Why is it not much used?
Best Answer
Indeed, SCTP is used mostly in the telecom area. Traditionally, telecom switches use SS7 (Signaling System No. 7) to interconnect different entities in the telecom network. For example - the telecom provider's subscriber data base(HLR), with a switch (MSC), the subscriber is connected too (MSC).
The telecom area is moving to higher speeds and more reachable environment. One of these changes is to replace SS7 protocol by some more elegant, fast and flexible IP-based protocol.
The telecom area is very conservative. The SS7 network has been used here for decades. It is very a reliable and closed network. This means a regular user has no access to it.
The IP network, in contrast, is open and not reliable, and telecoms will not convert to it if it won't handle at least the load that SS7 handles. This is why SCTP was developed. It tries:
The latest releases of Linux already have SCTP support.